OpenControls Logo

STIG Viewer

STIGViewer Support

The Ubuntu operating system must immediately terminate all network connections associated with SSH traffic at the end of the session or after 10 minutes of inactivity.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-238213UBTU-20-010037SV-238213r970703_ruleCCI-001133medium
Description
Terminating an idle session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended. In addition, quickly terminating an idle session will also free up resources committed by the managed network element. Terminating network connections associated with communications sessions includes, for example, de-allocating associated TCP/IP address/port pairs at the operating system level, and de-allocating networking assignments at the application level if multiple application sessions are using a single operating system-level network connection. This does not mean that the operating system terminates all sessions or network access; it only ends the inactive session and releases the resources associated with that session.
STIGDate
Canonical Ubuntu 20.04 LTS Security Technical Implementation Guide2025-05-16

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

NET-07Network Connection Termination
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (24) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-11Device Lock
1.00
AC-11(1)Pattern-hiding Displays
1.00
AC-12Session Termination
1.00
AC-12(2)Termination Message
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(2)Automated Temporary and Emergency Account Management
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-7Unsuccessful Logon Attempts
1.00

+14 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.13.9
1.00
CCI1 mapping
CCI-001133
1.00

Details

Check Text (C-238213r970703_chk)

Verify all network connections associated with SSH traffic are automatically terminated at the end of the session or after 10 minutes of inactivity. Verify the "ClientAliveInterval" variable is set to a value of "600" or less by performing the following command: $ sudo /usr/sbin/sshd -dd 2>&1 | awk '/filename/ {print $4}' | tr -d '\r' | tr '\n' ' ' | xargs sudo grep -iH '^\s*clientaliveinterval' ClientAliveInterval 600 If "ClientAliveInterval" does not exist, is not set to a value of "600" or less in "/etc/ssh/sshd_config", or is commented out, this is a finding. If conflicting results are returned, this is a finding.

Fix Text (F-41382r653813_fix)

Configure the Ubuntu operating system to automatically terminate all network connections associated with SSH traffic at the end of a session or after a 10-minute period of inactivity. Modify or append the following line in the "/etc/ssh/sshd_config" file replacing "[Interval]" with a value of "600" or less: ClientAliveInterval 600 Restart the SSH daemon for the changes to take effect: $ sudo systemctl restart sshd.service