OpenControls Logo

STIG Viewer

STIGViewer Support

Kona Site Defender must immediately apply updates to the Kona Rule Set to block designated traffic of interest in response to new or emerging threats.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-76393AKSD-WF-000002SV-91089r1_ruleCCI-001414high
Description
Information flow policies regarding dynamic information flow control include, for example, allowing or disallowing information flows based on changes to the PPSM CAL, vulnerability assessments, or mission conditions. Changing conditions include changes in the threat environment and detection of potentially harmful or adverse events. Changes to the ALG must take effect when made by an authorized administrator and the new configuration is put in place or committed, including upon restart of the application or reboot of the system. With some devices, the changes take effect as the configuration is changed, while with others, the new configuration must be submitted to the device. In any case, the behavior of the ALG must immediately be affected to reflect the configuration change.
STIGDate
Akamai KSD Service Impact Level 2 ALG Security Technical Implementation Guide2017-09-15

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (17) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AST-04Network Diagrams & Data Flow Diagrams (DFDs)
1.00
AST-04.2Control Applicability Boundary Graphical Representation
1.00
CFG-02Secure Baseline Configurations
1.00
CRY-01Use of Cryptographic Controls
1.00
DCH-01Data Protection
1.00
DCH-19Geographic Location of Data
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
IAC-21Least Privilege
1.00

+7 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (7) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-3Access Enforcement
1.00
AC-4Information Flow Enforcement
1.00
AC-6(9)Log Use of Privileged Functions
1.00
AU-12Audit Record Generation
1.00
CM-7Least Functionality
1.00
SC-5Denial-of-service Protection
1.00
SC-7(5)Deny by Default — Allow by Exception
1.00
NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.1.3
1.00
CCI1 mapping
CCI-001414
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (4) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
ID.AM-03
1.00
PR.DS-10
1.00
PR.IR-01
1.00

Who does this work

18 NICE work roles and 10 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-91089r1_chk)

Confirm Kona Site Defender is configured to block traffic for organizationally defined HTTP protocol violations, HTTP policy violations, SQL injection, remote file inclusion, cross-site scripting, command injection attacks, and any applicable custom rules: 1. Log in to the Akamai Luna Portal (https://control.akamai.com). 2. Click the "Configure" tab. 3. Under the "Security" section, select "Security Configuration". 4. If prompted for which product to use, select "Site Defender" and then "Continue". 5. Under the "Security Configurations" section, click on the most recent version under the "Production" column for the security configuration being reviewed. 6. The detailed "Security Configuration" page will load listing the protected host names and applicable policies. 7. Select the policy being reviewed. 8. Verify the "Application Layer Controls" checkbox is enabled. 9. Verify the following "KRS Rule Set" rules are set to "Deny". - SQL Injection - Cross Site Scripting (XSS) - Command Injection - Invalid HTTP - Remote File Inclusion - PHP Injection (when PHP is used) - Trojan - Total Request Scor4e (Inbound) - Total Response Score (Outbound) - DDOS 10. Verify the "Enabled Slow POST Protection" section appears. If the application layer controls are not set to "Deny" mode or slow POST protection does not appear, this is a finding.

Fix Text (F-83069r1_fix)

Configure the Kona Site Defender to block traffic for organizationally defined HTTP protocol violations, HTTP policy violations, SQL injection, remote file inclusion, cross-site scripting, command injection attacks, and any applicable custom rules. The Akamai Professional Services team should be consulted to implement this Fix content due to the complexities involved. In most cases, this should be included in the SLA. 1. Log in to the Akamai Luna Portal (https://control.akamai.com). 2. Click the "Configure" tab. 3. Under the "Security" section, select "Security Configuration". 4. If prompted for which product to use, select "Site Defender" and then "Continue". 5. Under the "Security Configurations" section, click on the most recent version under the "Production" column for the security configuration being reviewed. 6. The detailed "Security Configuration" page will load listing the protected host names and applicable policies. 7. Select the policy being reviewed and click the "Edit" button. 8. Enable the "Application Layer Controls" box and the "Slow POST Protection" box. 9. Click the "Next" button and set each of the following "KRS Rule Set" rules to "Deny". - SQL Injection - Cross Site Scripting (XSS) - Command Injection - Invalid HTTP - Remote File Inclusion - PHP Injection (when PHP is used) - Trojan - Total Request Score (Inbound) - Total Response Score (Outbound) - DDOS 10. Click the "Next" button and follow the prompts to complete the process.