STIGViewer Support

The Cisco ISE must use TLS 1.2, at a minimum, to protect the confidentiality of information passed between the endpoint agent and the Cisco ISE. This is This is required for compliance with C2C Step 1.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-242575CSCO-NC-000010SV-242575r812732_ruleCCI-000068high
Description
The agent may pass information about the endpoint to the Cisco ISE, which may be sensitive. Using older unauthorized versions or incorrectly configuring protocol negotiation makes the gateway vulnerable to known and unknown attacks that exploit vulnerabilities in this protocol.
STIGDate
Cisco ISE NAC Security Technical Implementation Guide2025-12-10

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

NET-14.2Protection of Confidentiality / Integrity Using Encryption
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (33) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-17(1)Monitoring and Control
1.00
AC-17(2)Protection of Confidentiality and Integrity Using Encryption
1.00
AC-3Access Enforcement
1.00
CM-6Configuration Settings
1.00
CM-6(1)Automated Management, Application, and Verification
1.00
CM-7Least Functionality
1.00
CM-7(1)Periodic Review
1.00
IA-2(8)Access to Accounts — Replay Resistant
1.00
IA-2(9)Network Access to Non-privileged Accounts — Replay Resistant
1.00
IA-3Device Identification and Authentication
1.00

+23 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.1.13
1.00
CCI1 mapping

Details

Check Text (C-242575r812732_chk)

If DoD is not at C2C Step 1 or higher, this is not a finding. Verify that only TLS 1.2 is enabled. From the Web Admin portal: 1. Navigate to Administration >> System >> Settings >> Security Settings. 2. Ensure "Allow TLS1.0", "Allow TLS1.1", and "Allow legacy unsafe TLS renegotiation for ISE as a client" are unchecked. If TLS 1.0 or 1.1 is enabled, this is a finding.

Fix Text (F-45807r714034_fix)

Configure ISE so that only TLS 1.2 is enabled: From the Web Admin portal: 1. Navigate to Administration >> System >> Settings >> Security Settings. 2. Ensure "Allow TLS1.0", "Allow TLS1.1", and "Allow legacy unsafe TLS renegotiation for ISE as a client" are unchecked.