OpenControls Logo

STIG Viewer

STIGViewer Support

CylancePROTECT Mobile must be configured with the following compliance actions when insecure networks are detected for mobile devices: -Block device from network connection and insecure Wi-Fi access points. -Block access to BlackBerry Dynamics apps.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-257265BBCP-00-013100SV-257265r918379_ruleCCI-000366medium
Description
When a compliance failure is detected, compliance actions must be implemented immediately to limit exposure of sensitive data and unauthorized access to the mobile device.
STIGDate
BlackBerry CylancePROTECT Mobile for UEM Security Technical Implementation Guide2023-11-21

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (8) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-01Configuration Management Program
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
MON-01Continuous Monitoring
1.00
MON-01.7File Integrity Monitoring (FIM)
1.00
CFG-02Secure Baseline Configurations
0.50
CFG-02.7Approved Configuration Deviations
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (100) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-12Session Termination
1.00
AC-16(1)Dynamic Attribute Association
1.00
AC-17(1)Monitoring and Control
1.00
AC-2Account Management
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-24(1)Transmit Access Authorization Information
1.00
AC-25Reference Monitor
1.00

+90 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.4.1
1.00
3.4.2
1.00
CCI1 mapping
CCI-000366
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
PR.PS-01
1.00
PR.DS-10
0.50
PR.PSPlatform Security
0.50
PR.PS-05
0.50

Who does this work

10 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-257265r918379_chk)

Verify the following compliance actions are enabled when insecure networks are detected: -Block device from network connection and insecure Wi-Fi access points. -Block access to BlackBerry Dynamics apps. 1. Log on to the BlackBerry UEM console. 2. In the management console on the menu bar, click Policies and profiles >> Compliance >> Compliance. 3. Open the appropriate compliance profile (have the site system administrator identify the profile). 4. Verify required compliance actions for insecure network detection are enabled. a. On both the iOS and Android tabs, in the BlackBerry Protect section, verify "Insecure network detected" is selected. b. In the "Prompt for compliance" drop-down list, verify "Immediate enforcement action" is selected. c. In the "Enforcement action for device" drop-down list, verify "Untrust" is selected (Android only). d. In the "Enforcement action for BlackBerry Dynamics apps" drop-down list, verify "Do not allow BlackBerry Dynamics apps to run" is selected. 5. Verify compliance actions for insecure Wi-Fi access point detection are enabled (Android only). a. On the Android tab in the BlackBerry Protect section, verify "Insecure Wi-Fi network detected" is selected. b. In the "Prompt for compliance" drop-down list, verify "Immediate enforcement action" is selected. c. In the "Enforcement action for device" drop-down list, verify "Untrust" is selected. d. In the "Enforcement action for BlackBerry Dynamics apps" drop-down list, verify "Do not allow BlackBerry Dynamics apps to run" is selected. If any required compliance actions for insecure network detection for mobile devices has not been implemented, this is a finding.

Fix Text (F-60891r918378_fix)

Configure the following compliance actions when insecure networks are detected: -Block device from network connection and insecure Wi-Fi access points. -Block access to BlackBerry Dynamics apps. 1. Log on to the BlackBerry UEM console. 2. In the management console on the menu bar, click Policies and profiles >> Compliance >> Compliance. 3. Create a new compliance profile or select and edit an existing compliance profile. 4. Configure compliance actions for insecure network detection. a. On both the iOS and Android tabs, in the BlackBerry Protect section, select the "Insecure network detected" check box. b. Configure the behavior prompt settings: Prompt for compliance: "Immediate enforcement action". c. In the "Enforcement action for device" drop-down list, select the following: "Untrust" (Android only). d. In the "Enforcement action for BlackBerry Dynamics apps" drop-down list, select the following: "Do not allow BlackBerry Dynamics apps to run". 5. Configure compliance actions for insecure Wi-Fi access point detection (Android only). a. On the Android tab in the BlackBerry Protect section, select the "Insecure Wi-Fi network detected" check box. b. Configure the behavior prompt settings: Prompt for compliance: "Immediate enforcement action". c. In the "Enforcement action for device" drop-down list, select the following: "Untrust". d. In the "Enforcement action for BlackBerry Dynamics apps" drop-down list, select the following: "Do not allow BlackBerry Dynamics apps to run". 6. Click "Save". 7. Assign the profile to users.