{
"stig": {
"date": "2014-11-17",
"description": "The Web Server SRG is published as a tool to improve the security of Department of Defense (DoD) information systems. The requirements are derived from the NIST 800-53 and related documents. Comments or proposed revisions to this document should be sent via e-mail to the following address: disa.letterkenny.FSO.mbx.stig-customer-support-mailbox@mail.mil.",
"findings": {
"V-40791": {
"checkid": "C-47298r3_chk",
"checktext": "Review the web server documentation and configuration to determine if the number of simultaneous sessions is limited.\n\nIf the parameter is not configured or is unlimited, this is a finding.",
"description": "Web server management includes the ability to control the number of users and user sessions that utilize a web server. Limiting the number of allowed users and sessions per user is helpful in limiting risks related to several types of Denial of Service attacks. \n\nAlthough there is some latitude concerning the settings themselves, the settings should follow DoD-recommended values, but the settings should be configurable to allow for future DoD direction. While the DoD will specify recommended values, the values can be adjusted to accommodate the operational requirement of a given system.",
"fixid": "F-45918r3_fix",
"fixtext": "Configure the web server to limit the number of concurrent sessions.",
"iacontrols": null,
"id": "V-40791",
"ruleID": "SV-53018r2_rule",
"severity": "medium",
"title": "The web server must limit the number of allowed simultaneous session requests.",
"version": "SRG-APP-000001-WSR-000001"
},
"V-40792": {
"checkid": "C-47329r3_chk",
"checktext": "Review the web server documentation and configuration to determine if server-side session management is configured.\n\nIf it is not configured, this is a finding.",
"description": "Session management is the practice of protecting the bulk of the user authorization and identity information. Storing of this data can occur on the client system or on the server. \n\nWhen the session information is stored on the client, the session ID, along with the user authorization and identity information, is sent along with each client request and is stored in either a cookie, embedded in the uniform resource locator (URL), or placed in a hidden field on the displayed form. Each of these offers advantages and disadvantages. The biggest disadvantage to all three is the hijacking of a session along with all of the user's credentials.\n\nWhen the user authorization and identity information is stored on the server in a protected and encrypted database, the communication between the client and web server will only send the session identifier, and the server can then retrieve user credentials for the session when needed. If, during transmission, the session were to be hijacked, the user's credentials would not be compromised.",
"fixid": "F-45949r2_fix",
"fixtext": "Configure the web server to perform server-side session management.",
"iacontrols": null,
"id": "V-40792",
"ruleID": "SV-53023r2_rule",
"severity": "medium",
"title": "The web server must perform server-side session management.",
"version": "SRG-APP-000001-WSR-000002"
},
"V-40799": {
"checkid": "C-47342r2_chk",
"checktext": "Review the web server documentation and configuration to determine if the web server is configured to generate information for external applications monitoring remote access.\n\nIf a mechanism is not in place providing information to an external application used to monitor and control access, this is a finding.",
"description": "Remote access to the web server is any access that communicates through an external, non-organization-controlled network. Remote access can be used to access hosted applications or to perform management functions. \n\nBy providing remote access information to an external monitoring system, the organization can monitor for cyber attacks and monitor compliance with remote access policies. The organization can also look at data organization wide and determine an attack or anomaly is occurring on the organization which might not be noticed if the data were kept local to the web server.\n\nExamples of external applications used to monitor or control access would be audit log monitoring systems, dynamic firewalls, or infrastructure monitoring systems.",
"fixid": "F-45961r2_fix",
"fixtext": "Configure the web server to provide remote connection information to external monitoring and access control applications.",
"iacontrols": null,
"id": "V-40799",
"ruleID": "SV-53035r2_rule",
"severity": "medium",
"title": "The web server must generate information to be used by external applications or entities to monitor and control remote access.",
"version": "SRG-APP-000016-WSR-000005"
},
"V-40800": {
"checkid": "C-47343r2_chk",
"checktext": "Review the web server documentation and configuration to determine the communication methods that are being used.\n\nVerify the encryption being used is in accordance with the categorization of data being hosted when remote connections are provided.\n\nIf it is not, then this is a finding.",
"description": "The web server has several remote communications channels. Examples are user requests via http/https, communication to a backend database, or communication to authenticate users. The encryption used to communicate must match the data that is being retrieved or presented.\n\nMethods of communication are http for publicly displayed information, https to encrypt when user data is being transmitted, VPN tunneling, or other encryption methods to a database.",
"fixid": "F-45963r2_fix",
"fixtext": "Configure the web server to use encryption strength equal to the categorization of data hosted when remote connections are provided.",
"iacontrols": null,
"id": "V-40800",
"ruleID": "SV-53037r2_rule",
"severity": "medium",
"title": "The web server must use encryption strength in accordance with the categorization of data hosted by the web server when remote connections are provided.",
"version": "SRG-APP-000014-WSR-000006"
},
"V-40819": {
"checkid": "C-47375r2_chk",
"checktext": "Review the web server documentation and configuration to make certain that the web server is configured to use cryptography to protect the integrity of remote access sessions.\n\nIf the web server is not configured to use cryptography to protect the integrity of remote access sessions, this is a finding.",
"description": "Data exchanged between the user and the web server can range from static display data to credentials used to log into the hosted application. Even when data appears to be static, the non-displayed logic in a web page may expose business logic or trusted system relationships. The integrity of all the data being exchanged between the user and web server must always be trusted. To protect the integrity and trust, encryption methods should be used to protect the complete communication session.",
"fixid": "F-45994r2_fix",
"fixtext": "Configure the web server to utilize encryption during remote access sessions.",
"iacontrols": null,
"id": "V-40819",
"ruleID": "SV-53068r2_rule",
"severity": "medium",
"title": "The web server must use cryptography to protect the integrity of remote sessions.",
"version": "SRG-APP-000015-WSR-000014"
},
"V-41600": {
"checkid": "C-48029r2_chk",
"checktext": "Review the web server documentation and the deployed system configuration to determine if, at a minimum, system startup and shutdown, system access, and system authentication events are logged.\n\nIf the logs do not include the minimum logable events, this is a finding.",
"description": "Log records can be generated from various components within the web server (e.g., httpd, plug-ins to external backends, etc.). From a web server perspective, certain specific web server functionalities may be logged as well. The web server must allow the definition of what events are to be logged. As conditions change, the number and types of events to be logged may change, and the web server must be able to facilitate these changes.\n\nThe minimum list of logged events should be those pertaining to system startup and shutdown, system access, and system authentication events. If these events are not logged at a minimum, any type of forensic investigation would be missing pertinent information needed to replay what occurred.",
"fixid": "F-47059r3_fix",
"fixtext": "Configure the web server to generate log records for system startup and shutdown, system access, and system authentication events.",
"iacontrols": null,
"id": "V-41600",
"ruleID": "SV-54177r2_rule",
"severity": "medium",
"title": "The web server must generate, at a minimum, log records for system startup and shutdown, system access, and system authentication events.",
"version": "SRG-APP-000089-WSR-000047"
},
"V-41609": {
"checkid": "C-48038r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine if the web server captures and logs all content related to a user session.\n\nRequest a user access the hosted applications and verify the complete session is logged.\n\nIf any of the session is excluded from the log, this is a finding.",
"description": "A user session to a web server is in the context of a user accessing a hosted application that extends to any plug-ins/modules and services that may execute on behalf of the user.\n\nThe web server must be capable of enabling a setting for troubleshooting, debugging, or forensic gathering purposes which will log all user session information related to the hosted application session. Without the capability to capture, record, and log all content related to a user session, investigations into suspicious user activity would be hampered.",
"fixid": "F-47068r2_fix",
"fixtext": "Configure the web server to capture and log all content related to a user session.",
"iacontrols": null,
"id": "V-41609",
"ruleID": "SV-54186r2_rule",
"severity": "medium",
"title": "The web server must capture, record, and log all content related to a user session.",
"version": "SRG-APP-000093-WSR-000053"
},
"V-41611": {
"checkid": "C-48040r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine if the web server captures log data as soon as the web server is started.\n\nIf the web server does not capture logable events upon startup, this is a finding.",
"description": "An attacker can compromise a web server during the startup process. If logging is not initiated until all the web server processes are started, key information may be missed and not available during a forensic investigation. To assure all logable events are captured, the web server must begin logging once the first web server process is initiated.",
"fixid": "F-47070r2_fix",
"fixtext": "Configure the web server to capture logable events upon startup.",
"iacontrols": null,
"id": "V-41611",
"ruleID": "SV-54188r2_rule",
"severity": "medium",
"title": "The web server must initiate session logging upon start up.",
"version": "SRG-APP-000092-WSR-000055"
},
"V-41612": {
"checkid": "C-48041r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine if the web server contains sufficient information to establish what type of event occurred.\n\nRequest a user access the hosted applications, and verify sufficient information is recorded.\n\nIf sufficient information is not logged, this is a finding.",
"description": "Web server logging capability is critical for accurate forensic analysis. Without sufficient and accurate information, a correct replay of the events cannot be determined. \n\nAscertaining the correct type of event that occurred is important during forensic analysis. The correct determination of the event and when it occurred is important in relation to other events that happened at that same time. \n\nWithout sufficient information establishing what type of log event occurred, investigation into the cause of event is severely hindered. Log record content that may be necessary to satisfy the requirement of this control includes, but is not limited to, time stamps, source and destination IP addresses, user/process identifiers, event descriptions, application-specific events, success/fail indications, file names involved, access control, or flow control rules invoked.",
"fixid": "F-47071r2_fix",
"fixtext": "Configure the web server to record sufficient information to establish what type of events occurred.",
"iacontrols": null,
