OpenControls Logo

STIG Viewer

STIGViewer Support

AlmaLinux OS 9 must not accept router advertisements on all IPv6 interfaces.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-269243ALMA-09-018500SV-269243r1050125_ruleCCI-000366medium
Description
An illicit router advertisement message could result in a man-in-the-middle attack.
STIGDate
Cloud Linux AlmaLinux OS 9 Security Technical Implementation Guide2026-02-27

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (8) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-01Configuration Management Program
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
MON-01Continuous Monitoring
1.00
MON-01.7File Integrity Monitoring (FIM)
1.00
CFG-02Secure Baseline Configurations
0.50
CFG-02.7Approved Configuration Deviations
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (100) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-12Session Termination
1.00
AC-16(1)Dynamic Attribute Association
1.00
AC-17(1)Monitoring and Control
1.00
AC-2Account Management
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-24(1)Transmit Access Authorization Information
1.00
AC-25Reference Monitor
1.00

+90 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.4.1
1.00
3.4.2
1.00
CCI1 mapping
CCI-000366
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
PR.PS-01
1.00
PR.DS-10
0.50
PR.PSPlatform Security
0.50
PR.PS-05
0.50

Who does this work

10 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-269243r1050125_chk)

Note: If IPv6 is disabled on the system, this requirement is Not Applicable. Verify AlmaLinux OS 9 does not accept router advertisements on any IPv6 interfaces, unless the system is a router. Determine if router advertisements are not accepted by using the following command: $ sysctl -a | grep 'accept_ra ' net.ipv6.conf.all.accept_ra = 1 net.ipv6.conf.default.accept_ra = 1 net.ipv6.conf.enp1s0.accept_ra = 0 net.ipv6.conf.lo.accept_ra = 1 If any of the returned lines are not set to "0" and it is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.

Fix Text (F-73175r1049365_fix)

Configure AlmaLinux OS 9 to not accept router advertisements on all IPv6 interfaces unless the system is a router. Create a numbered *.conf file in /etc/sysctl.d/ with the following content: net.ipv6.conf.all.accept_ra = 0 net.ipv6.conf.default.accept_ra = 0 net.ipv6.conf.lo.accept_ra = 0 The system configuration files need to be reloaded for the changes to take effect. To reload the contents of the files, run the following command: $ sysctl –system