OpenControls Logo

STIG Viewer

STIGViewer Support

The firewall must be configured to use filters that use packet headers and packet attributes, including source and destination IP addresses and ports, to prevent the flow of unauthorized or suspicious traffic between interconnected networks with different security policies (including perimeter firewalls and server VLANs).

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-206674SRG-NET-000019-FW-000003SV-206674r604133_ruleCCI-001414high
Description
Information flow control regulates where information is allowed to travel within a network and between interconnected networks. Blocking or restricting detected harmful or suspicious communications between interconnected networks enforces approved authorizations for controlling the flow of traffic. The firewall that filters traffic outbound to interconnected networks with different security policies must be configured with filters (i.e., rules, access control lists [ACLs], screens, and policies) that permit, restrict, or block traffic based on organization-defined traffic authorizations. Filtering must include packet header and packet attribute information, such as IP addresses and port numbers. Configure filters to perform certain actions when packets match specified attributes, including the following actions: - Apply a policy - Accept, reject, or discard the packets - Classify the packets based on their source address - Evaluate the next term in the filter - Increment a packet counter - Set the packets’ loss priority - Specify an IPsec SA (if IPsec is used in the implementation) - Specify the forwarding path - Write an alert or message to the system log
STIGDate
Firewall Security Requirements Guide2024-12-04

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (17) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AST-04Network Diagrams & Data Flow Diagrams (DFDs)
1.00
AST-04.2Control Applicability Boundary Graphical Representation
1.00
CFG-02Secure Baseline Configurations
1.00
CRY-01Use of Cryptographic Controls
1.00
DCH-01Data Protection
1.00
DCH-19Geographic Location of Data
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
IAC-21Least Privilege
1.00

+7 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (7) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-3Access Enforcement
1.00
AC-4Information Flow Enforcement
1.00
AC-6(9)Log Use of Privileged Functions
1.00
AU-12Audit Record Generation
1.00
CM-7Least Functionality
1.00
SC-5Denial-of-service Protection
1.00
SC-7(5)Deny by Default — Allow by Exception
1.00
NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.1.3
1.00
CCI1 mapping
CCI-001414
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (4) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
ID.AM-03
1.00
PR.DS-10
1.00
PR.IR-01
1.00

Who does this work

18 NICE work roles and 10 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-206674r604133_chk)

Verify the firewall is configured to use filters to restrict or block information system services based on best practices, known threats, and guidance in the Ports, Protocols, Services Management (PPSM) database regarding restrictions for boundary crossing for ports, protocols, and services. If the firewall cannot be configured with filters that employ packet header and packet attributes, including source and destination IP addresses and ports, to prevent the flow of unauthorized or suspicious traffic between interconnected networks with different security policies, this is a finding.

Fix Text (F-6931r297802_fix)

Configure filters in the firewall to examine characteristics of incoming and outgoing packets, including but not limited to the following: - Bit fields in the packet header, including IP fragmentation flags, IP options, and TCP flags - IP version 4 (IPv4) numeric range, including destination port, DiffServ code point (DSCP) value, fragment offset, Internet Control Message Protocol (ICMP) code, ICMP packet type, interface group, IP precedence, packet length, protocol, and TCP and UDP source and destination port - IP version 6 (IPv6) numeric range, including class of service (CoS) priority, destination address, destination port, ICMP code, ICMP packet type, interface group, IP address, next header, packet length, source address, source port, and TCP and UDP source and destination port - Source and destination address and prefix list