OpenControls Logo

STIG Viewer

STIGViewer Support

The SSMC web server must be configured to use a specified IP address and port.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-255258SSMC-WS-010090SV-255258r960966_ruleCCI-000382medium
Description
The web server must be configured to listen on a specified IP address and port. Without specifying an IP address and port for the web server to utilize, the web server will listen on all IP addresses available to the hosting server. If the web server has multiple IP addresses, i.e., a management IP address, the web server will also accept connections on the management IP address. Accessing the hosted application through an IP address normally used for nonapplication functions opens the possibility of user access to resources, utilities, files, ports, and protocols that are protected on the desired application IP address.
STIGDate
HPE 3PAR SSMC Web Server Security Technical Implementation Guide2024-05-30

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-01Configuration Management Program
1.00
CFG-03Least Functionality
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (33) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-17(1)Monitoring and Control
1.00
AC-17(2)Protection of Confidentiality and Integrity Using Encryption
1.00
AC-17(9)Disconnect or Disable Access
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00
AC-4Information Flow Enforcement
1.00
AC-6(8)Privilege Levels for Code Execution
1.00
AC-6(9)Log Use of Privileged Functions
1.00
AU-12Audit Record Generation
1.00

+23 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.4.6
1.00
CCI1 mapping
CCI-000382
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

PR.PS-01
1.00
PR.PS-05
1.00

Who does this work

5 NICE work roles and 5 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-255258r960966_chk)

Verify that SSMC web server is configured to listen on a specific network IP address, by doing the following: 1. Log on to ssmc appliance as ssmcadmin. Press "X" to escape to general bash shell. 2. Execute the command: $ sudo /ssmc/bin/config_security.sh -o webserver_service_network -a status Webserver service is listening on <ip_address> If the command output does not display a specific IP address assigned to the SSMC host but reads "default IP address", this is a finding.

Fix Text (F-58815r869942_fix)

Configure SSMC web server to listen on a specified network IP address by doing the following: 1. Log on to ssmc appliance as ssmcadmin; escape to general bash shell. 2. Edit (using vi editor) file /ssmc/conf/security_config.properties and set the property ssmc.webserver.service.network=<interface_name> The property value can be any of ens160 or ens192 in an ESX environment; eth0 or eth1 in a Hyper-V environment. 3. Execute the command: $ sudo /ssmc/bin/config_security.sh -o webserver_service_network -a set -f