OpenControls Logo

STIG Viewer

STIGViewer Support

The Cisco ASA must be configured to send log data to at least two central log servers for the purpose of forwarding alerts to organization-defined personnel and/or the firewall administrator.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-239943CASA-ND-001410SV-239943r1137890_ruleCCI-001851high
Description
The aggregation of log data kept on a syslog server can be used to detect attacks and trigger an alert to the appropriate security personnel. The stored log data can used to detect weaknesses in security that enable the network IA team to find and address these weaknesses before breaches can occur. Reviewing these logs, whether before or after a security breach, are important in showing whether someone is an internal employee or an outside threat. The ISSM or ISSO may designate the firewall/system administrator or other authorized personnel to receive the alert within the specified time, validate the alert, and then forward only validated alerts to the information system security manager (ISSM) and information system security officer (ISSO).
STIGDate
Cisco ASA NDM Security Technical Implementation Guide2026-05-01

Related Frameworks

1 mapping across 3 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-08.1Event Log Backup on Separate Physical Systems / Components
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (34) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-17(1)Monitoring and Control
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00
AC-6(9)Log Use of Privileged Functions
1.00
AU-10Non-repudiation
1.00
AU-12Audit Record Generation
1.00
AU-12(1)System-wide and Time-correlated Audit Trail
1.00
AU-12(3)Changes by Authorized Individuals
1.00
AU-14(1)System Start-up
1.00

+24 more (top 10 by confidence shown)

CCI1 mapping
CCI-001851
1.00

Details

Check Text (C-239943r1137890_chk)

Verify the ASA is configured to send logs to at least two syslog servers. The configuration should look similar to the example below. logging trap notifications logging host NDM_INTERFACE 10.1.48.10 6/1514 logging host NDM_INTERFACE 10.1.48.11 6/1514 Note: A logging list can be used as an alternative to the severity level. If the ASA is not configured to send log data to at least two syslog servers, this is a finding.

Fix Text (F-43135r916032_fix)

Configure the ASA to send log messages to the syslog servers as shown in the example below. ASA(config)# logging host NDM_INTERFACE 10.1.48.10 6/1514 ASA(config)# logging host NDM_INTERFACE 10.1.48.11 6/1514 ASA(config)# logging trap notifications ASA(config)# end