"id": "V-41612",
"ruleID": "SV-54189r2_rule",
"severity": "medium",
"title": "The web server must produce log records containing sufficient information to establish what type of events occurred.",
"version": "SRG-APP-000095-WSR-000056"
},
"V-41613": {
"checkid": "C-48042r2_chk",
"checktext": "Review the web server documentation and deployment configuration to determine if the web server is configured to generate a date and time for each logged event.\n\nRequest a user access the hosted application and generate logable events, and then review the logs to determine if the date and time are included in the log event data.\n\nIf the date and time are not included, this is a finding.",
"description": "Web server logging capability is critical for accurate forensic analysis. Without sufficient and accurate information, a correct replay of the events cannot be determined. \n\nAscertaining the correct order of the events that occurred is important during forensic analysis. Events that appear harmless by themselves might be flagged as a potential threat when properly viewed in sequence. By also establishing the event date and time, an event can be properly viewed with an enterprise tool to fully see a possible threat in its entirety.\n\nWithout sufficient information establishing when the log event occurred, investigation into the cause of event is severely hindered. Log record content that may be necessary to satisfy the requirement of this control includes, but is not limited to, time stamps, source and destination IP addresses, user/process identifiers, event descriptions, application-specific events, success/fail indications, file names involved, access control, or flow control rules invoked.",
"fixid": "F-47072r2_fix",
"fixtext": "Configure the web server to log date and time with the event.",
"iacontrols": null,
"id": "V-41613",
"ruleID": "SV-54190r2_rule",
"severity": "medium",
"title": "The web server must produce log records containing sufficient information to establish when (date and time) events occurred.",
"version": "SRG-APP-000096-WSR-000057"
},
"V-41614": {
"checkid": "C-48043r2_chk",
"checktext": "Review the web server documentation and deployment configuration to determine if the web server is configured to generate sufficient information to resolve in which process within the web server the log event occurred.\n\nRequest a user access the hosted application and generate logable events, and then review the logs to determine if the process of the event within the web server can be established.\n\nIf it cannot be determined where the event occurred, this is a finding.",
"description": "Web server logging capability is critical for accurate forensic analysis. Without sufficient and accurate information, a correct replay of the events cannot be determined. \n\nAscertaining the correct location or process within the web server where the events occurred is important during forensic analysis. Correctly determining the web service, plug-in, or module will add information to the overall reconstruction of the logged event. For example, an event that occurred during communication to a cgi module might be handled differently than an event that occurred during a communication session to a user.\n\nWithout sufficient information establishing where the log event occurred within the web server, investigation into the cause of event is severely hindered. Log record content that may be necessary to satisfy the requirement of this control includes, but is not limited to, time stamps, source and destination IP addresses, user/process identifiers, event descriptions, application-specific events, success/fail indications, file names involved, access control, or flow control rules invoked.",
"fixid": "F-47073r2_fix",
"fixtext": "Configure the web server to generate enough information to determine in what process within the web server the log event occurred.",
"iacontrols": null,
"id": "V-41614",
"ruleID": "SV-54191r2_rule",
"severity": "medium",
"title": "The web server must produce log records containing sufficient information to establish where within the web server the events occurred.",
"version": "SRG-APP-000097-WSR-000058"
},
"V-41615": {
"checkid": "C-48044r2_chk",
"checktext": "Review the web server documentation and deployment configuration to determine if the web server is configured to generate sufficient information to resolve the source, e.g. source IP, of the log event.\n\nRequest a user access the hosted application and generate logable events, and then review the logs to determine if the source of the event can be established.\n\nIf the source of the event cannot be determined, this is a finding.",
"description": "Web server logging capability is critical for accurate forensic analysis. Without sufficient and accurate information, a correct replay of the events cannot be determined. \n\nAscertaining the correct source, e.g. source IP, of the events is important during forensic analysis. Correctly determining the source will add information to the overall reconstruction of the logable event. By determining the source of the event correctly, analysis of the enterprise can be undertaken to determine if the event compromised other assets within the enterprise.\n\nWithout sufficient information establishing the source of the logged event, investigation into the cause of event is severely hindered. Log record content that may be necessary to satisfy the requirement of this control includes, but is not limited to, time stamps, source and destination IP addresses, user/process identifiers, event descriptions, application-specific events, success/fail indications, file names involved, access control, or flow control rules invoked.",
"fixid": "F-47074r2_fix",
"fixtext": "Configure the web server to generate the source of each logable event.",
"iacontrols": null,
"id": "V-41615",
"ruleID": "SV-54192r2_rule",
"severity": "medium",
"title": "The web server must produce log records containing sufficient information to establish the source of events.",
"version": "SRG-APP-000098-WSR-000059"
},
"V-41616": {
"checkid": "C-48045r2_chk",
"checktext": "Review the deployment configuration to determine if the web server is sitting behind a proxy server. If the web server is not sitting behind a proxy server, this finding is NA.\n\nIf the web server is behind a proxy server, review the documentation and deployment configuration to determine if the web server is configured to generate sufficient information to resolve the source, e.g. source IP, of the logged event and not the proxy server.\n\nRequest a user access the hosted application through the proxy server and generate logable events, and then review the logs to determine if the source of the event can be established.\n\nIf the source of the event cannot be determined, this is a finding.",
"description": "Web server logging capability is critical for accurate forensic analysis. Without sufficient and accurate information, a correct replay of the events cannot be determined. \n\nAscertaining the correct source, e.g. source IP, of the events is important during forensic analysis. Correctly determining the source of events will add information to the overall reconstruction of the logable event. By determining the source of the event correctly, analysis of the enterprise can be undertaken to determine if events tied to the source occurred in other areas within the enterprise.\n\nA web server behind a load balancer or proxy server, when not configured correctly, will record the load balancer or proxy server as the source of every logable event. When looking at the information forensically, this information is not helpful in the investigation of events. The web server must record with each event the client source of the event.",
"fixid": "F-47075r2_fix",
"fixtext": "Configure the web server to generate the client source, not the load balancer or proxy server, of each logable event.",
"iacontrols": null,
"id": "V-41616",
"ruleID": "SV-54193r2_rule",
"severity": "medium",
"title": "A web server, behind a load balancer or proxy server, must produce log records containing the client IP information as the source and destination and not the load balancer or proxy IP information with each event.",
"version": "SRG-APP-000098-WSR-000060"
},
"V-41617": {
"checkid": "C-48046r2_chk",
"checktext": "Review the web server documentation and deployment configuration to determine if the web server is configured to generate the outcome (success or failure) of the event.\n\nRequest a user access the hosted application and generate logable events, and then review the logs to determine if the outcome of the event can be established.\n\nIf the outcome of the event cannot be determined, this is a finding.",
"description": "Web server logging capability is critical for accurate forensic analysis. Without sufficient and accurate information, a correct replay of the events cannot be determined. \n\nAscertaining the success or failure of an event is important during forensic analysis. Correctly determining the outcome will add information to the overall reconstruction of the logable event. By determining the success or failure of the event correctly, analysis of the enterprise can be undertaken to determine if events tied to the event occurred in other areas within the enterprise.\n\nWithout sufficient information establishing the success or failure of the logged event, investigation into the cause of event is severely hindered. The success or failure also provides a means to measure the impact of an event and help authorized personnel to determine the appropriate response. Log record content that may be necessary to satisfy the requirement of this control includes, but is not limited to, time stamps, source and destination IP addresses, user/process identifiers, event descriptions, application-specific events, success/fail indications, file names involved, access control, or flow control rules invoked.",
"fixid": "F-47076r2_fix",
"fixtext": "Configure the web server to generate the outcome, success or failure, as part of each logable event.",
"iacontrols": null,
"id": "V-41617",
"ruleID": "SV-54194r2_rule",
"severity": "medium",
"title": "The web server must produce log records that contain sufficient information to establish the outcome (success or failure) of events.",
"version": "SRG-APP-000099-WSR-000061"
},
"V-41620": {
"checkid": "C-48049r2_chk",
"checktext": "Review the web server documentation and deployment configuration to determine if the web server can generate log data containing the user/subject identity.\n\nRequest a user access the hosted application and generate logable events, and verify the events contain the user/subject or process identity.\n\nIf the identity is not part of the log record, this is a finding.",
"description": "Web server logging capability is critical for accurate forensic analysis. Without sufficient and accurate information, a correct replay of the events cannot be determined.\n\nDetermining user accounts, processes running on behalf of the user, and running process identifiers also enable a better understanding of the overall event. User tool identification is also helpful to determine if events are related to overall user access or specific client tools.\n\nLog record content that may be necessary to satisfy the requirement of this control includes: time stamps, source and destination addresses, user/process identifiers, event descriptions, success/fail indications, file names involved, and access control or flow control rules invoked.",
"fixid": "F-47079r2_fix",
"fixtext": "Configure the web server to include the user/subject identity or process as part of each log record.",
"iacontrols": null,
"id": "V-41620",
"ruleID": "SV-54197r2_rule",
"severity": "medium",
"title": "The web server must produce log records containing sufficient information to establish the identity of any user/subject or process associated with an event.",
"version": "SRG-APP-000100-WSR-000064"
},
"V-41668": {
"checkid": "C-48065r2_chk",
"checktext": "Review the web server documentation and deployment configuration to determine if the internal system clock is used for date and time stamps. If this is not feasible, an alternative workaround is to take an action that generates an entry in the log and then immediately query the operating system for the current time. A reasonable match between the two times will suffice as evidence that the system is using the internal clock for date and time stamps.\n\nIf the web server does not use the internal system clock to generate time stamps, this is a finding.",
