OpenControls Logo

STIG Viewer

STIGViewer Support

The Cisco ISE must send an alert to the system administrator, at a minimum, when endpoints fail the policy assessment checks for organization-defined infractions. This is required for compliance with C2C Step 3.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-242591CSCO-NC-000170SV-242591r812764_ruleCCI-000172medium
Description
Failing the Cisco ISE assessment, means that an unauthorized machine has attempted to access the secure network. Without generating log records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident, or identify those responsible for one. Log records can be generated from various components within the information system (e.g., module or policy filter).
STIGDate
Cisco ISE NAC Security Technical Implementation Guide2026-06-03

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (15) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
MON-01Continuous Monitoring
1.00
MON-01.1Intrusion Detection & Prevention Systems (IDS & IPS)
1.00
MON-01.3Inbound & Outbound Communications Traffic
1.00
MON-01.4System Generated Alerts
1.00
MON-01.7File Integrity Monitoring (FIM)
1.00
MON-01.8Security Event Monitoring
1.00
MON-03Content of Event Logs
1.00

+5 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (80) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-12Session Termination
1.00
AC-16Security and Privacy Attributes
1.00
AC-17(1)Monitoring and Control
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(10)Shared and Group Account Credential Change
1.00
AC-2(11)Usage Conditions
1.00
AC-2(2)Automated Temporary and Emergency Account Management
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00

+70 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.3.1
1.00
3.3.2
1.00
CCI1 mapping
CCI-000172
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (4) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-01
1.00
DE.CM-03
1.00
DE.CM-09
1.00
PR.PS-04
1.00

Who does this work

12 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-242591r812764_chk)

If DoD is not at C2C Step 3 or higher, this is not a finding. If not required by the NAC SSP, this is not a finding. Verify that an alarm will be generated and sent when an endpoint has a change in posture status. From the Web Admin portal: 1. Choose Administration >> System >> Logging >> Logging Categories. 2. Verify the Posture and Client Provisioning Audit has LogCollector set as a target at a minimum. If the Posture and Client Provisioning Audit logging category is not configured to send to the LogCollector and/or another logging target, this is a finding.

Fix Text (F-45823r803559_fix)

If required by the NAC SSP, configure an alarm to be generated and sent when an endpoint has a change in posture status. From the Web Admin portal: 1. Choose Administration >> System >> Logging >> Logging Categories. 2. Configure the "Posture and Client Provisioning Audit" category and the Targets field needs to have LogCollector selected at a minimum. This is the default setting. If the environment has an additional SYSLOG server, it can be selected here as well.