OpenControls Logo

STIG Viewer

STIGViewer Support

The Cisco perimeter switch must be configured to restrict it from accepting outbound IP packets that contain an illegitimate address in the source address field via egress filter or by enabling Unicast Reverse Path Forwarding (uRPF).

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-221091CISC-RT-000310SV-221091r999700_ruleCCI-001094high
Description
A compromised host in an enclave can be used by a malicious platform to launch cyberattacks on third parties. This is a common practice in "botnets", which are a collection of compromised computers using malware to attack other computers or networks. DDoS attacks frequently leverage IP source address spoofing to send packets to multiple hosts that in turn will then send return traffic to the hosts with the IP addresses that were forged. This can generate significant amounts of traffic. Therefore, protection measures to counteract IP source address spoofing must be taken. When uRPF is enabled in strict mode, the packet must be received on the interface that the device would use to forward the return packet, thereby mitigating IP source address spoofing.
STIGDate
Cisco NX OS Switch RTR Security Technical Implementation Guide2026-03-04

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CAP-02Resource Priority
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (16) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-3Access Enforcement
1.00
AC-6(10)Prohibit Non-privileged Users from Executing Privileged Functions
1.00
AC-6(8)Privilege Levels for Code Execution
1.00
CM-11(2)Software Installation with Privileged Status
1.00
CM-5(1)Automated Access Enforcement and Audit Records
1.00
CM-5(6)Limit Library Privileges
1.00
CM-6Configuration Settings
1.00
CM-7Least Functionality
1.00
CM-7(2)Prevent Program Execution
1.00
SC-18(1)Identify Unacceptable Code and Take Corrective Actions
1.00

+6 more (top 10 by confidence shown)

CCI1 mapping
CCI-001094
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 4 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

PR.IR-04
0.50

Details

Check Text (C-221091r999700_chk)

Review the switch configuration to verify uRPF or an egress ACL has been configured on all internal interfaces to restrict the switch from accepting outbound IP packets that contain an illegitimate address in the source address field. uRPF example interface Ethernet2/4 description downstream link to LAN no switchport ip address 10.1.12.1/24 ip verify unicast source reachable-via rx Egress ACL example ip access-list EGRESS_FILTER 10 permit udp 10.1.15.0/24 any eq domain 20 permit tcp 10.1.15.0/24 any eq ftp 30 permit tcp 10.1.15.0/24 any eq ftp-data 40 permit tcp 10.1.15.0/24 any eq www 50 permit icmp 10.1.15.0/24 any 60 permit icmp 10.1.15.0/24 any echo 70 deny ip any any … … … interface Ethernet2/4 description downstream link to LAN no switchport ip access-group EGRESS_FILTER in ip address 10.1.12.1/24 If uRPF or an egress ACL to restrict the switch from accepting outbound IP packets that contain an illegitimate address in the source address field has not been configured on all internal interfaces in an enclave, this is a finding.

Fix Text (F-22795r409763_fix)

Configure the switch to ensure that an egress ACL or uRPF is configured on internal interfaces to restrict the switch from accepting any outbound IP packet that contains an illegitimate address in the source field. The example below enables uRPF. SW1(config)# int e2/4 SW1(config-if)# ip verify unicast source reachable-via rx SW1(config-if)# end