"description": "Without an internal clock used as the reference for the time stored on each event to provide a trusted common reference for the time, forensic analysis would be impeded. Determining the correct time a particular event occurred on the web server is critical when conducting forensic analysis and investigating system events. \n\nIf the internal clock is not used, the web server may not be able to provide time stamps for log messages. The web server can use the capability of an operating system or purpose-built module for this purpose.\n\nTime stamps generated by the web server shall include both date and time. The time may be expressed in Coordinated Universal Time (UTC), a modern continuation of Greenwich Mean Time (GMT), or local time with an offset from UTC.",
"fixid": "F-47127r2_fix",
"fixtext": "Configure the web server to use internal system clocks to generate date and time stamps for log records.",
"iacontrols": null,
"id": "V-41668",
"ruleID": "SV-54245r2_rule",
"severity": "medium",
"title": "The web server must use the internal system clock to generate time stamps for log records.",
"version": "SRG-APP-000116-WSR-000066"
},
"V-41670": {
"checkid": "C-48067r2_chk",
"checktext": "Review the web server documentation and deployed configuration settings to determine if the web server logging features protect log information from unauthorized access.\n\nReview file system settings to verify the log files have secure file permissions.\n\nIf the web server log files are not protected from unauthorized access, this is a finding.",
"description": "Log data is essential in the investigation of events. If log data were to become compromised, then competent forensic analysis and discovery of the true source of potentially malicious system activity would be difficult, if not impossible, to achieve. In addition, access to log records provides information an attacker could potentially use to their advantage since each event record might contain communication ports, protocols, services, trust relationships, user names, etc.\n\nThe web server must protect the log data from unauthorized read, write, copy, etc. This can be done by the web server if the web server is also doing the logging function. The web server may also use an external log system. In either case, the logs must be protected from access by non-privileged users.",
"fixid": "F-47129r2_fix",
"fixtext": "Configure the web server log files so unauthorized access of log information is not possible.",
"iacontrols": null,
"id": "V-41670",
"ruleID": "SV-54247r2_rule",
"severity": "medium",
"title": "Web server log files must only be accessible by privileged users.",
"version": "SRG-APP-000118-WSR-000068"
},
"V-41671": {
"checkid": "C-48068r2_chk",
"checktext": "Review the web server documentation and deployed configuration settings to determine if the web server logging features protect log information from unauthorized modification.\n\nReview file system settings to verify the log files have secure file permissions.\n\nIf the web server log files are not protected from unauthorized modification, this is a finding.",
"description": "Log data is essential in the investigation of events. The accuracy of the information is always pertinent. Information that is not accurate does not help in the revealing of potential security risks and may hinder the early discovery of a system compromise. One of the first steps an attacker will undertake is the modification or deletion of log records to cover his tracks and prolong discovery.\n\nThe web server must protect the log data from unauthorized modification. This can be done by the web server if the web server is also doing the logging function. The web server may also use an external log system. In either case, the logs must be protected from modification by non-privileged users.",
"fixid": "F-47130r3_fix",
"fixtext": "Configure the web server log files so unauthorized modification of log information is not possible.",
"iacontrols": null,
"id": "V-41671",
"ruleID": "SV-54248r2_rule",
"severity": "medium",
"title": "The log information from the web server must be protected from unauthorized modification.",
"version": "SRG-APP-000119-WSR-000069"
},
"V-41672": {
"checkid": "C-48069r2_chk",
"checktext": "Review the web server documentation and deployed configuration settings to determine if the web server logging features protect log information from unauthorized deletion.\n\nReview file system settings to verify the log files have secure file permissions.\n\nIf the web server log files are not protected from unauthorized deletion, this is a finding.",
"description": "Log data is essential in the investigation of events. The accuracy of the information is always pertinent. Information that is not accurate does not help in the revealing of potential security risks and may hinder the early discovery of a system compromise. One of the first steps an attacker will undertake is the modification or deletion of audit records to cover his tracks and prolong discovery.\n\nThe web server must protect the log data from unauthorized deletion. This can be done by the web server if the web server is also doing the logging function. The web server may also use an external log system. In either case, the logs must be protected from deletion by non-privileged users.",
"fixid": "F-47131r2_fix",
"fixtext": "Configure the web server log files so unauthorized deletion of log information is not possible.",
"iacontrols": null,
"id": "V-41672",
"ruleID": "SV-54249r2_rule",
"severity": "medium",
"title": "The log information from the web server must be protected from unauthorized deletion.",
"version": "SRG-APP-000120-WSR-000070"
},
"V-41674": {
"checkid": "C-48071r3_chk",
"checktext": "Review the web server documentation and deployed configuration to determine if the web server log records are backed up onto an unrelated system or media than the system being logged.\n\nIf the web server logs are not backed up onto a different system or media than the system being logged, this is a finding.",
"description": "Protection of log data includes assuring log data is not accidentally lost or deleted. Backing up log records to an unrelated system or onto separate media than the system the web server is actually running on helps to assure that, in the event of a catastrophic system failure, the log records will be retained.",
"fixid": "F-47133r3_fix",
"fixtext": "Configure the web server logs to be backed up onto a different system or media other than the system being logged.",
"iacontrols": null,
"id": "V-41674",
"ruleID": "SV-54251r2_rule",
"severity": "medium",
"title": "The log data and records from the web server must be backed up onto a different system or media.",
"version": "SRG-APP-000125-WSR-000071"
},
"V-41684": {
"checkid": "C-48081r2_chk",
"checktext": "Review the web server documentation and configuration to determine if web server modules are fully tested before implementation in the production environment.\n\nReview the web server for modules identified as test, debug, or backup and that cannot be reached through the hosted application.\n\nReview the web server to see if the web server or an external utility is in use to enforce the signing of modules before they are put into a production environment.\n\nIf development and testing is taking place on the production web server or modules are put into production without being signed, this is a finding.",
"description": "In the case of a production web server, areas for content development and testing will not exist, as this type of content is only permissible on a development website. The process of developing on a functional production website entails a degree of trial and error and repeated testing. This process is often accomplished in an environment where debugging, sequencing, and formatting of content are the main goals. The opportunity for a malicious user to obtain files that reveal business logic and login schemes is high in this situation. The existence of such immature content on a web server represents a significant security risk that is totally avoidable.\n\nThe web server must enforce, internally or through an external utility, the signing of modules before they are implemented into a production environment. By signing modules, the author guarantees that the module has been reviewed and tested before production implementation.",
"fixid": "F-47143r2_fix",
"fixtext": "Configure the web server to enforce, internally or through an external utility, the review, testing and signing of modules before implementation into the production environment.",
"iacontrols": null,
"id": "V-41684",
"ruleID": "SV-54261r2_rule",
"severity": "medium",
"title": "Expansion modules must be fully reviewed, tested, and signed before they can exist on a production web server.",
"version": "SRG-APP-000131-WSR-000073"
},
"V-41693": {
"checkid": "C-48090r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine if web server features, services, and processes are installed that are not needed for hosted application deployment.\n\nIf excessive features, services, and processes are installed, this is a finding.",
"description": "A web server can provide many features, services, and processes. Some of these may be deemed unnecessary or too unsecure to run on a production DoD system. \n\nThe web server must provide the capability to disable, uninstall, or deactivate functionality and services that are deemed to be non-essential to the web server mission or can adversely impact server performance.",
"fixid": "F-47152r2_fix",
"fixtext": "Uninstall or deactivate features, services, and processes not needed by the web server for operation.",
"iacontrols": null,
"id": "V-41693",
"ruleID": "SV-54270r2_rule",
"severity": "medium",
"title": "The web server must only contain services and functions necessary for operation.",
"version": "SRG-APP-000141-WSR-000075"
},
"V-41694": {
"checkid": "C-48091r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine if the web server is also a proxy server.\n\nIf the web server is also acting as a proxy server, this is a finding.",
"description": "A web server should be primarily a web server or a proxy server but not both, for the same reasons that other multi-use servers are not recommended. Scanning for web servers that will also proxy requests into an otherwise protected network is a very common attack making the attack anonymous.",
"fixid": "F-47153r3_fix",
"fixtext": "Uninstall any proxy services, modules, and libraries that are used by the web server to act as a proxy server.\n\nVerify all configuration changes are made to assure the web server is no longer acting as a proxy server in any manner.",
"iacontrols": null,
"id": "V-41694",
"ruleID": "SV-54271r2_rule",
"severity": "medium",
"title": "The web server must not be a proxy server.",
"version": "SRG-APP-000141-WSR-000076"
},
"V-41695": {
"checkid": "C-48092r2_chk",
"checktext": "Review the web server documentation and deployment configuration to determine if the web server contains documentation, sample code, example applications, or tutorials.\n\nVerify the web server install process also offers an option to exclude these elements from installation and provides an uninstall option for their removal.\n\nIf web server documentation, sample code, example applications, or tutorials are installed or the web server install process does not offer an option to exclude these elements from installation, this is a finding.",
"description": "Web server documentation, sample code, example applications, and tutorials may be an exploitable threat to a web server because this type of code has not been evaluated and approved. A production web server must only contain components that are operationally necessary (e.g., compiled code, scripts, web-content, etc.). \n\nAny documentation, sample code, example applications, and tutorials must be removed from a production web server. To make certain that the documentation and code are not installed or uninstalled completely; the web server must offer an option as part of the installation process to exclude these packages or to uninstall the packages if necessary.",
