OpenControls Logo

STIG Viewer

STIGViewer Support

The Session Border Controller (SBC) (or similar firewall type device) must deny all packets traversing the enclave boundary (inbound or outbound) through the IP port pinholes opened for VVoIP sessions, except RTP/RTCP, SRTP/SRTCP, or other protocol/flow established by signaling messages.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-259935SRG-VOIP-000550SV-259935r948781_ruleCCI-001548high
Description
Once a pinhole is opened in the enclave boundary for a known session, the packets that are permitted to pass must be managed. If they are not properly managed, packets that are not part of a known session may traverse a pinhole, giving unauthorized access to the enclave's LAN or connected hosts. Another method for managing packets through a pinhole opened for a VVoIP session is to only permit packets to pass matching the expected protocol type, such as RTP/RTCP or SRTP/SRTCP. If only RTP/RTCP or SRTP/SRTCP packets are permitted to pass, this reduces the exposure presented to the enclave by the open pinhole. Additional flows or protocols may be permitted if specifically required for an approved function and establishment is signaled or controlled by the signaling protocol in use by the system. An example of this is the transmission of H.281 far end camera control messages for a video conferencing session. Using AS-SIP for signaling, a UDP-based 6.4kbps H.224 over RTP control channel over which the H.281 far end camera control messages are transmitted might be established along with the media streams. This additional flow would require additional pinholes.
STIGDate
Enterprise Voice, Video, and Messaging Policy Security Requirements Guide2025-12-23

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (17) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AST-04Network Diagrams & Data Flow Diagrams (DFDs)
1.00
AST-04.2Control Applicability Boundary Graphical Representation
1.00
CFG-02Secure Baseline Configurations
1.00
CRY-01Use of Cryptographic Controls
1.00
DCH-01Data Protection
1.00
DCH-19Geographic Location of Data
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
IAC-21Least Privilege
1.00

+7 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-4Information Flow Enforcement
1.00
NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.1.3
1.00
CCI1 mapping
CCI-001548
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (4) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
ID.AM-03
1.00
PR.DS-10
1.00
PR.IR-01
1.00

Who does this work

18 NICE work roles and 10 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-259935r948781_chk)

Verify the DISN NIPRNet boundary SBC is configured to deny all packets attempting to traverse the enclave boundary (inbound or outbound) through the IP port pinholes opened for VVoIP sessions that are not an approved protocol. The allowed protocols are RTP/RTCP, SRTP/SRTCP, and other approved protocols/flows established by signaling messages. This requires filtering on protocol type. If the DISN NIPRNet boundary SBC does not deny all packets traversing the enclave boundary (inbound or outbound) through the IP port pinholes opened for VVoIP sessions, except approved protocols, this is a finding. If packets that are not RTP/RTCP or SRTP/SRTCP (or other approved packet type as established in the signaling messages) protocol packets can pass through the boundary SBC, this is a finding. NOTE: The VVoIP system may allow SIP and SRTP traffic encrypted and encapsulated on port 443 from cloud service providers.

Fix Text (F-63573r946725_fix)

Configure the DISN NIPRNet boundary SBC to drop any packet attempting to traverse the enclave boundary (inbound or outbound) through the IP port pinholes opened for VVoIP sessions that is not an RTP/RTCP or SRTP/SRTCP packet or other approved protocol/flow established by the signaling messages. NOTE: The VVoIP system may allow SIP and SRTP traffic encrypted and encapsulated on port 443 from cloud service providers.