Zebra Android 11 must allow only the Administrator (EMM) to perform the following management function: Enable/disable location services.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-252867	ZEBR-11-005200	SV-252867r820528_rule		Low

Description
If a user is able to configure the security setting, the user could inadvertently or maliciously set it to a value that poses unacceptable risk to DoD information systems. An adversary could exploit vulnerabilities created by the weaker configuration to compromise DoD sensitive information. SFR ID: FMT_MOF_EXT.1.2 #22

STIG	Date
Zebra Android 11 COBO Security Technical Implementation Guide	2023-08-28

Details

Check Text ( C-56323r820526_chk )
Review Zebra Android device configuration settings to determine if the mobile device has location services on/off. This validation procedure is performed on both the EMM Administration Console and the Android 11 device. On the EMM console, do the following: 1. Open "Set user restrictions on parent". 2. Verify that "Disallow config location" is toggled to "On". 3. Verify that "Disallow share location" is toggled to "On". On the Zebra device, do the following: 1. Open Settings >> Location. 2. Validate that Location Services is "off" for Work. If the mobile device has location services enabled, this is a finding.

Check Text ( C-56323r820526_chk )

Review Zebra Android device configuration settings to determine if the mobile device has location services on/off.

This validation procedure is performed on both the EMM Administration Console and the Android 11 device.

On the EMM console, do the following:
1. Open "Set user restrictions on parent".
2. Verify that "Disallow config location" is toggled to "On".
3. Verify that "Disallow share location" is toggled to "On".

On the Zebra device, do the following:
1. Open Settings >> Location.
2. Validate that Location Services is "off" for Work.

If the mobile device has location services enabled, this is a finding.

Fix Text (F-56273r820527_fix)
Configure the Zebra Android 11 device to enable/disable location services. On the EMM console: 1. Open "Set user restrictions on parent". 2. Toggle "Disallow config location" to "On". 3. Toggle "Disallow share location" to "On".