OpenControls Logo

STIG Viewer

STIGViewer Support

The Cisco router must be configured to have all non-essential capabilities disabled.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-216741CISC-RT-000070SV-216741r531087_ruleCCI-000381low
Description
A compromised router introduces risk to the entire network infrastructure, as well as data resources that are accessible via the network. The perimeter defense has no oversight or control of attacks by malicious users within the network. Preventing network breaches from within is dependent on implementing a comprehensive defense-in-depth strategy, including securing each device connected to the network. This is accomplished by following and implementing all security guidance applicable for each node type. A fundamental step in securing each router is to enable only the capabilities required for operation.
STIGDate
Cisco IOS XR Router RTR Security Technical Implementation Guide2025-08-19

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-01Configuration Management Program
1.00
CFG-03Least Functionality
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (36) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-11Device Lock
1.00
AC-17(1)Monitoring and Control
1.00
AC-17(10)Authenticate Remote Commands
1.00
AC-17(9)Disconnect or Disable Access
1.00
AC-18(1)Authentication and Encryption
1.00
AC-2(1)Automated System Account Management
1.00
AC-3Access Enforcement
1.00
AC-4Information Flow Enforcement
1.00
AU-12Audit Record Generation
1.00
AU-3Content of Audit Records
1.00

+26 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.4.6
1.00
CCI1 mapping
CCI-000381
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

PR.PS-01
1.00
PR.PS-05
1.00

Who does this work

5 NICE work roles and 5 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-216741r531087_chk)

Review the router configuration to verify that the router does not have any unnecessary or non-secure services enabled. For example, the following commands should not be in the configuration: service ipv4 tcp-small-servers max-servers 10 service ipv4 udp-small-servers max-servers 10 http client vrf xxxxx telnet vrf default ipv4 server max-servers 1 If any unnecessary services are enabled, this is a finding.

Fix Text (F-17971r288616_fix)

Disable the following services if enabled as shown in the example below. RP/0/0/CPU0:R3(config)#no service ipv4 tcp-small-servers RP/0/0/CPU0:R3(config)#no service ipv4 udp-small-servers RP/0/0/CPU0:R3(config)#no http client vrf xxxxx RP/0/0/CPU0:R3(config)#no telnet ipv4 server