OpenControls Logo

STIG Viewer

STIGViewer Support

The Cisco ISE must be configured to profile endpoints connecting to the network. This is required for compliance with C2C Step 4.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-242577CSCO-NC-000030SV-242577r1146387_ruleCCI-000213high
Description
It is possible for endpoints to be manually added to an incorrect endpoint identity group. The endpoint policy can be dynamically set through profiling. If the endpoint group is statically set but the endpoint policy is set to dynamic, then it is possible to identify endpoints that may receive unintended access.
STIGDate
Cisco ISE NAC Security Technical Implementation Guide2026-06-03

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (20) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-02Secure Baseline Configurations
1.00
CRY-01Use of Cryptographic Controls
1.00
DCH-01Data Protection
1.00
HRS-02Position Categorization
1.00
HRS-11Separation of Duties (SoD)
1.00
IAC-01Identity & Access Management (IAM)
1.00
IAC-01.2Authenticate, Authorize and Audit (AAA)
1.00
IAC-02Identification & Authentication for Organizational Users
1.00
IAC-03Identification & Authentication for Non-Organizational Users
1.00
IAC-04Identification & Authentication for Devices
1.00

+10 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (93) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-10Concurrent Session Control
1.00
AC-16Security and Privacy Attributes
1.00
AC-17(1)Monitoring and Control
1.00
AC-17(10)Authenticate Remote Commands
1.00
AC-17(2)Protection of Confidentiality and Integrity Using Encryption
1.00
AC-18(1)Authentication and Encryption
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(10)Shared and Group Account Credential Change
1.00
AC-2(11)Usage Conditions
1.00
AC-2(2)Automated Temporary and Emergency Account Management
1.00

+83 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.1.1
1.00
3.1.2
1.00
CCI1 mapping
CCI-000213
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

PR.AA-05
1.00
PR.DS-10
1.00
PR.IR-01
1.00

Who does this work

17 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-242577r1146387_chk)

If DoD is not at C2C Step 4 or higher, this is not a finding. Verify the profiling service is configured and enabled. 1. Choose Administration >> System >> Deployment. 2. View the Deployment Nodes. Verify the following services are enabled via the check box: Policy Service Enable Session Services Enable Profiling Services If the Cisco ISE profiling service is not configured and enabled, this is a finding.

Fix Text (F-45809r714040_fix)

Configure the profiling service to provide a contextual inventory of all the endpoints that are using your network resources in any Cisco ISE-enabled network. 1. Choose Administration >> System >> Deployment. 2. Choose a Cisco ISE node that assumes the Policy Service persona. 3. Click "Edit" in the Deployment Nodes page. 4. On the "General Settings" tab, check the "Policy Service" check box. 5. Perform the following tasks: - Check the "Enable Session Services" check box. - Check the "Enable Profiling Services" check box to run the profiling service. 6. Click "Save" to save the node configuration.