OpenControls Logo

STIG Viewer

STIGViewer Support

The Cisco ISE must generate a critical alert to be sent to the ISSO and SA (at a minimum) if it is unable to communicate with the central event log. This is required for compliance with C2C Step 1.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-242597CSCO-NC-000230SV-242597r812776_ruleCCI-000139medium
Description
It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without this notification, the security personnel may be unaware of an impending failure of the audit capability and system operation may be adversely affected. Audit processing failures include software/hardware errors, failures in the audit capturing mechanisms, and audit storage capacity being reached or exceeded. This requirement applies to each audit data storage repository (i.e., distinct information system component where log records are stored), the centralized audit storage capacity of organizations (i.e., all audit data storage repositories combined), or both.
STIGDate
Cisco ISE NAC Security Technical Implementation Guide2026-06-03

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-05Response To Event Log Processing Failures
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (20) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-2(4)Automated Audit Actions
1.00
AU-10Non-repudiation
1.00
AU-12Audit Record Generation
1.00
AU-12(1)System-wide and Time-correlated Audit Trail
1.00
AU-14(1)System Start-up
1.00
AU-4(1)Transfer to Alternate Storage
1.00
AU-5Response to Audit Logging Process Failures
1.00
AU-5(1)Storage Capacity Warning
1.00
AU-5(2)Real-time Alerts
1.00
AU-6(4)Central Review and Analysis
1.00

+10 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.3.4
1.00
CCI1 mapping
CCI-000139
1.00

Details

Check Text (C-242597r812776_chk)

If DoD is not at C2C Step 1 or higher, this is not a finding. Verify that a log will be generated and sent when a Logging Target becomes unavailable. From the Web Admin portal: 1. Choose Administration >> System >> Logging >> Logging Categories. 2. Verify that Internal Operations Diagnostics has "LogCollector" and "LogCollector2" set. If there are a minimum of two logging targets selected for Internal Operations Diagnostics, this is not a finding.

Fix Text (F-45829r714100_fix)

Configure a log to be generated and sent when a Logging Target becomes unavailable. From the Web Admin portal: 1. Choose Administration >> System >> Logging >> Logging Categories. 2. Configure the "Internal Operations Diagnostics" category Targets field to have "LogCollector" and "LogCollector2". If the environment has an additional SYSLOG server, it can be selected here as well. Note: "LogCollector" and "LogCollector2" are not configured for this category by default. These logs will be viewable at Operations >> Reports >> Reports >> Diagnostics >> System Diagnostic.