STIGViewer Support

The Cisco ACI must be configured to have gratuitous ARP (GARP) disabled on all external interfaces.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-272086CACI-RT-000026SV-272086r1114094_ruleCCI-002385medium
Description
A GARP is an ARP broadcast in which the source and destination MAC addresses are the same. It is used to inform the network about a host IP address. A spoofed gratuitous ARP message can cause network mapping information to be stored incorrectly, causing network malfunction.
STIGDate
Cisco ACI Router Security Technical Implementation Guide2025-12-11

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (13) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-01Continuous Monitoring
1.00
MON-01.1Intrusion Detection & Prevention Systems (IDS & IPS)
1.00
MON-01.3Inbound & Outbound Communications Traffic
1.00
MON-01.4System Generated Alerts
1.00
MON-01.8Security Event Monitoring
1.00
NET-01Network Security Controls (NSC)
1.00
NET-02Layered Network Defenses
1.00
SEA-01Secure Engineering Principles
1.00
SEA-02Alignment With Enterprise Architecture
1.00
CAP-01Capacity & Performance Management
0.50

+3 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (36) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-10Concurrent Session Control
1.00
AC-17(9)Disconnect or Disable Access
1.00
AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00
AC-4Information Flow Enforcement
1.00
AC-6(9)Log Use of Privileged Functions
1.00
AU-12Audit Record Generation
1.00
AU-3Content of Audit Records
1.00
AU-5Response to Audit Logging Process Failures
1.00
CM-11(2)Software Installation with Privileged Status
1.00

+26 more (top 10 by confidence shown)

CCI1 mapping
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

Who does this work

12 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-272086r1114094_chk)

Review the configuration for each L3OUT Bridge Domain to determine if gratuitous ARP is disabled: 1. In the APIC GUI Navigation pane, select "Tenant" and inspect each Tenant's Bridge Domain configuration. 2. Expand "Networking" and right-click each Bridge Domain. 3. View the Layer 3 configuration tab. Verify GARP-based detection is not enabled. If GARP is enabled on any external interface, this is a finding.

Fix Text (F-76043r1114093_fix)

Disable GARP for each L3OUT Bridge Domain: 1. In the APIC GUI navigation pane, select "Tenant" and complete the following for each tenant listed. 2. Expand "Networking", right-click, "Create Bridge Domain" to open the dialog box, and fill out the form. - In the Layer 3 Configurations tab, GARP based detection must not be enabled. 3. Click "NEXT". 4. Complete the Bridge Domain configuration. 5. Click "Finish".