OpenControls Logo

STIG Viewer

STIGViewer Support

The Cisco ISE must terminate all network connections associated with a device management session at the end of the session, or the session must be terminated after six minutes of inactivity, except to fulfill documented and validated mission requirements.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-242657CSCO-NM-000520SV-242657r1167994_ruleCCI-001133high
Description
Terminating an idle session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended.
STIGDate
Cisco ISE NDM Security Technical Implementation Guide2026-06-03

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

NET-07Network Connection Termination
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (24) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-11Device Lock
1.00
AC-11(1)Pattern-hiding Displays
1.00
AC-12Session Termination
1.00
AC-12(2)Termination Message
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(2)Automated Temporary and Emergency Account Management
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-7Unsuccessful Logon Attempts
1.00

+14 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.13.9
1.00
CCI1 mapping
CCI-001133
1.00

Details

Check Text (C-242657r1167994_chk)

From the CLI EXEC mode, type show terminal. From the GUI, navigate to Administration >> System >> Admin Access >> Settings >> Session. View the session timeout setting. If the terminal and administration setting is not set to six minutes or less, this is a finding.

Fix Text (F-45889r1167993_fix)

Configure Session Timeout for Administrators. 1. Choose Administration >> System >> Admin Access >> Settings >> Session >> Session Timeout. 2. Enter "6". 3. Click "Save".