OpenControls Logo

STIG Viewer

STIGViewer Support

The Cisco BGP switch must be configured to reject outbound route advertisements for any prefixes belonging to the IP core.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-221107CISC-RT-000530SV-221107r999716_ruleCCI-001097medium
Description
Outbound route advertisements belonging to the core can result in traffic either looping or being black holed, or at a minimum, using a non-optimized path.
STIGDate
Cisco NX OS Switch RTR Security Technical Implementation Guide2026-03-04

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (18) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-02Secure Baseline Configurations
1.00
CRY-01Use of Cryptographic Controls
1.00
CRY-01.1Alternate Physical Protection
1.00
CRY-03Transmission Confidentiality
1.00
CRY-04Transmission Integrity
1.00
CRY-05Encrypting Data At Rest
1.00
DCH-01Data Protection
1.00
IAC-21Least Privilege
1.00
MON-01Continuous Monitoring
1.00
MON-01.1Intrusion Detection & Prevention Systems (IDS & IPS)
1.00

+8 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (10) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CM-6Configuration Settings
1.00
SC-24Fail in Known State
1.00
SC-47Alternate Communications Paths
1.00
SC-5Denial-of-service Protection
1.00
SC-7Boundary Protection
1.00
SC-7(11)Restrict Incoming Communications Traffic
1.00
SC-7(29)Separate Subnets to Isolate Functions
1.00
SC-7(5)Deny by Default — Allow by Exception
1.00
SI-4System Monitoring
1.00
SI-4(11)Analyze Communications Traffic Anomalies
1.00
NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.13.1
1.00
3.13.2
1.00
3.13.5
1.00
CCI1 mapping
CCI-001097
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-01
1.00
PR.DS-01
1.00
PR.DS-02
1.00
PR.DS-10
1.00
PR.IR-01
1.00

Who does this work

15 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-221107r999716_chk)

Step 1: Verify that a prefix list has been configured containing prefixes belonging to the IP core. ip prefix-list FILTER_CORE_PREFIXES seq 5 deny x.1.1.0/24 le 32 ip prefix-list FILTER _CORE_PREFIXES seq 10 deny x.1.2.0/24 le 32 ip prefix-list FILTER _CORE_PREFIXES seq 15 permit 0.0.0.0/0 ge 8 Step 2: Verify that the prefix lists has been applied to all external BGP peers as shown in the example below: router bgp xx router-id 10.1.1.1 neighbor x.1.12.2 remote-as xx password 3 7b07d1b3023056a9 address-family ipv4 unicast FILTER _CORE_PREFIXES out neighbor x.2.44.4 remote-as xx password 3 f07a10cb41db8bb6f8f0a340049a9b02 address-family ipv4 unicast prefix-list FILTER _CORE_PREFIXES out If the switch is not configured to reject outbound route advertisements for prefixes belonging to the IP core, this is a finding.

Fix Text (F-22811r409811_fix)

Step 1: Configure a prefix list for containing all customer and local AS prefixes as shown in the example below: SW1(config)# ip prefix-list FILTER_CORE_PREFIXES deny x.1.1.0/24 le 32 SW1(config)# ip prefix-list FILTER _CORE_PREFIXES deny x.1.2.0/24 le 32 SW1(config)# ip prefix-list FILTER _CORE_PREFIXES permit 0.0.0.0/0 ge 8 Step 2: Apply the prefix list filter outbound to each CE neighbor as shown in the example below: SW1(config)# router bgp xx SW1(config-router)# neighbor x.1.12.2 SW1(config-router-neighbor)# address-family ipv4 unicast SW1(config-router-neighbor-af)# prefix-list FILTER _CORE_PREFIXES out SW1(config-router-neighbor-af)# exit SW1(config-router-neighbor)# exit SW1(config-router)# neighbor x.2.44.4 SW1(config-router-neighbor)# address-family ipv4 unicast SW1(config-router-neighbor-af)# prefix-list FILTER _CORE_PREFIXES out SW1(config-router-neighbor-af)# end