STIGViewer Support

The Apple iOS must be configured to disable automatic transfer of diagnostic data to an external device other than an MDM service with which the device has enrolled.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-268057AIOS-18-013400SV-268057r1031237_ruleCCI-001199low
Description
Many software systems automatically send diagnostic data to the manufacturer or a third-party. This data enables the developers to understand real-world field behavior and improve the product based on that information. Unfortunately, it can also reveal information about what DOD users are doing with the systems and what causes them to fail. An adversary embedded within the software development team or elsewhere could use the information acquired to breach mobile operating system security. Disabling automatic transfer of such information mitigates this risk. SFRID: FMT_SMF.1.1 #47a
STIGDate
Apple iOS/iPadOS 18 Security Technical Implementation Guide2026-05-13

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CRY-01Use of Cryptographic Controls
1.00
CRY-01.1Alternate Physical Protection
1.00
CRY-05Encrypting Data At Rest
1.00
DCH-01Data Protection
1.00
END-02Endpoint Protection Measures
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (40) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-17(2)Protection of Confidentiality and Integrity Using Encryption
1.00
AC-2(3)Disable Accounts
1.00
AC-2(8)Dynamic Account Management
1.00
AC-3Access Enforcement
1.00
AC-3(7)Role-based Access Control
1.00
AC-4Information Flow Enforcement
1.00
AC-6(10)Prohibit Non-privileged Users from Executing Privileged Functions
1.00
AU-10Non-repudiation
1.00
AU-4(1)Transfer to Alternate Storage
1.00
AU-5Response to Audit Logging Process Failures
1.00

+30 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CCI1 mapping
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

Who does this work

7 NICE work roles and 7 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-268057r1031237_chk)

Review configuration settings to confirm "Allow sending diagnostic and usage data to Apple" is disabled. This check procedure is performed on both the iOS management tool and the iOS device. Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review. In the iOS management tool, verify "Allow sending diagnostic and usage data to Apple" is unchecked. Alternatively, verify the text "<key>allowDiagnosticSubmission</key><false/>" appears in the configuration profile (.mobileconfig file). On the Apple iOS device: 1. Open the Settings app. 2. Tap "General". 3. Tap "VPN & Device Management". 4. Tap the Configuration Profile from the iOS management tool containing the management policy. 5. Tap "Restrictions". 6. Verify "Diagnostic submission not allowed". Note: This setting also disables "Share With App Developers". If "Allow sending diagnostic and usage data to Apple" is checked in the iOS management tool, "<key>allowDiagnosticSubmission</key><true/>" appears in the configuration profile, or the restrictions policy on the Apple iOS device from the Apple iOS management tool does not list "Diagnostic submission not allowed", this is a finding.

Fix Text (F-71884r1030923_fix)

Install a configuration profile to disable sending diagnostic data to an organization other than DOD.