OpenControls Logo

STIG Viewer

STIGViewer Support

The Cisco ISE must be configured to notify the user before proceeding with remediation of the user's endpoint device when automated remediation is used. This is required for compliance with C2C Step 3.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-242582CSCO-NC-000080SV-242582r1146391_ruleCCI-000213low
Description
Notification will let the user know that installation is in progress and may take a while. This notice may deter the user from disconnecting and retrying the connection before the remediation is completed. Premature disconnections may increase network demand and frustrate the user. Note: This policy does not require remediation to be performed by the Cisco ISE, but will apply if remediation services are used.
STIGDate
Cisco ISE NAC Security Technical Implementation Guide2026-06-03

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (20) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-02Secure Baseline Configurations
1.00
CRY-01Use of Cryptographic Controls
1.00
DCH-01Data Protection
1.00
HRS-02Position Categorization
1.00
HRS-11Separation of Duties (SoD)
1.00
IAC-01Identity & Access Management (IAM)
1.00
IAC-01.2Authenticate, Authorize and Audit (AAA)
1.00
IAC-02Identification & Authentication for Organizational Users
1.00
IAC-03Identification & Authentication for Non-Organizational Users
1.00
IAC-04Identification & Authentication for Devices
1.00

+10 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (93) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-10Concurrent Session Control
1.00
AC-16Security and Privacy Attributes
1.00
AC-17(1)Monitoring and Control
1.00
AC-17(10)Authenticate Remote Commands
1.00
AC-17(2)Protection of Confidentiality and Integrity Using Encryption
1.00
AC-18(1)Authentication and Encryption
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(10)Shared and Group Account Credential Change
1.00
AC-2(11)Usage Conditions
1.00
AC-2(2)Automated Temporary and Emergency Account Management
1.00

+83 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.1.1
1.00
3.1.2
1.00
CCI1 mapping
CCI-000213
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

PR.AA-05
1.00
PR.DS-10
1.00
PR.IR-01
1.00

Who does this work

17 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-242582r1146391_chk)

If DoD is not at C2C Step 3 or higher, this is not a finding. If not required by the NAC SSP, this is not a finding. Verify that each requirement used has a message to display. 1. Navigate to Work Centers >> Posture >> Posture Policy. 2. Make a note of each "Requirement" tied to an enabled Posture Policy. 3. Navigate to Work Centers >> Posture >> Policy Elements >> Requirements. 4. Verify that each requirement noted has a message in the "Message Shown to Agent User" box. If a requirement that is used does not have a message, this is a finding.

Fix Text (F-45814r803532_fix)

If required by the NAC SSP, configure a message prior to remediation: 1. Navigate to Work Centers >> Posture >> Policy Elements >> Requirements. 2. On the requirements under "Remediation Actions", define a message in the "Message Shown to Agent User". 3. Choose "Done". 4. Choose "Save".