The Cisco Multicast Source Discovery Protocol (MSDP) switch must be configured to limit the amount of source-active messages it accepts on a per-peer basis.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
| V-221146 | CISC-RT-000940 | SV-221146r999755_rule | CCI-001368 | low |
| Description | ||||
| To reduce any risk of a denial-of-service (DoS) attack from a rogue or misconfigured MSDP switch, the switch must be configured to limit the number of source-active messages it accepts from each peer. | ||||
| STIG | Date | |||
| Cisco NX OS Switch RTR Security Technical Implementation Guide | 2024-12-20 | |||
Related Frameworks
3 paths across 3 frameworks
Related Frameworks
NIST 800-531 mapping
AC-4
1.00
- DISA · 3 · disa_xccdf · related
- DISA · 2025-01-23 · disa_cci_list · equivalent
NIST 800-1711 mapping
3.1.3
1.00
- DISA · 3 · disa_xccdf · related
- DISA · 2025-01-23 · disa_cci_list · equivalent
- NIST · Rev 2 (Feb 2020, errata Jan 2021) · nist_800_171_app_d · equivalent
CCI1 mapping
CCI-001368
1.00
- DISA · 3 · disa_xccdf · related
Details
Check Text (C-221146r999755_chk)
Review the switch configuration to determine if it is configured to limit the amount of source-active messages it accepts on a per-peer basis.
ip msdp peer x.1.28.2 connect-source Ethernet2/1 remote-as nn
…
…
…
ip msdp sa-limit x.1.28.2 nnn
If the switch is not configured to limit the source-active messages it accepts, this is a finding.
Fix Text (F-22850r409928_fix)
Configure the switch to limit the amount of source-active messages it accepts from each peer.
SW1(config)# ip msdp sa-limit x.1.28.2 nnn
SW1(config)# end