"fixid": "F-47154r2_fix",
"fixtext": "Use the web server uninstall facility or manually remove any documentation, sample code, example applications, and tutorials.",
"iacontrols": null,
"id": "V-41695",
"ruleID": "SV-54272r2_rule",
"severity": "medium",
"title": "The web server must provide install options to exclude the installation of documentation, sample code, example applications, and tutorials.",
"version": "SRG-APP-000141-WSR-000077"
},
"V-41696": {
"checkid": "C-48093r2_chk",
"checktext": "Review the web server documentation to determine the user accounts created when particular features are installed.\n\nVerify the deployed configuration to determine which features are installed with the web server.\n\nIf any accounts exist that are not used by the installed features, this is a finding.",
"description": "When accounts used for web server features such as documentation, sample code, example applications, tutorials, utilities, and services are created even though the feature is not installed, they become an exploitable threat to a web server. \n\nThese accounts become inactive, are not monitored through regular use, and passwords for the accounts are not created or updated. An attacker, through very little effort, can use these accounts to gain access to the web server and begin investigating ways to elevate the account privileges.\n\nThe accounts used for web server features not installed must not be created and must be deleted when these features are uninstalled.",
"fixid": "F-47155r2_fix",
"fixtext": "Use the web server uninstall facility or manually remove the user accounts not used by the installed web server features.",
"iacontrols": null,
"id": "V-41696",
"ruleID": "SV-54273r2_rule",
"severity": "medium",
"title": "Web server accounts not utilized by installed features (i.e., tools, utilities, specific services, etc.) must not be created and must be deleted when the web server feature is uninstalled.",
"version": "SRG-APP-000141-WSR-000078"
},
"V-41698": {
"checkid": "C-48095r3_chk",
"checktext": "Review the web server documentation and deployment configuration to determine which web server utilities, services, and modules are installed. Verify these options are essential to the operation of the web server. Also, confirm the web server install process offers an option to exclude these utilities, services, and modules from installation that are not needed for operation and that there is an uninstall option for their removal. \n\nIf there are more utilities, services, or modules installed than are needed for the operation of the web server or the web server does not provide an install facility to customize installation, this is a finding.",
"description": "Just as running unneeded services and protocols is a danger to the web server at the lower levels of the OSI model, running unneeded utilities and programs is also a danger at the application layer of the OSI model. Office suites, development tools, and graphical editors are examples of such programs that are troublesome. \n\nIndividual productivity tools have no legitimate place or use on an enterprise, production web server and they are also prone to their own security risks. The web server installation process must provide options allowing the installer to choose which utility programs, services, and modules are to be installed or removed. By having a process for installation and removal, the web server is guaranteed to be in a more stable and secure state than if these services and programs were installed and removed manually.",
"fixid": "F-47157r2_fix",
"fixtext": "Use the web server uninstall facility or manually remove any utility programs, services, or modules not needed by the web server for operation.",
"iacontrols": null,
"id": "V-41698",
"ruleID": "SV-54275r2_rule",
"severity": "medium",
"title": "The web server must provide install options to exclude installation of utility programs, services, plug-ins, and modules not necessary for operation.",
"version": "SRG-APP-000141-WSR-000080"
},
"V-41699": {
"checkid": "C-48096r2_chk",
"checktext": "Review the web server documentation and deployment configuration to determine if the OS shell is accessible by any MIME types that are enabled.\n\nIf a user of the web server can invoke OS shell programs, this is a finding.",
"description": "Controlling what a user of a hosted application can access is part of the security posture of the web server. Any time a user can access more functionality than is needed for the operation of the hosted application poses a security issue. A user with too much access can view information that is not needed for the user's job role, or the user could use the function in an unintentional manner.\n\nA MIME tells the web server what type of program various file types and extensions are and what external utilities or programs are needed to execute the file type.\n\nA shell is a program that serves as the basic interface between the user and the operating system, so hosted application users must not have access to these programs. Shell programs may execute shell escapes and can then perform unauthorized activities that could damage the security posture of the web server.",
"fixid": "F-47158r2_fix",
"fixtext": "Configure the web server to disable all MIME types that invoke OS shell programs.",
"iacontrols": null,
"id": "V-41699",
"ruleID": "SV-54276r2_rule",
"severity": "medium",
"title": "The web server must have Multipurpose Internet Mail Extensions (MIME) that invoke OS shell programs disabled.",
"version": "SRG-APP-000141-WSR-000081"
},
"V-41700": {
"checkid": "C-48097r2_chk",
"checktext": "Review the web server documentation and deployment configuration to determine what script mappings are available.\n\nReview the scripts used by the web server and the hosted applications.\n\nIf there are script mappings in use that are not used by the web server or hosted applications for operation, this is a finding.",
"description": "Scripts allow server side processing on behalf of the hosted application user or as processes needed in the implementation of hosted applications. Removing scripts not needed for application operation or deemed vulnerable helps to secure the web server. \n\nTo assure scripts are not added to the web server and run maliciously, those script mappings that are not needed or used by the web server for hosted application operation must be removed.",
"fixid": "F-47159r2_fix",
"fixtext": "Remove script mappings that are not needed for web server and hosted application operation.",
"iacontrols": null,
"id": "V-41700",
"ruleID": "SV-54277r2_rule",
"severity": "medium",
"title": "The web server must allow the mappings to unused and vulnerable scripts to be removed.",
"version": "SRG-APP-000141-WSR-000082"
},
"V-41701": {
"checkid": "C-48098r2_chk",
"checktext": "Review the web server documentation and deployment configuration to determine what types of files are being used for the hosted applications.\n\nIf the web server is configured to allow other file types not associated with the hosted application, especially those associated with logs, configuration files, passwords, etc., this is a finding.",
"description": "Resource mapping is the process of tying a particular file type to a process in the web server that can serve that type of file to a requesting client and to identify which file types are not to be delivered to a client.\n\nBy not specifying which files can and which files cannot be served to a user, the web server could deliver to a user web server configuration files, log files, password files, etc. \n\nThe web server must only allow hosted application file types to be served to a user and all other types must be disabled.",
"fixid": "F-47160r2_fix",
"fixtext": "Configure the web server to only serve file types to the user that are needed by the hosted applications. All other file types must be disabled.",
"iacontrols": null,
"id": "V-41701",
"ruleID": "SV-54278r2_rule",
"severity": "medium",
"title": "The web server must have resource mappings set to disable the serving of certain file types.",
"version": "SRG-APP-000141-WSR-000083"
},
"V-41702": {
"checkid": "C-48099r2_chk",
"checktext": "Review the web server documentation and deployment configuration to determine if Web Distributed Authoring (WebDAV) is enabled.\n\nIf WebDAV is enabled, this is a finding.",
"description": "A web server can be installed with functionality that, just by its nature, is not secure. Web Distributed Authoring (WebDAV) is an extension to the HTTP protocol that, when developed, was meant to allow users to create, change, and move documents on a server, typically a web server or web share. Allowing this functionality, development, and deployment is much easier for web authors.\n\nWebDAV is not widely used and has serious security concerns because it may allow clients to modify unauthorized files on the web server.",
"fixid": "F-47161r2_fix",
"fixtext": "Configure the web server to disable Web Distributed Authoring.",
"iacontrols": null,
"id": "V-41702",
"ruleID": "SV-54279r2_rule",
"severity": "medium",
"title": "The web server must have Web Distributed Authoring (WebDAV) disabled.",
"version": "SRG-APP-000141-WSR-000085"
},
"V-41703": {
"checkid": "C-48100r2_chk",
"checktext": "Review the web server documentation and configuration to determine the access to server resources given to hosted applications.\n\nIf hosted applications have access to more system resources than needed for operation, this is a finding.",
"description": "A web server may host one too many applications. Each application will need certain system resources and privileged operations to operate correctly. The web server must be configured to contain and control the applications and protect the system resources and privileged operations from those not needed by the application for operation. \n\nLimiting the application will confine the potential harm a compromised application could cause to a system.",
"fixid": "F-47162r2_fix",
"fixtext": "Configure the privileges given to hosted applications to the minimum required for application operation.",
"iacontrols": null,
"id": "V-41703",
"ruleID": "SV-54280r2_rule",
"severity": "medium",
"title": "The web server must protect system resources and privileged operations from hosted applications.",
"version": "SRG-APP-000141-WSR-000086"
},
"V-41704": {
"checkid": "C-48101r3_chk",
"checktext": "Review the web server documentation and configuration to determine where the document root or home directory for each application hosted by the web server is located.\n\nVerify that users of the web server applications, and any scripts running on the user's behalf, are contained to each application's domain.\n\nIf users of the web server applications, and any scripts running on the user's behalf, are not contained, this is a finding.",
"description": "A web server is designed to deliver content and execute scripts or applications on the request of a client or user. Containing user requests to files in the directory tree of the hosted web application and limiting the execution of scripts and applications guarantees that the user is not accessing information protected outside the application's realm. \n\nThe web server must also prohibit users from jumping outside the hosted application directory tree through access to the user's home directory, symbolic links or shortcuts, or through search paths for missing files.",
"fixid": "F-47163r2_fix",
"fixtext": "Configure the web server to contain users and scripts to each hosted application's domain.",
"iacontrols": null,
"id": "V-41704",
"ruleID": "SV-54281r2_rule",
"severity": "medium",
"title": "Users and scripts running on behalf of users must be contained to the document root or home directory tree of the web server.",
"version": "SRG-APP-000141-WSR-000087"
},
"V-41706": {
"checkid": "C-48103r2_chk",
"checktext": "Review the web server documentation and deployment configuration to determine whether the web server is configured to listen on a specified IP address and port.\n\nRequest a client user try to access the web server on any other available IP addresses on the hosting hardware.\n\nIf an IP address is not configured on the web server or a client can reach the web server on other IP addresses assigned to the hosting hardware, this is a finding.",
