OpenControls Logo

STIG Viewer

STIGViewer Support

The Cisco ACI must be configured to log all packets that have been dropped.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-272075CACI-RT-000015SV-272075r1114309_ruleCCI-000134low
Description
Auditing and logging are key components of any security architecture. It is essential for security personnel to know what is being done or attempted to be done, and by whom, to compile an accurate risk assessment. Auditing the actions on network devices provides a means to recreate an attack or identify a configuration mistake on the device. To configure Cisco ACI to log all dropped packets, enable the "OpFlex Drop Log" feature, which allows logging of any packet dropped in the data path, essentially capturing all dropped packets due to policy mismatches or other reasons within the network fabric. This is done by setting the "log" directive within security policies when defining filter rules on contracts within the tenant.
STIGDate
Cisco ACI Router Security Technical Implementation Guide2025-12-11

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-01Continuous Monitoring
1.00
MON-01.4System Generated Alerts
1.00
MON-03Content of Event Logs
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (64) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-16Security and Privacy Attributes
1.00
AC-17(1)Monitoring and Control
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(10)Shared and Group Account Credential Change
1.00
AC-2(2)Automated Temporary and Emergency Account Management
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00
AC-3(3)Mandatory Access Control
1.00
AC-4Information Flow Enforcement
1.00

+54 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.3.1
1.00
3.3.2
1.00
CCI1 mapping
CCI-000134
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

PR.PS-04
1.00

Who does this work

6 NICE work roles and 5 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-272075r1114309_chk)

Use the APIC GUI to navigate to each tenant. Within each contract, review each rule with "Action" set to "Deny". Verify these rules have the "Directive" set to "Log". If packets being dropped at interfaces are not logged, this is a finding.

Fix Text (F-76032r1064190_fix)

Configure ACLs to log packets that are dropped. Use the APIC GUI to navigate to each tenant: 1. Go to the contract section and either create a new contract or modify an existing one where drop logging is to be implemented. 2. Within the contract, create the necessary filter rules based on the desired criteria (e.g., source/destination IP, port, protocol) and set the "Action" to "Deny" with the "Directive" set to "Log". 3. Assign the contract to the relevant endpoint groups (EPGs) to enforce the policy on traffic between them.