STIGViewer Support

The Cisco PE switch must be configured to ignore or drop all packets with any IP options.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-220473CISC-RT-000750SV-220473r945860_ruleCCI-002403medium
Description
Packets with IP options are not fast-switched and therefore must be punted to the switch processor. Hackers who initiate denial-of-service (DoS) attacks on switches commonly send large streams of packets with IP options. Dropping the packets with IP options reduces the load of IP options packets on the switch. The end result is a reduction in the effects of the DoS attack on the switch and on downstream switches.
STIGDate
Cisco IOS Switch RTR Security Technical Implementation Guide2026-03-04

Related Frameworks

1 mapping across 3 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

NET-03Boundary Protection
0.50
NET-04.1Deny Traffic by Default & Allow Traffic by Exception
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (8) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CM-6Configuration Settings
1.00
SC-24Fail in Known State
1.00
SC-47Alternate Communications Paths
1.00
SC-5Denial-of-service Protection
1.00
SC-7Boundary Protection
1.00
SC-7(11)Restrict Incoming Communications Traffic
1.00
SC-7(29)Separate Subnets to Isolate Functions
1.00
SC-7(5)Deny by Default — Allow by Exception
1.00
CCI1 mapping

Details

Check Text (C-220473r945860_chk)

Review the switch configuration to determine if it will ignore or drop all packets with IP options as shown in the examples below: ip options drop or ip options ignore If the switch is not configured to drop or block all packets with IP options, this is a finding.

Fix Text (F-22177r508493_fix)

Configure the switch to ignore or drop all packets with IP options as shown in the examples below: SW1(config)#ip options ignore or SW1(config)#ip options drop