OpenControls Logo

STIG Viewer

STIGViewer Support

The Cisco ISE must record time stamps for audit records that can be mapped to Coordinated Universal Time (UTC).

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-242630CSCO-NM-000240SV-242630r1167990_ruleCCI-001890medium
Description
If time stamps are not consistently applied and there is no common time reference, it is difficult to perform forensic analysis. Time stamps generated by the application include date and time. Time is commonly expressed in Coordinated Universal Time (UTC), a modern continuation of Greenwich Mean Time (GMT).
STIGDate
Cisco ISE NDM Security Technical Implementation Guide2026-06-03

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-07Time Stamps
0.50
SEA-20Clock Synchronization
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (26) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-17(1)Monitoring and Control
1.00
AC-17(9)Disconnect or Disable Access
1.00
AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00
AC-6(9)Log Use of Privileged Functions
1.00
AU-12Audit Record Generation
1.00
AU-12(3)Changes by Authorized Individuals
1.00
AU-14(1)System Start-up
1.00
AU-14(2)Capture and Record Content
1.00
AU-3Content of Audit Records
1.00

+16 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.3.7
1.00
CCI1 mapping
CCI-001890
1.00

Details

Check Text (C-242630r1167990_chk)

1. View the clock setting: show clock 2. Verify the clock is set to use UTC. If the Cisco ISE does not use UTC, this is a finding.

Fix Text (F-45862r1167989_fix)

Change the clock to UTC using the CLI: clock timezone UTC Note: Sites may set the time zone to record time stamps in the local time zone (EDT) and then map to UTC.