OpenControls Logo

STIG Viewer

STIGViewer Support

The HP FlexFabric switch must be configured to send SNMP traps and notifications to the SNMP manager for the purpose of sending alarms and notifying appropriate personnel as required by specific events.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-217486HFFS-ND-000143SV-217486r961863_ruleCCI-000366medium
Description
If appropriate actions are not taken when a network device failure occurs, a denial of service condition may occur which could result in mission failure since the network would be operating without a critical security monitoring and prevention function. Upon detecting a failure of network device security components, the HP FlexFabric Switch must activate a system alert message, send an alarm, or shut down. By immediately displaying an alarm message, potential security violations can be identified more quickly even when administrators are not logged on to the device. This can be facilitated by the switch sending SNMP traps to the SNMP manager that can then have the necessary action taken by automatic or operator intervention.
STIGDate
HP FlexFabric Switch NDM Security Technical Implementation Guide2025-06-12

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (8) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-01Configuration Management Program
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
MON-01Continuous Monitoring
1.00
MON-01.7File Integrity Monitoring (FIM)
1.00
CFG-02Secure Baseline Configurations
0.50
CFG-02.7Approved Configuration Deviations
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (100) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-12Session Termination
1.00
AC-16(1)Dynamic Attribute Association
1.00
AC-17(1)Monitoring and Control
1.00
AC-2Account Management
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-24(1)Transmit Access Authorization Information
1.00
AC-25Reference Monitor
1.00

+90 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.4.1
1.00
3.4.2
1.00
CCI1 mapping
CCI-000366
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
PR.PS-01
1.00
PR.DS-10
0.50
PR.PSPlatform Security
0.50
PR.PS-05
0.50

Who does this work

10 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-217486r961863_chk)

Determine if the HP FlexFabric Switch is configured to send system alert messages, alarms to a SNMP agent and/or automatically shuts down when a component failure is detected. [HP] display current-configuration snmp-agent snmp-agent local-engineid 800063A280D07E28ECBDB800000001 snmp-agent sys-info version v3 snmp-agent group v3 group1 privacy snmp-agent target-host trap address udp-domain 192.168.16.103 params securityname snmp1 v3 privacy snmp-agent usm-user v3 user1 group1 cipher authentication-mode sha $c$3$3C41avdWWmRMT64buQYb6FLdhVIUpAVHhIGyxIMhX6o3Qe3+GjY= privacy-mode aes128 $c$3$YpvVDasCitD9iCUvGc01ycckCq0rY+c6sThoqny+TjMTlQ== If the HP FlexFabric Switch is not configured to send system alert messages and alarms to a SNMP agent and/or does not automatically shuts down when a component failure is detected, this is a finding.

Fix Text (F-18708r293134_fix)

Configure the HP FlexFabric Switch to send system alert messages and alarms to a SNMP agent: [HP]snmp-agent [HP]snmp-agent sys-info version v3 [HP]snmp-agent group v3 group1 privacy [HP]snmp-agent target-host trap address udp-domain 192.168.16.103 params securityname snmp1 v3 privacy [HP]snmp-agent usm-user v3 user1 group1 simple authentication-mode xxxxxxxxx privacy-mode aes128 xxxxxxxxx