The Cisco perimeter router must be configured to drop IPv6 undetermined transport packets.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
| V-230049 | CISC-RT-000392 | SV-230049r950991_rule | CCI-002403 | medium |
| Description | ||||
| One of the fragmentation weaknesses known in IPv6 is the undetermined transport packet. This packet contains an undetermined protocol due to fragmentation. Depending on the length of the IPv6 extension header chain, the initial fragment may not contain the layer four port information of the packet. | ||||
| STIG | Date | |||
| Cisco IOS XR Router RTR Security Technical Implementation Guide | 2025-08-19 | |||
Related Frameworks
1 mapping across 3 frameworks
Related Frameworks
SCF0 mappings
No source states a mapping between these directly.
Also reachable in 3 hops (2) derived by us, not asserted by any source
Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.
- DISA STIG Benchmark (XCCDF)V3R3intersects(normalised)
- DISA CCI List2025-01-23equal to(normalised)
- SCF Secure Traceability Relationship Mapping (STRM)2026.2intersects
- DISA STIG Benchmark (XCCDF)V3R3intersects(normalised)
- DISA CCI List2025-01-23equal to(normalised)
- SCF Secure Traceability Relationship Mapping (STRM)2026.2intersects
NIST 800-530 mappings
No source states a mapping between these directly.
Also reachable in 2 hops (8) derived by us, not asserted by any source
Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.
- DISA STIG Benchmark (XCCDF)V3R3intersects(normalised)
- DISA STIG Benchmark (XCCDF)3our copyintersects(normalised)
- DISA STIG Benchmark (XCCDF)3intersects(normalised)
- DISA CCI List2025-01-23equal to(normalised)
- DISA STIG Benchmark (XCCDF)V3R3intersects(normalised)
- DISA STIG Benchmark (XCCDF)V1R2our copyintersects(normalised)
- DISA STIG Benchmark (XCCDF)V1R2intersects(normalised)
- DISA CCI List2025-01-23equal to(normalised)
- DISA STIG Benchmark (XCCDF)V3R3intersects(normalised)
- DISA STIG Benchmark (XCCDF)V2R1our copyintersects(normalised)
- DISA STIG Benchmark (XCCDF)V2R1intersects(normalised)
- DISA CCI List2025-01-23equal to(normalised)
- DISA STIG Benchmark (XCCDF)V3R3intersects(normalised)
- DISA STIG Benchmark (XCCDF)V2R1our copyintersects(normalised)
- DISA STIG Benchmark (XCCDF)V2R1intersects(normalised)
- DISA CCI List2025-01-23equal to(normalised)
- DISA STIG Benchmark (XCCDF)V3R3intersects(normalised)
- DISA STIG Benchmark (XCCDF)V1R2our copyintersects(normalised)
- DISA STIG Benchmark (XCCDF)V1R2intersects(normalised)
- DISA CCI List2025-01-23equal to(normalised)
- DISA STIG Benchmark (XCCDF)V3R3intersects(normalised)
- DISA CCI List2025-01-23equal to(normalised)
- DISA STIG Benchmark (XCCDF)V3R3intersects(normalised)
- DISA STIG Benchmark (XCCDF)V3R4our copyintersects(normalised)
- DISA STIG Benchmark (XCCDF)V3R4intersects(normalised)
- DISA CCI List2025-01-23equal to(normalised)
- DISA STIG Benchmark (XCCDF)V3R3intersects(normalised)
- DISA STIG Benchmark (XCCDF)V1R2our copyintersects(normalised)
- DISA STIG Benchmark (XCCDF)V1R2intersects(normalised)
- DISA CCI List2025-01-23equal to(normalised)
CCI1 mapping
CCI-002403
1.00
- DISA STIG Benchmark (XCCDF)V3R3intersects(normalised)
Details
Check Text (C-230049r950991_chk)
This requirement is not applicable for the DODIN Backbone.
Review the router configuration to determine if it is configured to drop IPv6 undetermined transport packets.
Step 1: Verify that an inbound IPv6 ACL has been configured on the external interface.
interface interface gigabitethernet 0/2/0/2
ipv6 address 2001::1:0:22/64
ipv6 access-group FILTER_IPV6 ingress
Step 2: Verify that the ACL drops undetermined transport packets as shown in the example below.
ipv6 access-list FILTER_IPV6
10 deny ipv6 any any log undetermined-transport
20 permit ipv6 …
…
…
…
90 deny ipv6 any any log
If the router is not configured to drop IPv6 undetermined transport packets, this is a finding.
Fix Text (F-32334r856466_fix)
Configure the router to drop IPv6 undetermined transport packets as shown in the example below.
RP/0/0/CPU0:R3(config)# ipv6 access-list FILTER_IPV6
RP/0/0/CPU0:R3(config-ipv6-acl)# deny ipv6 any any undetermined-transport log
RP/0/0/CPU0:R3(config-ipv6-acl)# permit ipv6 …
…
…
…
RP/0/0/CPU0:R3(config-ipv6-acl)# deny ipv6 any any log
RP/0/0/CPU0:R3(config-ipv6-acl)# exit
RP/0/0/CPU0:R3(config)# interface gigabitethernet 0/2/0/2
RP/0/0/CPU0:R3(config-if)# ipv6 access-group FILTER_IPV6 ingress