The Server Message Block (SMB) v1 protocol must be disabled on the SMB server.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-74723	WN10-00-000165	SV-89397r1_rule		Medium

Description
SMBv1 is a legacy protocol that uses the MD5 algorithm as part of SMB. MD5 is known to be vulnerable to a number of attacks such as collision and preimage attacks as well as not being FIPS compliant. Disabling SMBv1 support may prevent access to file or print sharing resources with systems or devices that only support SMBv1. File shares and print services hosted on Windows Server 2003 are an example, however Windows Server 2003 is no longer a supported operating system. Some older network attached devices may only support SMBv1.

Description

SMBv1 is a legacy protocol that uses the MD5 algorithm as part of SMB. MD5 is known to be vulnerable to a number of attacks such as collision and preimage attacks as well as not being FIPS compliant. Disabling SMBv1 support may prevent access to file or print sharing resources with systems or devices that only support SMBv1. File shares and print services hosted on Windows Server 2003 are an example, however Windows Server 2003 is no longer a supported operating system. Some older network attached devices may only support SMBv1.

STIG	Date
Windows 10 Security Technical Implementation Guide	2018-04-06

Details

Check Text ( C-74577r1_chk )
Different methods are available to disable SMBv1 on Windows 10, if V-70639 is configured, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\ Value Name: SMB1 Type: REG_DWORD Value: 0x00000000 (0)

Fix Text (F-81337r2_fix)
Configure the policy value for Computer Configuration >> Administrative Templates >> MS Security Guide >> "Configure SMBv1 Server" to "Disabled". This policy setting requires the installation of the SecGuide custom templates included with the STIG package. "SecGuide.admx" and "SecGuide.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively. The system must be restarted for the change to take effect.

Fix Text (F-81337r2_fix)

Configure the policy value for Computer Configuration >> Administrative Templates >> MS Security Guide >> "Configure SMBv1 Server" to "Disabled".

This policy setting requires the installation of the SecGuide custom templates included with the STIG package. "SecGuide.admx" and "SecGuide.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.

The system must be restarted for the change to take effect.