OpenControls Logo

STIG Viewer

STIGViewer Support

The Cisco multicast Rendezvous Point (RP) switch must be configured to filter Protocol Independent Multicast (PIM) Register messages received from the Designated switch (DR) for any undesirable multicast groups and sources.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-221057CISC-RT-000830SV-221057r1137930_ruleCCI-001414low
Description
Real-time multicast traffic can entail multiple large flows of data. An attacker can flood a network segment with multicast packets, over-using the available bandwidth and thereby creating a denial-of-service (DoS) condition. Hence, it is imperative that register messages are accepted only for authorized multicast groups and sources.
STIGDate
Cisco IOS XE Switch RTR Security Technical Implementation Guide2026-03-04

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (17) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AST-04Network Diagrams & Data Flow Diagrams (DFDs)
1.00
AST-04.2Control Applicability Boundary Graphical Representation
1.00
CFG-02Secure Baseline Configurations
1.00
CRY-01Use of Cryptographic Controls
1.00
DCH-01Data Protection
1.00
DCH-19Geographic Location of Data
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
IAC-21Least Privilege
1.00

+7 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (7) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-3Access Enforcement
1.00
AC-4Information Flow Enforcement
1.00
AC-6(9)Log Use of Privileged Functions
1.00
AU-12Audit Record Generation
1.00
CM-7Least Functionality
1.00
SC-5Denial-of-service Protection
1.00
SC-7(5)Deny by Default — Allow by Exception
1.00
NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.1.3
1.00
CCI1 mapping
CCI-001414
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (4) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
ID.AM-03
1.00
PR.DS-10
1.00
PR.IR-01
1.00

Who does this work

18 NICE work roles and 10 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-221057r1137930_chk)

Verify that the RP is configured to filter PIM register messages. The example below will deny any multicast streams for groups 239.5.0.0/16 and allow from only sources x.1.2.6 and x.1.2.7. ip pim rp-address 10.1.12.3 ip pim accept-register list PIM_REGISTER_FILTER … … … ip access-list extended PIM_REGISTER_FILTER deny ip any 239.5.0.0 0.0.255.255 permit ip host x.1.2.6 any permit ip host x.1.2.7 any deny ip any any If the RP switch peering with PIM-SM switches is not configured with a policy to block registration messages for any undesirable multicast groups and sources, this is a finding.

Fix Text (F-22761r408966_fix)

Configure the switch to filter PIM register messages received from a multicast DR for any undesirable multicast groups and sources. The example below will deny any multicast streams for groups 239.5.0.0/16 and allow from only sources x.1.2.6 and x.1.2.7. SW2(config)#ip access-list extended PIM_REGISTER_FILTER SW2(config-ext-nacl)#deny ip any 239.5.0.0 0.0.255.255 SW2(config-ext-nacl)#permit ip host x.1.2.6 any SW2(config-ext-nacl)#permit ip host x.1.2.7 any SW2(config-ext-nacl)#deny ip any any SW2(config-ext-nacl)#exit SW2(config)#ip pim accept-register list PIM_REGISTER_FILTER SW2(config)#end