The Cisco ACI must not be configured to have any feature enabled that calls home to the vendor.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-272076	CACI-RT-000016	SV-272076r1113982_rule	CCI-002403	medium
Description
Call home services will routinely send data such as configuration and diagnostic information to the vendor for routine or emergency analysis and troubleshooting. There is a risk that transmission of sensitive data sent to unauthorized persons could result in data loss or downtime due to an attack.
STIG			Date
Cisco ACI Router Security Technical Implementation Guide			2025-06-18

Related Frameworks

1 mapping across 3 frameworks

SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

NET-03Boundary Protection

0.50

DISA STIG Benchmark (XCCDF)1intersects(normalised)
DISA CCI List2025-01-23equal to(normalised)
SCF Secure Traceability Relationship Mapping (STRM)2026.2intersects

NET-04.1Deny Traffic by Default & Allow Traffic by Exception

0.50

DISA STIG Benchmark (XCCDF)1intersects(normalised)
DISA CCI List2025-01-23equal to(normalised)
SCF Secure Traceability Relationship Mapping (STRM)2026.2intersects

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (8) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CM-6Configuration Settings

1.00

DISA STIG Benchmark (XCCDF)1intersects(normalised)
DISA STIG Benchmark (XCCDF)3our copyintersects(normalised)
DISA STIG Benchmark (XCCDF)3intersects(normalised)
DISA CCI List2025-01-23equal to(normalised)

SC-24Fail in Known State

1.00

DISA STIG Benchmark (XCCDF)1intersects(normalised)
DISA STIG Benchmark (XCCDF)V1R2our copyintersects(normalised)
DISA STIG Benchmark (XCCDF)V1R2intersects(normalised)
DISA CCI List2025-01-23equal to(normalised)

SC-47Alternate Communications Paths

1.00

DISA STIG Benchmark (XCCDF)1intersects(normalised)
DISA STIG Benchmark (XCCDF)V2R1our copyintersects(normalised)
DISA STIG Benchmark (XCCDF)V2R1intersects(normalised)
DISA CCI List2025-01-23equal to(normalised)

SC-5Denial-of-service Protection

1.00

DISA STIG Benchmark (XCCDF)1intersects(normalised)
DISA STIG Benchmark (XCCDF)V2R1our copyintersects(normalised)
DISA STIG Benchmark (XCCDF)V2R1intersects(normalised)
DISA CCI List2025-01-23equal to(normalised)

SC-7Boundary Protection

1.00

DISA STIG Benchmark (XCCDF)1intersects(normalised)
DISA STIG Benchmark (XCCDF)V1R2our copyintersects(normalised)
DISA STIG Benchmark (XCCDF)V1R2intersects(normalised)
DISA CCI List2025-01-23equal to(normalised)

SC-7(11)Restrict Incoming Communications Traffic

1.00

DISA STIG Benchmark (XCCDF)1intersects(normalised)
DISA CCI List2025-01-23equal to(normalised)

SC-7(29)Separate Subnets to Isolate Functions

1.00

DISA STIG Benchmark (XCCDF)1intersects(normalised)
DISA STIG Benchmark (XCCDF)V3R4our copyintersects(normalised)
DISA STIG Benchmark (XCCDF)V3R4intersects(normalised)
DISA CCI List2025-01-23equal to(normalised)

SC-7(5)Deny by Default — Allow by Exception

1.00

DISA STIG Benchmark (XCCDF)1intersects(normalised)
DISA STIG Benchmark (XCCDF)V1R2our copyintersects(normalised)
DISA STIG Benchmark (XCCDF)V1R2intersects(normalised)
DISA CCI List2025-01-23equal to(normalised)

CCI1 mapping

CCI-002403

1.00

DISA STIG Benchmark (XCCDF)1intersects(normalised)

Details

Check Text (C-272076r1113982_chk)

Verify the Call Home feature is disabled: 1. Navigate to the "Admin" section in the GUI, then expand All >> Communication Management >> Call Home. 2. In the General tab, verify the Admin State is set to "Off". If the Call Home feature is configured to send messages to unauthorized individuals such as Cisco TAC, this is a finding.

Fix Text (F-76033r1064193_fix)

Disable the Call Home feature: 1. Navigate to the "Admin" section in the GUI, then expand All >> Communication Management >> Call Home. 2. In the General tab, set the Admin State to "Off". 3. Click "Save".