"description": "The web server must be configured to listen on a specified IP address and port. Without specifying an IP address and port for the web server to utilize, the web server will listen on all IP addresses available to the hosting server. If the web server has multiple IP addresses, i.e., a management IP address, the web server will also accept connections on the management IP address. \n\nAccessing the hosted application through an IP address normally used for non-application functions opens the possibility of user access to resources, utilities, files, ports, and protocols that are protected on the desired application IP address.",
"fixid": "F-47165r2_fix",
"fixtext": "Configure the web server to only listen on a specified IP address and port.",
"iacontrols": null,
"id": "V-41706",
"ruleID": "SV-54283r2_rule",
"severity": "medium",
"title": "The web server must be configured to use a specified IP address and port.",
"version": "SRG-APP-000142-WSR-000089"
},
"V-41730": {
"checkid": "C-48127r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine whether the web server provides PKI functionality that validates certification paths in accordance with RFC 5280. If PKI is not being used, this is NA. \n\nIf the web server is using PKI, but it does not perform this requirement, this is a finding.",
"description": "A certificate's certification path is the path from the end entity certificate to a trusted root certification authority (CA). Certification path validation is necessary for a relying party to make an informed decision regarding acceptance of an end entity certificate. Certification path validation includes checks such as certificate issuer trust, time validity and revocation status for each certificate in the certification path. Revocation status information for CA and subject certificates in a certification path is commonly provided via certificate revocation lists (CRLs) or online certificate status protocol (OCSP) responses.",
"fixid": "F-47189r4_fix",
"fixtext": "Configure the web server to validate certificates in accordance with RFC 5280.",
"iacontrols": null,
"id": "V-41730",
"ruleID": "SV-54307r2_rule",
"severity": "medium",
"title": "The web server must perform RFC 5280-compliant certification path validation.",
"version": "SRG-APP-000175-WSR-000095"
},
"V-41731": {
"checkid": "C-48128r2_chk",
"checktext": "If the web server does not have a private key, this is N/A. \n\nReview the web server documentation and deployed configuration to determine whether only authenticated system administrators and the designated PKI Sponsor for the web server can access the web server private key.\n\nIf the private key is accessible by unauthenticated or unauthorized users, this is a finding.",
"description": "The web server's private key is used to prove the identity of the server to clients and securely exchange the shared secret key used to encrypt communications between the web server and clients.\n\nBy gaining access to the private key, an attacker can pretend to be an authorized server and decrypt the SSL traffic between a client and the web server.",
"fixid": "F-47190r2_fix",
"fixtext": "Configure the web server to ensure only authenticated and authorized users can access the web server's private key.",
"iacontrols": null,
"id": "V-41731",
"ruleID": "SV-54308r2_rule",
"severity": "medium",
"title": "Only authenticated system administrators or the designated PKI Sponsor for the web server must have access to the web servers private key.",
"version": "SRG-APP-000176-WSR-000096"
},
"V-41738": {
"checkid": "C-48135r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine whether passwords are being passed to or from the web server.\n\nIf the transmission of passwords is not encrypted, this is a finding.",
"description": "Data used to authenticate, especially passwords, needs to be protected at all times, and encryption is the standard method for protecting authentication data during transmission. Data used to authenticate can be passed to and from the web server for many reasons. \n\nExamples include data passed from a user to the web server through an HTTPS connection for authentication, the web server authenticating to a backend database for data retrieval and posting, and the web server authenticating to a clustered web server manager for an update.",
"fixid": "F-47197r2_fix",
"fixtext": "Configure the web server to encrypt the transmission passwords.",
"iacontrols": null,
"id": "V-41738",
"ruleID": "SV-54315r2_rule",
"severity": "medium",
"title": "The web server must encrypt passwords during transmission.",
"version": "SRG-APP-000172-WSR-000104"
},
"V-41745": {
"checkid": "C-48142r2_chk",
"checktext": "Review web server documentation and deployed configuration to determine whether the encryption modules utilized for storage of data are FIPS 140-2 compliant.\n\nReference the following NIST site to identify validated encryption modules: \n\nhttp://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140val-all.htm\n\nIf the encryption modules used for storage of data are not FIPS 140-2 validated, this is a finding.",
"description": "Encryption is only as good as the encryption modules utilized. Unapproved cryptographic module algorithms cannot be verified, and cannot be relied upon to provide confidentiality or integrity, and DoD data may be compromised due to weak algorithms. \n\nFIPS 140-2 is the current standard for validating cryptographic modules and NSA Type-X (where X=1, 2, 3, 4) products are NSA-certified, hardware-based encryption modules.\n\nThe web server must provide FIPS-compliant encryption modules when storing encrypted data and configuration settings.",
"fixid": "F-47204r2_fix",
"fixtext": "Configure the web server to utilize FIPS 140-2 approved encryption modules when the web server is storing data.",
"iacontrols": null,
"id": "V-41745",
"ruleID": "SV-54322r2_rule",
"severity": "medium",
"title": "The web server must use cryptographic modules that meet the requirements of applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance when encrypting stored data.",
"version": "SRG-APP-000179-WSR-000110"
},
"V-41746": {
"checkid": "C-48143r2_chk",
"checktext": "Review web server documentation and deployed configuration to determine whether the encryption modules utilized for authentication are FIPS 140-2 compliant. Reference the following NIST site to identify validated encryption modules: http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140val-all.htm\n\nIf the encryption modules used for authentication are not FIPS 140-2 validated, this is a finding.",
"description": "Encryption is only as good as the encryption modules utilized. Unapproved cryptographic module algorithms cannot be verified and cannot be relied upon to provide confidentiality or integrity, and DoD data may be compromised due to weak algorithms. \n\nFIPS 140-2 is the current standard for validating cryptographic modules and NSA Type-X (where X=1, 2, 3, 4) products are NSA-certified, hardware-based encryption modules. \n\nThe web server must provide FIPS-compliant encryption modules when authenticating users and processes.",
"fixid": "F-47205r2_fix",
"fixtext": "Configure the web server to utilize FIPS 140-2 approved encryption modules when authenticating users and processes.",
"iacontrols": null,
"id": "V-41746",
"ruleID": "SV-54323r2_rule",
"severity": "medium",
"title": "The web server must use cryptographic modules that meet the requirements of applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance for such authentication.",
"version": "SRG-APP-000179-WSR-000111"
},
"V-41794": {
"checkid": "C-48182r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine whether hosted application functionality is separated from web server management functions.\n\nIf the functions are not separated, this is a finding.",
"description": "The separation of user functionality from web server management can be accomplished by moving management functions to a separate IP address or port. To further separate the management functions, separate authentication methods and certificates should be used. \n\nBy moving the management functionality, the possibility of accidental discovery of the management functions by non-privileged users during hosted application use is minimized.",
"fixid": "F-47253r2_fix",
"fixtext": "Configure the web server to separate the hosted applications from web server management functionality.",
"iacontrols": null,
"id": "V-41794",
"ruleID": "SV-54371r2_rule",
"severity": "medium",
"title": "The web server must separate the hosted applications from hosted web server management functionality.",
"version": "SRG-APP-000211-WSR-000129"
},
"V-41807": {
"checkid": "C-48195r2_chk",
"checktext": "Review the web server documentation and deployed configuration to verify that random and unique session identifiers are generated.\n\nAccess the web server ID generator function and generate two IDs using the same input.\n\nIf the web server is not configured to generate random and unique session identifiers, or the ID generator generates the same ID for the same input, this is a finding.",
"description": "Communication between a client and the web server is done using the HTTP protocol, but HTTP is a stateless protocol. In order to maintain a connection or session, a web server will generate a session identifier (ID) for each client session when the session is initiated. The session ID allows the web server to track a user session and, in many cases, the user, if the user previously logged into a hosted application.\n\nBy being able to guess session IDs, an attacker can easily perform a man-in-the-middle attack. To truly generate random session identifiers that cannot be reproduced, the web server session ID generator, when used twice with the same input criteria, must generate an unrelated random ID.\n\nThe session ID generator also needs to be a FIPS 140-2 approved generator.",
"fixid": "F-47266r2_fix",
"fixtext": "Configure the web server to generate random and unique session identifiers that cannot be reliably reproduced.",
"iacontrols": null,
"id": "V-41807",
"ruleID": "SV-54384r2_rule",
"severity": "medium",
"title": "The web server must generate unique session identifiers that cannot be reliably reproduced.",
"version": "SRG-APP-000224-WSR-000136"
},
"V-41808": {
"checkid": "C-48196r2_chk",
"checktext": "Review the web server documentation and deployed configuration to see how long the generated session identifiers are.\n\nIf the web server is not configured to generate session identifiers that are at least 128 bits (16 bytes) in length, this is a finding.",
"description": "Generating a session identifier (ID) that is not easily guessed through brute force is essential to deter several types of session attacks. By knowing the session ID, an attacker can hijack a user session that has already been user authenticated by the hosted application. The attacker does not need to guess user identifiers and passwords or have a secure token since the user session has already been authenticated.\n\nGenerating session IDs that are at least 128 bits (16 bytes) in length will cause an attacker to take a large amount of time and resources to guess, reducing the likelihood of an attacker guessing a session ID.",
"fixid": "F-47267r2_fix",
"fixtext": "Configure the web server to generate session identifiers that are at least 128 bits in length.",
"iacontrols": null,
"id": "V-41808",
"ruleID": "SV-54385r2_rule",
"severity": "medium",
"title": "The web server must generate a session ID long enough that it cannot be guessed through brute force.",
"version": "SRG-APP-000224-WSR-000137"
},
"V-41809": {
"checkid": "C-48197r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine what characters are used in generating session IDs.\n\nIf the web server is not configured to use at least A-Z, a-z, and 0-9 to generate session identifiers, this is a finding.",
