OpenControls Logo

STIG Viewer

STIGViewer Support

The Cisco router must be configured to generate an alert for all audit failure events.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-216534CISC-ND-001000SV-216534r991930_ruleCCI-001858medium
Description
It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without a real-time alert, security personnel may be unaware of an impending failure of the audit capability and system operation may be adversely affected. Alerts provide organizations with urgent messages. Real-time alerts provide these messages immediately (i.e., the time from event detection to alert occurs in seconds or less).
STIGDate
Cisco IOS XR Router NDM Security Technical Implementation Guide2026-02-26

Related Frameworks

1 mapping across 3 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-05.1Real-Time Alerts of Event Logging Failure
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (22) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-2(4)Automated Audit Actions
1.00
AU-12Audit Record Generation
1.00
AU-14(1)System Start-up
1.00
AU-3Content of Audit Records
1.00
AU-3(1)Additional Audit Information
1.00
AU-4Audit Log Storage Capacity
1.00
AU-4(1)Transfer to Alternate Storage
1.00
AU-5Response to Audit Logging Process Failures
1.00
AU-5(1)Storage Capacity Warning
1.00
AU-5(2)Real-time Alerts
1.00

+12 more (top 10 by confidence shown)

CCI1 mapping
CCI-001858
1.00

Details

Check Text (C-216534r991930_chk)

Review the Cisco router configuration to verify that it is compliant with this requirement as shown in the example below. logging 10.1.12.7 vrf default severity critical Note: The parameter "critical" can be replaced with a lesser severity level (i.e., error, warning, notice, informational). If the Cisco router is not configured to generate an alert for all audit failure events, this is a finding.

Fix Text (F-17766r288289_fix)

Configure the Cisco router to send critical to emergency log messages to the syslog server as shown in the example below. RP/0/0/CPU0:R3(config)#logging 10.1.12.7 severity critical Note: The parameter "critical" can replaced with a lesser severity level (i.e., error, warning, notice, informational).