OpenControls Logo

STIG Viewer

STIGViewer Support

The Cisco ISE must limit audit record storage capacity for all locally stored logs.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-242626CSCO-NM-000200SV-242626r961392_ruleCCI-001849medium
Description
In order to ensure network devices have a sufficient storage capacity in which to write the audit logs, they need to be able to allocate audit record storage capacity. The task of allocating audit record storage capacity is usually performed during initial device setup if it is modifiable. The value for the organization-defined audit record storage requirement will depend on the amount of storage available on the network device, the anticipated volume of logs, the frequency of transfer from the network device to centralized log servers, and other factors.
STIGDate
Cisco ISE NDM Security Technical Implementation Guide2026-06-03

Related Frameworks

1 mapping across 3 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-04Event Log Storage Capacity
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (14) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AU-12Audit Record Generation
1.00
AU-14(1)System Start-up
1.00
AU-3Content of Audit Records
1.00
AU-3(1)Additional Audit Information
1.00
AU-4Audit Log Storage Capacity
1.00
AU-4(1)Transfer to Alternate Storage
1.00
AU-5Response to Audit Logging Process Failures
1.00
AU-5(1)Storage Capacity Warning
1.00
AU-5(2)Real-time Alerts
1.00
AU-7Audit Record Reduction and Report Generation
1.00

+4 more (top 10 by confidence shown)

CCI1 mapping
CCI-001849
1.00

Details

Check Text (C-242626r961392_chk)

Examine the local log purge setting. show logging internal or Choose Administration >> System >> Logging >> Local Log Settings >> Local Log Storage Period. If local logs are set to purge after a locally established period, this is not a finding.

Fix Text (F-45858r714187_fix)

Configure syslog purge settings. Use the following process to delete local logs after a certain period of time. This is set based on the local environment and size of the implementation. 1. Choose Administration >> System >> Logging >> Local Log Settings. 2. In the Local Log Storage Period field, enter the maximum number of days to keep the log entries in the configuration source. 3. Click "Delete Logs Now" to delete the existing log files at any time before the expiration of the storage period. 4. Click "Save". Note: The system is designed to delete logs if the size of the localStore folder reaches 97 GB, regardless of the configured Local Log Storage Period.