OpenControls Logo

STIG Viewer

STIGViewer Support

The Cisco ISE must authenticate all endpoint devices before establishing a connection and proceeding with posture assessment. This is required for compliance with C2C Step 4.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-242601CSCO-NC-000270SV-242601r855858_ruleCCI-001958medium
Description
Without authenticating devices, unidentified or unknown devices may be introduced, thereby facilitating malicious activity. However, failure to authenticate an endpoint does not need to result in connection termination or preclude compliance assessment. This is particularly true for unmanaged systems or when the Cisco ISE is performing network discovery. Authentication methods for NAC on access switches are MAC Authentication Bypass (MAB), or 802.1x.
STIGDate
Cisco ISE NAC Security Technical Implementation Guide2026-06-03

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 4 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

IAC-01.2Authenticate, Authorize and Audit (AAA)
1.00
IAC-02Identification & Authentication for Organizational Users
1.00
IAC-03Identification & Authentication for Non-Organizational Users
1.00
IAC-04Identification & Authentication for Devices
1.00
IAC-05Identification & Authentication for Third-Party Technology Assets, Applications and/or Services (TAAS)
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (31) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-17(10)Authenticate Remote Commands
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(2)Automated Temporary and Emergency Account Management
1.00
AC-2(3)Disable Accounts
1.00
AC-7Unsuccessful Logon Attempts
1.00
CM-6Configuration Settings
1.00
CM-7Least Functionality
1.00
CM-7(9)Prohibiting The Use of Unauthorized Hardware
1.00
IA-11Re-authentication
1.00

+21 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.5.1
1.00
3.5.2
1.00
CCI1 mapping
CCI-001958
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

PR.AA-01
1.00
PR.AA-03
1.00
PR.AA-05
0.50

Who does this work

7 NICE work roles and 5 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-242601r855858_chk)

If DoD is not at C2C Step 4 or higher, this is not a finding. If not required by the NAC SSP, this is not a finding. Verify that the authorization policies have either "deny-access" or restricted access on their default authorization policy set. 1. Work Centers >> Network Access >> Policy Sets. 2. Choose ">" on the desired policy set. 3. Expand Authorization Policy. If the default authorization policy within each policy set has "deny-access" or restricted access, this is not a finding.

Fix Text (F-45833r803565_fix)

If required by the NAC SSP, configure each policy set so that authorization policies have either "deny-access" or restricted access on their default authorization policy set. 1. Work Centers >> Network Access >> Policy Sets. 2. Choose ">" on the desired policy set. 3. Expand Authorization Policy. On the default authorization rule, select "Deny-Access" or a result that is configured for a restricted VLAN, Access Control List, Scalable Group Tag, or any combination of these used to restrict access.