AlmaLinux OS 9 must not enable IP packet forwarding unless the system is a router.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
| V-269249 | ALMA-09-019160 | SV-269249r1050131_rule | CCI-000366 | medium |
| Description | ||||
| Routing protocol daemons are typically used on routers to exchange network topology information with other routers. If this capability is used when not required, system network information may be unnecessarily transmitted across the network. | ||||
| STIG | Date | |||
| Cloud Linux AlmaLinux OS 9 Security Technical Implementation Guide | 2026-02-27 | |||
Related Frameworks
4 paths across 3 frameworks
Related Frameworks
NIST 800-531 mapping
CM-6
1.00
- DISA · V1R6 · disa_xccdf · related
- DISA · 2025-01-23 · disa_cci_list · equivalent
NIST 800-1712 mappings
3.4.1
1.00
- DISA · V1R6 · disa_xccdf · related
- DISA · 2025-01-23 · disa_cci_list · equivalent
- NIST · Rev 2 (Feb 2020, errata Jan 2021) · nist_800_171_app_d · equivalent
3.4.2
1.00
- DISA · V1R6 · disa_xccdf · related
- DISA · 2025-01-23 · disa_cci_list · equivalent
- NIST · Rev 2 (Feb 2020, errata Jan 2021) · nist_800_171_app_d · equivalent
CCI1 mapping
CCI-000366
1.00
- DISA · V1R6 · disa_xccdf · related
Details
Check Text (C-269249r1050131_chk)
Verify AlmaLinux OS 9 is not performing IP packet forwarding, unless the system is a router.
Check that IP forwarding is disabled using the following command:
$ sysctl -a | grep -E '\.forwarding'
net.ipv4.conf.all.forwarding = 0
net.ipv4.conf.default.forwarding = 0
net.ipv4.conf.enp1s0.forwarding = 0
net.ipv4.conf.lo.forwarding = 0
net.ipv6.conf.all.forwarding = 0
net.ipv6.conf.default.forwarding = 0
net.ipv6.conf.enp1s0.forwarding = 0
net.ipv6.conf.lo.forwarding = 0
If any of the returned lines are not set to "0" and it is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
Fix Text (F-73181r1049380_fix)
Configure AlmaLinux OS 9 to not allow IP packet forwarding, unless the system is a router.
Create a numbered *.conf file in /etc/sysctl.d/ with the following content:
net.ipv4.conf.all.forwarding = 0
net.ipv4.conf.default.forwarding = 0
net.ipv4.conf.lo.forwarding = 0
net.ipv6.conf.all.forwarding = 0
net.ipv6.conf.default.forwarding = 0
net.ipv6.conf.lo.forwarding = 0
The system configuration files need to be reloaded for the changes to take effect. To reload the contents of the files, run the following command:
$ sysctl –system