OpenControls Logo

STIG Viewer

STIGViewer Support

The out-of-band management (OOBM) Arista gateway router must be configured to have separate IGP instances for the managed network and management network.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-256005ARST-RT-000190SV-256005r882357_ruleCCI-001414medium
Description
If the gateway router is not a dedicated device for the OOBM network, implementation of several safeguards for containment of management and production traffic boundaries must occur. Since the managed and management network are separate routing domains, configuration of separate Interior Gateway Protocol routing instances is critical on the router to segregate traffic from each network.
STIGDate
Arista MLS EOS 4.X Router Security Technical Implementation Guide2025-02-20

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (17) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AST-04Network Diagrams & Data Flow Diagrams (DFDs)
1.00
AST-04.2Control Applicability Boundary Graphical Representation
1.00
CFG-02Secure Baseline Configurations
1.00
CRY-01Use of Cryptographic Controls
1.00
DCH-01Data Protection
1.00
DCH-19Geographic Location of Data
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
IAC-21Least Privilege
1.00

+7 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (7) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-3Access Enforcement
1.00
AC-4Information Flow Enforcement
1.00
AC-6(9)Log Use of Privileged Functions
1.00
AU-12Audit Record Generation
1.00
CM-7Least Functionality
1.00
SC-5Denial-of-service Protection
1.00
SC-7(5)Deny by Default — Allow by Exception
1.00
NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.1.3
1.00
CCI1 mapping
CCI-001414
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (4) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
ID.AM-03
1.00
PR.DS-10
1.00
PR.IR-01
1.00

Who does this work

18 NICE work roles and 10 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-256005r882357_chk)

This requirement is not applicable for the DODIN backbone. Verify the OOBM interface is an adjacency in the Interior Gateway Protocol routing domain for the management network. Verify interface configuration that the OOBM management network subnet is configured. Step 1: To verify ospf process 100 interface is configured, execute the command "show run int YY". To verify vrf instance, execute "show vrf". Verify the OOBM vrf instance is configured. vrf instance OOBM ip routing vrf OOBM interface Vlan 2 description Connection to OOBM-LAN-Ethernet4 vrf OOBM mtu 9214 no routerport ip address 10.1.12.7/31 Step 2: To verify OSPF process is configured as OOBM management network, execute the command "show run section router ospf 100". router ospf 100 vrf OOBM network 10.1.12.0/24 area 0.0.0.0 Step 3: To verify OSPF process 200 is enabled on a private network without any connectivity with the OSPF process in management network, execute the command "show run int YY". Verify the LAN vrf instance is configured. vrf instance LAN ip routing vrf LAN interface Ethernet8 vrf LAN description Connection to Private-LAN-Ethernet4 mtu 9214 no routerport ip address 172.16.35.135/31 Step 4: To verify OSPF process 200 is configured as Private-LAN network, execute the command "show run section router ospf 200". router ospf 200 vrf LAN network 172.16.35.0/24 area 0.0.0.0 If the router does not enforce that Interior Gateway Protocol instances configured on the OOBM gateway router peer only with their own routing domain, this is a finding.

Fix Text (F-59624r882356_fix)

This requirement is not applicable for the DODIN backbone. Configure the Arista router to enforce that Interior Gateway Protocol instances configured on the OOBM gateway router peer only with their own routing domain. Configuring OSPF: Step 1: Configure the interface and OOBM vrf instance. vrf instance OOBM ip routing vrf OOBM LEAF-1A(config)#interface Vlan 2 LEAF-1A(config-if-Vl2)#description Connection to OOBM-LAN-Ethernet4 LEAF-1A(config-if-Vl2)#vrf OOBM LEAF-1A(config-if-Vl2)#mtu 9214 LEAF-1A(config-if-Vl2)#no routerport LEAF-1A(config-if-Vl2)#ip address 10.1.12.7/31 Step 2: Advertise the subnet in OSPF process 100. LEAF-1A(config-router-rip)#router ospf 100 vrf OOBM LEAF-1A(config-router-ospf)#network 10.1.12.0/24 area 0.0.0.0 Step 3: Configure the interface and LAN vrf instance. vrf instance LAN ip routing vrf LAN LEAF-1A(config)#interface Ethernet8 LEAF-1A(config-if-Et8)#description Connection to Private-LAN-Ethernet4 LEAF-1A(config-if-Et8)#vrf LAN LEAF-1A(config-if-Et8)#mtu 9214 LEAF-1A(config-if-Et8)#no routerport LEAF-1A(config-if-Et8)#ip address 172.16.35.135/31 Step 4: Advertise the subnet in OSPF process 200. LEAF-1A(config-router-ospf)#router ospf 200 vrf LAN LEAF-1A(config-router-rip)#network 172.16.35.0/24 area 0.0.0.0