OpenControls Logo

STIG Viewer

STIGViewer Support

The Cisco switch must not have any switchports assigned to the native VLAN.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-220647CISC-L2-000270SV-220647r991855_ruleCCI-004891low
Description
Double encapsulation can be initiated by an attacker who has access to a switch port belonging to the native VLAN of the trunk port. Knowing the victim’s MAC address and with the victim attached to a different switch belonging to the same trunk group, thereby requiring the trunk link and frame tagging, the malicious user can begin the attack by sending frames with two sets of tags. The outer tag that will have the attacker’s VLAN ID (probably the well-known and omnipresent default VLAN) is stripped off by the switch, and the inner tag that will have the victim’s VLAN ID is used by the switch as the next hop and sent out the trunk port.
STIGDate
Cisco IOS Switch L2S Security Technical Implementation Guide2024-06-06

Related Frameworks

1 mapping across 3 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CLD-03Cloud Infrastructure Security Subnet
0.50
NET-03.8Separate Subnet for Connecting to Different Security Domains
0.50
NET-06.1Security Management Subnets
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (8) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-17(2)Protection of Confidentiality and Integrity Using Encryption
1.00
AC-3Access Enforcement
1.00
CM-6Configuration Settings
1.00
SC-47Alternate Communications Paths
1.00
SC-7Boundary Protection
1.00
SC-7(11)Restrict Incoming Communications Traffic
1.00
SC-7(29)Separate Subnets to Isolate Functions
1.00
SC-8Transmission Confidentiality and Integrity
1.00
CCI1 mapping
CCI-004891
1.00

Details

Check Text (C-220647r991855_chk)

Review the switch configurations and examine all access switch ports. Verify that they do not belong to the native VLAN as shown in the example below: interface GigabitEthernet0/1 switchport trunk encapsulation dot1q switchport trunk native vlan 44 switchport mode trunk negotiation auto ! interface GigabitEthernet0/2 switchport access vlan 11 negotiation auto ! interface GigabitEthernet0/3 switchport access vlan 12 negotiation auto ! If any access switch ports have been assigned to the same VLAN ID as the native VLAN, this is a finding.

Fix Text (F-22351r507988_fix)

Configure all access switch ports to a VLAN other than the native VLAN.