"description": "Generating a session identifier (ID) that is not easily guessed through brute force is essential to deter several types of session attacks. By knowing the session ID, an attacker can hijack a user session that has already been user-authenticated by the hosted application. The attacker does not need to guess user identifiers and passwords or have a secure token since the user session has already been authenticated.\n\nBy generating session IDs that contain as much of the character set as possible, i.e., A-Z, a-z, and 0-9, the session ID becomes exponentially harder to guess.",
"fixid": "F-47268r2_fix",
"fixtext": "Configure the web server to use at least A-Z, a-z, and 0-9 to generate session IDs.",
"iacontrols": null,
"id": "V-41809",
"ruleID": "SV-54386r2_rule",
"severity": "medium",
"title": "The web server must generate a session ID using as much of the character set as possible to reduce the risk of brute force.",
"version": "SRG-APP-000224-WSR-000138"
},
"V-41810": {
"checkid": "C-48198r3_chk",
"checktext": "Review the web server documentation and deployed configuration to verify that the web server is generating random session IDs with entropy equal to at least half the session ID length.\n\nIf the web server is not configured to generate random session IDs with the proper amount of entropy, this is a finding.",
"description": "Generating a session identifier (ID) that is not easily guessed through brute force is essential to deter several types of session attacks. By knowing the session ID, an attacker can hijack a user session that has already been user authenticated by the hosted application. The attacker does not need to guess user identifiers and passwords or have a secure token since the user session has already been authenticated.\n\nRandom and unique session IDs are the opposite of sequentially generated session IDs, which can be easily guessed by an attacker. Random session identifiers help to reduce predictability of said identifiers. The session ID must be unpredictable (random enough) to prevent guessing attacks, where an attacker is able to guess or predict the ID of a valid session through statistical analysis techniques. For this purpose, a good PRNG (Pseudo Random Number Generator) must be used.\n\nUnique session IDs address man-in-the-middle attacks, including session hijacking or insertion of false information into a session. If the attacker is unable to identify or guess the session information related to pending application traffic, they will have more difficulty in hijacking the session or otherwise manipulating valid sessions.\n\nAt least half of a session ID must be created using a definable source of entropy (PRNG).",
"fixid": "F-47269r2_fix",
"fixtext": "Configure the web server to generate random session IDs with minimum entropy equal to half the session ID length.",
"iacontrols": null,
"id": "V-41810",
"ruleID": "SV-54387r2_rule",
"severity": "medium",
"title": "The web server must generate unique session identifiers with definable entropy.",
"version": "SRG-APP-000224-WSR-000139"
},
"V-41811": {
"checkid": "C-48199r2_chk",
"checktext": "Review the web server documentation, deployed configuration, and risk analysis documentation to determine whether the web server will fail to known states for system initialization, shutdown, or abort failures.\n\nIf the web server will not fail to known state, this is a finding.",
"description": "Determining a safe state for failure and weighing that against a potential DoS for users depends on what type of application the web server is hosting. For an application presenting publicly available information that is not critical, a safe state for failure might be to shut down for any type of failure; but for an application that presents critical and timely information, a shutdown might not be the best state for all failures. \n\nPerforming a proper risk analysis of the hosted applications and configuring the web server according to what actions to take for each failure condition will provide a known fail safe state for the web server.",
"fixid": "F-47270r3_fix",
"fixtext": "Configure the web server to fail to the states of operation during system initialization, shutdown, or abort failures found in the risk analysis.",
"iacontrols": null,
"id": "V-41811",
"ruleID": "SV-54388r2_rule",
"severity": "medium",
"title": "The web server must be built to fail to a known safe state if system initialization fails, shutdown fails, or aborts fail.",
"version": "SRG-APP-000225-WSR-000140"
},
"V-41812": {
"checkid": "C-48200r2_chk",
"checktext": "Review the web server documentation, deployed configuration, and risk analysis documentation to verify that the web server is configured to provide clustering functionality, if the web server is a high-availability web server.\n\nIf the web server is not a high-availability web server, this finding is NA.\n\nIf the web server is not configured to provide clustering or some form of failover functionality and the web server is a high-availability server, this is a finding.",
"description": "The web server may host applications that display information that cannot be disrupted, such as information that is time-critical or life-threatening. In these cases, a web server that shuts down or ceases to be accessible when there is a failure is not acceptable. In these types of cases, clustering of web servers is used. \n\nClustering of multiple web servers is a common approach to providing fail-safe application availability. To assure application availability, the web server must provide clustering or some form of failover functionality.",
"fixid": "F-47271r2_fix",
"fixtext": "Configure the web server to provide application failover, or participate in a web cluster that provides failover for high-availability web servers.",
"iacontrols": null,
"id": "V-41812",
"ruleID": "SV-54389r2_rule",
"severity": "medium",
"title": "The web server must provide a clustering capability.",
"version": "SRG-APP-000225-WSR-000141"
},
"V-41815": {
"checkid": "C-48203r2_chk",
"checktext": "Review the web server documentation and deployed configuration to locate where potential data at rest is stored.\n\nVerify that the data is encrypted using a DoD-accepted algorithm to protect the confidentiality and integrity of the information.\n\nIf the data is not encrypted using a DoD-accepted algorithm, this is a finding.",
"description": "Data at rest is inactive data which is stored physically in any digital form (e.g., databases, data warehouses, spreadsheets, archives, tapes, off-site backups, mobile devices, etc.). Data at rest includes, but is not limited to, archived data, data which is not accessed or changed frequently, files stored on hard drives, USB thumb drives, files stored on backup tape and disks, and files stored off-site or on a storage area network.\n\nWhile data at rest can reside in many places, data at rest for a web server is data on the hosting system storage devices. Data stored as a backup on tape or stored off-site is no longer under the protection measures covered by the web server.\n\nThere are several pieces of data that the web server uses during operation. The web server must use an accepted encryption method, such as SHA1, to protect the confidentiality and integrity of the information.",
"fixid": "F-47274r2_fix",
"fixtext": "Use a DoD-accepted algorithm to encrypt data at rest to protect the information's confidentiality and integrity.",
"iacontrols": null,
"id": "V-41815",
"ruleID": "SV-54392r2_rule",
"severity": "medium",
"title": "Information at rest must be encrypted using a DoD-accepted algorithm to protect the confidentiality and integrity of the information.",
"version": "SRG-APP-000231-WSR-000144"
},
"V-41818": {
"checkid": "C-48206r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine whether the web server accepts session IDs that are not system-generated.\n\nIf the web server does accept non-system-generated session IDs, this is a finding.",
"description": "Communication between a client and the web server is done using the HTTP protocol, but HTTP is a stateless protocol. In order to maintain a connection or session, a web server will generate a session identifier (ID) for each client session when the session is initiated. The session ID allows the web server to track a user session and, in many cases, the user, if the user previously logged into a hosted application.\n\nWhen a web server accepts session identifiers that are not generated by the web server, the web server creates an environment where session hijacking, such as session fixation, could be used to access hosted applications through session IDs that have already been authenticated. Forcing the web server to only accept web server-generated session IDs and to create new session IDs once a user is authenticated will limit session hijacking.",
"fixid": "F-47277r3_fix",
"fixtext": "Configure the web server to only accept session IDs that are created by the web server.",
"iacontrols": null,
"id": "V-41818",
"ruleID": "SV-54395r2_rule",
"severity": "medium",
"title": "The web server must accept only system-generated session identifiers.",
"version": "SRG-APP-000223-WSR-000145"
},
"V-41821": {
"checkid": "C-48209r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine where the document directory is located for each hosted application.\n\nIf the document directory is not in a separate partition from the web server's system files, this is a finding.",
"description": "A web server is used to deliver content on the request of a client. The content delivered to a client must be controlled, allowing only hosted application files to be accessed and delivered. To allow a client access to system files of any type is a major security risk that is entirely avoidable. Obtaining such access is the goal of directory traversal and URL manipulation vulnerabilities. To facilitate such access by misconfiguring the web document (home) directory is a serious error. In addition, having the path on the same drive as the system folder compounds potential attacks such as drive space exhaustion.",
"fixid": "F-47280r2_fix",
"fixtext": "Configure the web server to place the document directories in a separate partition from the web server system files.",
"iacontrols": null,
"id": "V-41821",
"ruleID": "SV-54398r2_rule",
"severity": "medium",
"title": "The web server document directory must be in a separate partition from the web servers system files.",
"version": "SRG-APP-000233-WSR-000146"
},
"V-41833": {
"checkid": "C-48221r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine whether the web server has been configured to limit the ability of the web server to be used in a DoS attack.\n\nIf not, this is a finding.",
"description": "A web server can limit the ability of the web server being used in a DoS attack through several methods. The methods employed will depend upon the hosted applications and their resource needs for proper operation. \n\nAn example setting that could be used to limit the ability of the web server being used in a DoS attack is bandwidth throttling.",
"fixid": "F-47292r2_fix",
"fixtext": "Configure the web server to limit the ability of users to use the web server in a DoS attack.",
"iacontrols": null,
"id": "V-41833",
"ruleID": "SV-54410r2_rule",
"severity": "medium",
"title": "The web server must restrict the ability of users to launch Denial of Service (DoS) attacks against other information systems or networks.",
"version": "SRG-APP-000246-WSR-000149"
},
"V-41852": {
"checkid": "C-48240r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine what the data set is for data entry.\n\nIf the web server does not limit the data set used for data entry, this is a finding.",
"description": "Invalid user input occurs when a user inserts data or characters into a hosted application's data entry field and the hosted application is unprepared to process that data. This results in unanticipated application behavior, potentially leading to an application compromise. Invalid user input is one of the primary methods employed when attempting to compromise an application. \n\nAn attacker can also enter Unicode into hosted applications in an effort to break out of the document home or root home directory or to bypass security checks.\n\nThe web server, by defining the character set available for data entry, can trap efforts to bypass security checks or to compromise an application.",
"fixid": "F-47311r2_fix",
"fixtext": "Configure the web server to only accept the character sets expected by the hosted applications.",
"iacontrols": null,
"id": "V-41852",
"ruleID": "SV-54429r2_rule",
