OpenControls Logo

STIG Viewer

STIGViewer Support

Kona Site Defender providing content filtering must protect against known types of denial-of-service (DoS) attacks by employing signatures.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-76423AKSD-WF-000020SV-91119r1_ruleCCI-002385medium
Description
If the network does not provide safeguards against DoS attacks, network resources may not be available to users during an attack. Installation of content filtering gateways and application layer firewalls at key boundaries in the architecture mitigates the risk of DoS attacks. These attacks can be detected by matching observed communications traffic with patterns of known attacks and monitoring for anomalies in traffic volume, type, or protocol usage. Detection components that use signatures can detect known attacks by using known attack signatures. Signatures are usually obtained from and updated by the ALG component vendor. This requirement applies to the communications traffic functionality of the ALG as it pertains to handling communications traffic, rather than to the ALG device itself.
STIGDate
Akamai KSD Service Impact Level 2 ALG Security Technical Implementation Guide2017-09-15

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (13) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-01Continuous Monitoring
1.00
MON-01.1Intrusion Detection & Prevention Systems (IDS & IPS)
1.00
MON-01.3Inbound & Outbound Communications Traffic
1.00
MON-01.4System Generated Alerts
1.00
MON-01.8Security Event Monitoring
1.00
NET-01Network Security Controls (NSC)
1.00
NET-02Layered Network Defenses
1.00
SEA-01Secure Engineering Principles
1.00
SEA-02Alignment With Enterprise Architecture
1.00
CAP-01Capacity & Performance Management
0.50

+3 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (36) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-10Concurrent Session Control
1.00
AC-17(9)Disconnect or Disable Access
1.00
AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00
AC-4Information Flow Enforcement
1.00
AC-6(9)Log Use of Privileged Functions
1.00
AU-12Audit Record Generation
1.00
AU-3Content of Audit Records
1.00
AU-5Response to Audit Logging Process Failures
1.00
CM-11(2)Software Installation with Privileged Status
1.00

+26 more (top 10 by confidence shown)

CCI1 mapping
CCI-002385
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-01
1.00
PR.IR-01
1.00
PR.IR-04
0.50

Who does this work

12 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-91119r1_chk)

Confirm Kona Site Defender is configured to block traffic for organizationally defined HTTP protocol violations, HTTP policy violations, SQL injection, remote file inclusion, cross-site scripting, command injection attacks, and any applicable custom rules: 1. Log in to the Akamai Luna Portal (https://control.akamai.com). 2. Click the "Configure" tab. 3. Under the "Security" section, select "Security Configuration". 4. If prompted for which product to use, select "Site Defender" and then "Continue". 5. Under the "Security Configurations" section, click on the most recent version under the "Production" column for the security configuration being reviewed. 6. The detailed "Security Configuration" page will load listing the protected host names and applicable policies. 7. Select the policy being reviewed. 8. Verify the "Application Layer Controls" checkbox is enabled. 9. Verify the following "KRS Rule Set" rules are set to "Deny". - SQL Injection - Cross Site Scripting (XSS) - Command Injection - Invalid HTTP - Remote File Inclusion - PHP Injection (when PHP is used) - Trojan - Total Request Scor4e (Inbound) - Total Response Score (Outbound) - DDOS 10. Verify the "Enabled Slow POST Protection" section appears. If the application layer controls are not set to "Deny" mode or slow POST protection does not appear, this is a finding.

Fix Text (F-83101r1_fix)

Configure the Kona Site Defender to block traffic for organizationally defined HTTP protocol violations, HTTP policy violations, SQL injection, remote file inclusion, cross-site scripting, command injection attacks, and any applicable custom rules. The Akamai Professional Services team should be consulted to implement this Fix content due to the complexities involved. In most cases, this should be included in the SLA. 1. Log in to the Akamai Luna Portal (https://control.akamai.com). 2. Click the "Configure" tab. 3. Under the "Security" section, select "Security Configuration". 4. If prompted for which product to use, select "Site Defender" and then "Continue". 5. Under the "Security Configurations" section, click on the most recent version under the "Production" column for the security configuration being reviewed. 6. The detailed "Security Configuration" page will load listing the protected host names and applicable policies. 7. Select the policy being reviewed and click the "Edit" button. 8. Enable the "Application Layer Controls" box and the "Slow POST Protection" box. 9. Click the "Next" button and set each of the following "KRS Rule Set" rules to "Deny". - SQL Injection - Cross Site Scripting (XSS) - Command Injection - Invalid HTTP - Remote File Inclusion - PHP Injection (when PHP is used) - Trojan - Total Request Score (Inbound) - Total Response Score (Outbound) - DDOS 10. Click the "Next" button and follow the prompts to complete the process.