STIGViewer Support

The Cisco ASA must be configured to generate an immediate real-time alert of all audit failure events requiring real-time alerts.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-239923CASA-ND-000930SV-239923r991812_ruleCCI-001858medium
Description
It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without a real-time alert, security personnel may be unaware of an impending failure of the audit capability and system operation may be adversely affected. Alerts provide organizations with urgent messages. Real-time alerts provide these messages immediately (i.e., the time from event detection to alert occurs in seconds or less).
STIGDate
Cisco ASA NDM Security Technical Implementation Guide2025-12-08

Related Frameworks

1 mapping across 3 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-05.1Real-Time Alerts of Event Logging Failure
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (22) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-2(4)Automated Audit Actions
1.00
AU-12Audit Record Generation
1.00
AU-14(1)System Start-up
1.00
AU-3Content of Audit Records
1.00
AU-3(1)Additional Audit Information
1.00
AU-4Audit Log Storage Capacity
1.00
AU-4(1)Transfer to Alternate Storage
1.00
AU-5Response to Audit Logging Process Failures
1.00
AU-5(1)Storage Capacity Warning
1.00
AU-5(2)Real-time Alerts
1.00

+12 more (top 10 by confidence shown)

CCI1 mapping

Details

Check Text (C-239923r991812_chk)

Review the Cisco ASA configuration to verify it is compliant with this requirement as shown in the example below. logging trap critical logging host NDM_INTERFACE 10.1.48.10 Note: The parameter critical can replaced with a lesser severity (i.e., error, warning, notice, informational). A logging list can be used as an alternative to the severity level. If the Cisco ASA is not configured to generate an alert for all audit failure events, this is a finding.

Fix Text (F-43115r666131_fix)

Configure the Cisco ASA to send critical to emergency log messages to the syslog server as shown in the example below. ASA(config)# logging host NDM_INTERFACE 10.1.48.10 ASA(config)# logging trap critical ASA(config)# end Note: The parameter critical can replaced with a lesser severity (i.e., error, warning, notice, informational).