"severity": "medium",
"title": "The web server must limit the character set used for data entry.",
"version": "SRG-APP-000251-WSR-000157"
},
"V-41854": {
"checkid": "C-48242r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine whether the web server offers different modes of operation that will minimize the identity of the web server, patches, loaded modules, and directory paths given to clients on error conditions.\n\nIf the web server is not configured to minimize the information given to clients, this is a finding.",
"description": "Information needed by an attacker to begin looking for possible vulnerabilities in a web server includes any information about the web server, backend systems being accessed, and plug-ins or modules being used. \n\nWeb servers will often display error messages to client users displaying enough information to aid in the debugging of the error. The information given back in error messages may display the web server type, version, patches installed, plug-ins and modules installed, type of code being used by the hosted application, and any backends being used for data storage. \n\nThis information could be used by an attacker to blueprint what type of attacks might be successful. The information given to users must be minimized to not aid in the blueprinting of the web server.",
"fixid": "F-47313r2_fix",
"fixtext": "Configure the web server to minimize the information provided to the client in warning and error messages.",
"iacontrols": null,
"id": "V-41854",
"ruleID": "SV-54431r2_rule",
"severity": "medium",
"title": "Warning and error messages displayed to clients must be modified to minimize the identity of the web server, patches, loaded modules, and directory paths.",
"version": "SRG-APP-000266-WSR-000159"
},
"V-41855": {
"checkid": "C-48243r3_chk",
"checktext": "Review the web server documentation and deployed configuration to determine if debugging and trace information are enabled.\n\nIf the web server is configured with debugging and trace information enabled, this is a finding.",
"description": "Information needed by an attacker to begin looking for possible vulnerabilities in a web server includes any information about the web server and plug-ins or modules being used. When debugging or trace information is enabled in a production web server, information about the web server, such as web server type, version, patches installed, plug-ins and modules installed, type of code being used by the hosted application, and any backends being used for data storage may be displayed. Since this information may be placed in logs and general messages during normal operation of the web server, an attacker does not need to cause an error condition to gain this information.",
"fixid": "F-47314r2_fix",
"fixtext": "Configure the web server to minimize the information given to clients on error conditions by disabling debugging and trace information.",
"iacontrols": null,
"id": "V-41855",
"ruleID": "SV-54432r2_rule",
"severity": "medium",
"title": "Debugging and trace information used to diagnose the web server must be disabled.",
"version": "SRG-APP-000266-WSR-000160"
},
"V-55945": {
"checkid": "C-56515r2_chk",
"checktext": "The web server must be configured to perform an authorization check to verify that the authenticated entity should be granted access to the requested content.\n\nIf the web server does not verify that the authenticated entity is authorized to access the requested content prior to granting access, this is a finding.",
"description": "To control access to sensitive information and hosted applications by entities that have been issued certificates by DoD-approved PKIs, the web server must be properly configured to incorporate a means of authorization that does not simply rely on the possession of a valid certificate for access. Access decisions must include a verification that the authenticated entity is permitted to access the information or application. Authorization decisions must leverage a variety of methods, such as mapping the validated PKI certificate to an account with an associated set of permissions on the system. If the web server relied only on the possession of the certificate and did not map to system roles and privileges, each user would have the same abilities and roles to make changes to the production system.",
"fixid": "F-60823r1_fix",
"fixtext": "Configure the web server to validate the authenticated entity's authorization to access requested content prior to granting access.",
"iacontrols": null,
"id": "V-55945",
"ruleID": "SV-70199r1_rule",
"severity": "medium",
"title": "The web server must enforce approved authorizations for logical access to hosted applications and resources in accordance with applicable access control policies.",
"version": "SRG-APP-000033-WSR-000169"
},
"V-55947": {
"checkid": "C-56517r2_chk",
"checktext": "Review the web server documentation and configuration to determine if accounts used for administrative duties of the web server are separated from non-privileged accounts.\n\nIf non-privileged accounts can access web server security-relevant information, this is a finding.",
"description": "By separating web server security functions from non-privileged users, roles can be developed that can then be used to administer the web server. Forcing users to change from a non-privileged account to a privileged account when operating on the web server or on security-relevant information forces users to only operate as a web server administrator when necessary. Operating in this manner allows for better logging of changes and better forensic information and limits accidental changes to the web server.",
"fixid": "F-60825r1_fix",
"fixtext": "Set up accounts and roles that can be used to perform web server security-relevant tasks and remove or modify non-privileged account access to security-relevant tasks.",
"iacontrols": null,
"id": "V-55947",
"ruleID": "SV-70201r1_rule",
"severity": "medium",
"title": "Non-privileged accounts on the hosting system must only access web server security-relevant information and functions through a distinct administrative account.",
"version": "SRG-APP-000340-WSR-000029"
},
"V-55949": {
"checkid": "C-56519r2_chk",
"checktext": "Review the hosted applications, web server documentation and deployed configuration to verify that the web server will close an open session after a configurable time of inactivity.\n\nIf the web server does not close sessions after a configurable time of inactivity or the amount of time is configured higher than 5 minutes for high-risk applications, 10 minutes for medium-risk applications, or 20 minutes for low-risk applications, this is a finding.",
"description": "Leaving sessions open indefinitely is a major security risk. An attacker can easily use an already authenticated session to access the hosted application as the previously authenticated user. By closing sessions after a set period of inactivity, the web server can make certain that those sessions that are not closed through the user logging out of an application are eventually closed. \n\nAcceptable values are 5 minutes for high-value applications, 10 minutes for medium-value applications, and 20 minutes for low-value applications.",
"fixid": "F-60827r1_fix",
"fixtext": "Configure the web server to close inactive sessions after 5 minutes for high-risk applications, 10 minutes for medium-risk applications, or 20 minutes for low-risk applications.",
"iacontrols": null,
"id": "V-55949",
"ruleID": "SV-70203r1_rule",
"severity": "medium",
"title": "The web server must set an inactive timeout for sessions.",
"version": "SRG-APP-000295-WSR-000134"
},
"V-55951": {
"checkid": "C-56521r2_chk",
"checktext": "Review the web server documentation and deployed configuration to verify that the web server is configured to close sessions after an absolute period of time.\n\nIf the web server is not configured to close sessions after an absolute period of time, this is a finding.",
"description": "Leaving sessions open indefinitely is a major security risk. An attacker can easily use an already authenticated session to access the hosted application as the previously authenticated user. By closing sessions after an absolute period of time, the user is forced to re-authenticate guaranteeing the session is still in use. Enabling an absolute timeout for sessions closes sessions that are still active. Examples would be a runaway process accessing the web server or an attacker using a hijacked session to slowly probe the web server.",
"fixid": "F-60829r1_fix",
"fixtext": "Configure the web server to close sessions after an absolute period of time.",
"iacontrols": null,
"id": "V-55951",
"ruleID": "SV-70205r1_rule",
"severity": "medium",
"title": "The web server must set an absolute timeout for sessions.",
"version": "SRG-APP-000295-WSR-000012"
},
"V-55953": {
"checkid": "C-56523r2_chk",
"checktext": "Review the web server product documentation and deployed configuration to determine if the server or an enterprise tool is enforcing the organization's requirements for remote connections.\n\nIf the web server is not configured to enforce these requirements and an enterprise tool is not in place, this is a finding.",
"description": "Remote access to the web server is any access that communicates through an external, non-organization-controlled network. Remote access can be used to access hosted applications or to perform management functions.\n\nA web server can be accessed remotely and must be able to enforce remote access policy requirements or work in conjunction with enterprise tools designed to enforce policy requirements. \n\nExamples of the web server enforcing a remote access policy are implementing IP filtering rules, using https instead of http for communication, implementing secure tokens, and validating users.",
"fixid": "F-60831r2_fix",
"fixtext": "Configure the web server to enforce the remote access policy or to work with an enterprise tool designed to enforce the policy.",
"iacontrols": null,
"id": "V-55953",
"ruleID": "SV-70207r1_rule",
"severity": "medium",
"title": "Remote access to the web server must follow access policy or work in conjunction with enterprise tools designed to enforce policy requirements.",
"version": "SRG-APP-000315-WSR-000003"
},
"V-55955": {
"checkid": "C-56525r2_chk",
"checktext": "Review the web server documentation and configuration to make certain that the web server is configured to allow for the immediate disconnection or disabling of remote access to hosted applications when necessary.\n\nIf the web server is not capable of or cannot be configured to disconnect or disable remote access to the hosted applications when necessary, this is a finding.",
"description": "During an attack on the web server or any of the hosted applications, the system administrator may need to disconnect or disable access by users to stop the attack. \n\nThe web server must provide a capability to disconnect users to a hosted application without compromising other hosted applications unless deemed necessary to stop the attack. Methods to disconnect or disable connections are to stop the application service for a specified hosted application, stop the web server, or block all connections through web server access list. \n\nThe web server capabilities used to disconnect or disable users from connecting to hosted applications and the web server must be documented to make certain that, during an attack, the proper action is taken to conserve connectivity to any other hosted application if possible and to make certain log data is conserved for later forensic analysis.",
"fixid": "F-60833r1_fix",
"fixtext": "Configure the web server to provide the capability to immediately disconnect or disable remote access to the hosted applications.",
"iacontrols": null,
"id": "V-55955",
"ruleID": "SV-70209r1_rule",
"severity": "medium",
"title": "The web server must provide the capability to immediately disconnect or disable remote access to the hosted applications.",
"version": "SRG-APP-000316-WSR-000170"
},
"V-55957": {
"checkid": "C-56527r2_chk",
"checktext": "Review the web server documentation and configuration to determine if the web server is part of a cluster.\n\nIf the web server is not part of a cluster, then this is NA. \n\nIf the web server is part of a cluster and is not centrally managed, then this is a finding.",
