OpenControls Logo

STIG Viewer

STIGViewer Support

Google Android 15 must be configured to enforce a password for Wi-Fi and Bluetooth hotspot, if approved for use by the authorizing official (AO). If not approved for use, Wi-Fi and Bluetooth hotspot must be disabled.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-267549GOOG-15-009950SV-267549r1031832_ruleCCI-000366medium
Description
Wi-Fi and Bluetooth hotspot use may increase the risk for exposing sensitive DOD data for some use cases, therefore it should be disabled unless approved by the AO. When a DOD mobile phone is used as a Wi-Fi or Bluetooth hotspot, a hotspot password must be enabled, otherwise unauthorized devices could connect to the DOD hotspot which may increase the risk of exposure of sensitive DOD data and/or a performance degradation of the DOD mobile phone. SFRID: FMT_SMF_EXT.1.1 / WLAN #3
STIGDate
Google Android 15 COPE Security Technical Implementation Guide2026-02-12

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (8) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-01Configuration Management Program
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
MON-01Continuous Monitoring
1.00
MON-01.7File Integrity Monitoring (FIM)
1.00
CFG-02Secure Baseline Configurations
0.50
CFG-02.7Approved Configuration Deviations
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (100) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-12Session Termination
1.00
AC-16(1)Dynamic Attribute Association
1.00
AC-17(1)Monitoring and Control
1.00
AC-2Account Management
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-24(1)Transmit Access Authorization Information
1.00
AC-25Reference Monitor
1.00

+90 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.4.1
1.00
3.4.2
1.00
CCI1 mapping
CCI-000366
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
PR.PS-01
1.00
PR.DS-10
0.50
PR.PSPlatform Security
0.50
PR.PS-05
0.50

Who does this work

10 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-267549r1031832_chk)

Review device configuration, user training, and determine if the AO has approved hotspot use. If the AO has not approved hotspot use, verify hotspot use has been disabled: On the EMM console: COBO: 1. Open "Set user restrictions". 2. Verify "Disallow config tethering" is toggled to "ON". COPE: 1. Open "Set user restrictions on parent". 2. Toggle "Disallow config tethering" to "ON". On the managed Google Android 15 device: COBO and COPE: 1. Go to Settings >> Network & Internet. 2. Verify "Hotspot & tethering" is "Controlled by admin". 3. Verify that tapping "Hotspot & tethering" provides a prompt to the user specifying "Action not allowed". If on the managed Google Android 15 device "Hotspot & tethering" is enabled, this is a finding. If hotspot use has been approved, verify the user has been trained to use the default hotspot password. See GOOG-15-009800 for procedure. If users are not trained to use the default hotspot password, this is a finding.

Fix Text (F-71376r1031831_fix)

Disable hotspot functions on the DOD phone if not approved by the AO. On the EMM console: COBO: 1. Open "Set user restrictions". 2. Toggle "Disallow config tethering" to "ON". COPE: 1. Open "Set user restrictions on parent". 2. Toggle "Disallow config tethering" to "ON". If the use of Wi-Fi and Bluetooth hotspots has been approved by the AO, train the user to not change the default hotspot password (see GOOG-15-009800). By default, when Wi-Fi Hotspot is enabled, a 15-character complex password is automatically configured for the hotspot.