STIGViewer Support

The premise firewall (located behind the premise router) must block all outbound management traffic.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-206707SRG-NET-000364-FW-000035SV-206707r855867_ruleCCI-002403medium
Description
The management network must still have its own subnet in order to enforce control and access boundaries provided by Layer 3 network nodes such as routers and firewalls. Management traffic between the managed network elements and the management network is routed via the same links and nodes as that used for production or operational traffic. Safeguards must be implemented to ensure that the management traffic does not leak past the managed network's premise equipment. If a firewall is located behind the premise router, all management traffic must be blocked at that point, with the exception of management traffic destined to premise equipment.
STIGDate
Firewall Security Requirements Guide2024-12-04

Related Frameworks

1 mapping across 3 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

NET-03Boundary Protection
0.50
NET-04.1Deny Traffic by Default & Allow Traffic by Exception
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (8) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CM-6Configuration Settings
1.00
SC-24Fail in Known State
1.00
SC-47Alternate Communications Paths
1.00
SC-5Denial-of-service Protection
1.00
SC-7Boundary Protection
1.00
SC-7(11)Restrict Incoming Communications Traffic
1.00
SC-7(29)Separate Subnets to Isolate Functions
1.00
SC-7(5)Deny by Default — Allow by Exception
1.00
CCI1 mapping

Details

Check Text (C-206707r855867_chk)

Review the firewall configuration to verify that it is blocking all outbound management traffic. If the firewall is not blocking management network from leaking to outside networks, this is a finding.

Fix Text (F-6964r297901_fix)

With the exception of management traffic destined to perimeter equipment, configure a firewall located behind the premise router to block all outbound management traffic.