OpenControls Logo

STIG Viewer

STIGViewer Support

The Cisco ISE must have a posture policy for posture required clients defined in the NAC System Security Plan (SSP). This is required for compliance with C2C Step 2.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-242606CSCO-NC-000320SV-242606r944368_ruleCCI-000366high
Description
Posture assessments can reduce the risk that clients impose on networks. The posture policy is the function that can link requirements to applicable clients. Multiple requirements can be associated with a single policy. However, multiple polices can also be applicable to the same client. The posture policy operates in such a way that all applicable policies are applied, versus the top-down first match approach.
STIGDate
Cisco ISE NAC Security Technical Implementation Guide2026-06-03

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (8) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-01Configuration Management Program
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
MON-01Continuous Monitoring
1.00
MON-01.7File Integrity Monitoring (FIM)
1.00
CFG-02Secure Baseline Configurations
0.50
CFG-02.7Approved Configuration Deviations
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (100) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-12Session Termination
1.00
AC-16(1)Dynamic Attribute Association
1.00
AC-17(1)Monitoring and Control
1.00
AC-2Account Management
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-24(1)Transmit Access Authorization Information
1.00
AC-25Reference Monitor
1.00

+90 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.4.1
1.00
3.4.2
1.00
CCI1 mapping
CCI-000366
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
PR.PS-01
1.00
PR.DS-10
0.50
PR.PSPlatform Security
0.50
PR.PS-05
0.50

Who does this work

10 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-242606r944368_chk)

If DOD is not at C2C Step 2 or higher, this is not a finding. If not required by the NAC SSP, this is not a finding. Verify the posture policy for posture required clients. 1. Navigate to Work Centers >> Posture >> Posture Policy. 2. Review the enabled posture policies to ensure posture required endpoints will process requirements. If there is not an enabled policy that will be applied to posture required endpoints, this is a finding.

Fix Text (F-45838r803571_fix)

If required by the NAC SSP, configure the posture policy for posture required clients. 1. Navigate to Work Centers >> Posture >> Posture Policy. 2. Choose the drop-down located next to "Edit" on the right side of the page where you want the new policy inserted. 3. Choose "Insert new policy". 4. Define a Name. 5. Select the applicable Identity Groups. 6. Select the applicable Operating Systems configured in the requirement previously created. 7. Select the Compliance Module configured in the requirement previously created. 8. Select the Posture Type configured in the requirement previously created. 9. Select Other Conditions if used. 10. Select the applicable Requirement or Requirements, ensuring there is a green check box to the left of the name indicating it is a mandatory requirement. 11. Choose "Done". 12. Choose "Save". Note: The user can apply multiple requirements to a single policy, or have multiple policies with a single policy with a single requirement as the posture policy operates in a "match-all" fashion.