"description": "A web server cluster is a group of independent web servers that are managed as a single system for higher availability, easier manageability, and greater scalability. Without having centralized control of the web server cluster, management of the cluster becomes difficult. It is critical that remote management of the cluster be done through a designated management system acting as a single access point.",
"fixid": "F-60835r1_fix",
"fixtext": "Configure the web server to be centrally managed.",
"iacontrols": null,
"id": "V-55957",
"ruleID": "SV-70211r1_rule",
"severity": "medium",
"title": "A web server that is part of a web server cluster must route all remote management through a centrally managed access control point.",
"version": "SRG-APP-000356-WSR-000007"
},
"V-55959": {
"checkid": "C-56529r2_chk",
"checktext": "Review the web server documentation and deployment configuration to determine if the web server is using a logging mechanism to store log records. If a logging mechanism is in use, validate that the mechanism is configured to use record storage capacity in accordance with specifications within NIST SP 800-92 for log record storage requirements.\n\nIf the web server is not using a logging mechanism, or if the mechanism has not been configured to allocate log record storage capacity in accordance with NIST SP 800-92, this is a finding.",
"description": "In order to make certain that the logging mechanism used by the web server has sufficient storage capacity in which to write the logs, the logging mechanism needs to be able to allocate log record storage capacity. \n\nThe task of allocating log record storage capacity is usually performed during initial installation of the logging mechanism. The system administrator will usually coordinate the allocation of physical drive space with the web server administrator along with the physical location of the partition and disk. Refer to NIST SP 800-92 for specific requirements on log rotation and storage dependent on the impact of the web server.",
"fixid": "F-60837r1_fix",
"fixtext": "Configure the web server to use a logging mechanism that is configured to allocate log record storage capacity in accordance with NIST SP 800-92 log record storage requirements.",
"iacontrols": null,
"id": "V-55959",
"ruleID": "SV-70213r1_rule",
"severity": "medium",
"title": "The web server must use a logging mechanism that is configured to allocate log record storage capacity large enough to accommodate the logging requirements of the web server.",
"version": "SRG-APP-000357-WSR-000150"
},
"V-55961": {
"checkid": "C-56531r2_chk",
"checktext": "Review the web server configuration to verify that the web server is restricting access from nonsecure zones.\n\nIf the web server is not configured to restrict access from nonsecure zones, then this is a finding.",
"description": "Remote access to the web server is any access that communicates through an external, non-organization-controlled network. Remote access can be used to access hosted applications or to perform management functions.\n\nA web server can be accessed remotely and must be capable of restricting access from what the DoD defines as nonsecure zones. Nonsecure zones are defined as any IP, subnet, or region that is defined as a threat to the organization. The nonsecure zones must be defined for public web servers logically located in a DMZ, as well as private web servers with perimeter protection devices. By restricting access from nonsecure zones, through internal web server access list, the web server can stop or slow denial of service (DoS) attacks on the web server.",
"fixid": "F-60839r1_fix",
"fixtext": "Configure the web server to block access from DoD-defined nonsecure zones.",
"iacontrols": null,
"id": "V-55961",
"ruleID": "SV-70215r1_rule",
"severity": "medium",
"title": "The web server must restrict inbound connections from nonsecure zones.",
"version": "SRG-APP-000315-WSR-000004"
},
"V-55969": {
"checkid": "C-56539r2_chk",
"checktext": "Review the web server documentation and deployment configuration to determine if the web server can write log data to, or if log data can be transferred to, a separate audit server.\n\nRequest a user access the hosted application and generate logable events and verify the data is written to a separate audit server.\n\nIf logs cannot be directly written or transferred on request or on a periodic schedule to an audit log server, this is a finding.",
"description": "Writing events to a centralized management audit system offers many benefits to the enterprise over having dispersed logs. Centralized management of audit records and logs provides for efficiency in maintenance and management of records, enterprise analysis of events, and backup and archiving of event records enterprise-wide. The web server and related components are required to be capable of writing logs to centralized audit log servers.",
"fixid": "F-60847r1_fix",
"fixtext": "Configure the web server to directly write or transfer the logs to a remote audit log server.",
"iacontrols": null,
"id": "V-55969",
"ruleID": "SV-70223r1_rule",
"severity": "medium",
"title": "The web server must not impede the ability to write specified log record content to an audit log server.",
"version": "SRG-APP-000358-WSR-000063"
},
"V-55971": {
"checkid": "C-56541r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine whether the web server is logging security-relevant events.\n\nDetermine whether there is a security tool in place that allows review and alert capabilities and whether the web server is sending events to this system.\n\nIf the web server is not, this is a finding.",
"description": "A web server will typically utilize logging mechanisms for maintaining a historical log of activity that occurs within a hosted application. This information can then be used for diagnostic purposes, forensics purposes, or other purposes relevant to ensuring the availability and integrity of the hosted application.\n\nWhile it is important to log events identified as being critical and relevant to security, it is equally important to notify the appropriate personnel in a timely manner so they are able to respond to events as they occur. \n\nManual review of the web server logs may not occur in a timely manner, and each event logged is open to interpretation by a reviewer. By integrating the web server into an overall or organization-wide log review, a larger picture of events can be viewed, and analysis can be done in a timely and reliable manner.",
"fixid": "F-60849r1_fix",
"fixtext": "Configure the web server to send logged events to the organization's security infrastructure tool that offers review and alert capabilities.",
"iacontrols": null,
"id": "V-55971",
"ruleID": "SV-70225r1_rule",
"severity": "medium",
"title": "The web server must be configurable to integrate with an organizations security infrastructure.",
"version": "SRG-APP-000358-WSR-000163"
},
"V-55973": {
"checkid": "C-56543r2_chk",
"checktext": "Review the web server documentation and deployment configuration settings to determine if the web server logging system provides an alert to the ISSO and the SA at a minimum when a processing failure occurs.\n\nIf alerts are not sent or the web server is not configured to use a dedicated logging tool that meets this requirement, this is a finding.",
"description": "Reviewing log data allows an investigator to recreate the path of an attacker and to capture forensic data for later use. Log data is also essential to system administrators in their daily administrative duties on the hosted system or within the hosted applications. \n\nIf the logging system begins to fail, events will not be recorded. Organizations shall define logging failure events, at which time the application or the logging mechanism the application utilizes will provide a warning to the ISSO and SA at a minimum.",
"fixid": "F-60851r2_fix",
"fixtext": "Configure the web server to provide an alert to the ISSO and SA when log processing failures occur.\n\nIf the web server cannot generate alerts, utilize an external logging system that meets this criterion.",
"iacontrols": null,
"id": "V-55973",
"ruleID": "SV-70227r1_rule",
"severity": "medium",
"title": "The web server must use a logging mechanism that is configured to alert the ISSO and SA in the event of a processing failure.",
"version": "SRG-APP-000108-WSR-000166"
},
"V-55975": {
"checkid": "C-56545r2_chk",
"checktext": "Review the web server documentation and deployment configuration settings to determine if the web server log system provides a warning to the ISSO and SA when allocated record storage volume reaches 75% of maximum record storage capacity.\n\nIf designated alerts are not sent or the web server is not configured to use a dedicated log tool that meets this requirement, this is a finding.",
"description": "It is critical for the appropriate personnel to be aware if a system is at risk of failing to process logs as required. Log processing failures include: software/hardware errors, failures in the log capturing mechanisms, and log storage capacity being reached or exceeded. \n\nIf log capacity were to be exceeded, then events subsequently occurring would not be recorded. Organizations shall define a maximum allowable percentage of storage capacity serving as an alarming threshold (e.g., web server has exceeded 75% of log storage capacity allocated), at which time the web server or the logging mechanism the web server utilizes will provide a warning to the ISSO and SA at a minimum. \n\nThis requirement can be met by configuring the web server to utilize a dedicated log tool that meets this requirement.",
"fixid": "F-60853r1_fix",
"fixtext": "Configure the web server to provide a warning to the ISSO and SA when allocated log record storage volume reaches 75% of maximum record storage capacity.",
"iacontrols": null,
"id": "V-55975",
"ruleID": "SV-70229r1_rule",
"severity": "medium",
"title": "The web server must use a logging mechanism that is configured to provide a warning to the ISSO and SA when allocated record storage volume reaches 75% of maximum log record storage capacity.",
"version": "SRG-APP-000359-WSR-000065"
},
"V-55977": {
"checkid": "C-56547r2_chk",
"checktext": "Review the web server documentation and configuration to determine if log records are time stamped to a minimum granularity of one second.\n\nHave a user generate a logable event and review the log data to determine if the web server is configured correctly.\n\nIf the log data does not contain a time stamp to a minimum granularity of one second, this is a finding.",
"description": "Without sufficient granularity of time stamps, it is not possible to adequately determine the chronological order of records. \n\nTime stamps generated by the web server include date and time and must be to a granularity of one second.",
"fixid": "F-60855r1_fix",
"fixtext": "Configure the web server to record log events with a time stamp to a granularity of one second.",
"iacontrols": null,
"id": "V-55977",
"ruleID": "SV-70231r1_rule",
"severity": "medium",
"title": "The web server must record time stamps for log records to a minimum granularity of one second.",
"version": "SRG-APP-000375-WSR-000171"
},
"V-55979": {
"checkid": "C-56549r2_chk",
"checktext": "Review the web server documentation and configuration to determine the time stamp format for log data.\n\nIf the time stamp is not mapped to UTC or GMT time, this is a finding.",
"description": "If time stamps are not consistently applied and there is no common time reference, it is difficult to perform forensic analysis across multiple devices and log records.\n\nTime stamps generated by the web server include date and time. Time is commonly expressed in Coordinated Universal Time (UTC), a modern continuation of Greenwich Mean Time (GMT), or local time with an offset from UTC.",
"fixid": "F-60857r1_fix",
"fixtext": "Configure the web server to store log data time stamps in a format that is mapped to UTC or GMT time.",
"iacontrols": null,
"id": "V-55979",
"ruleID": "SV-70233r1_rule",
"severity": "medium",
"title": "The web server must generate log records that can be mapped to Coordinated Universal Time (UTC) or Greenwich Mean Time (GMT).",
"version": "SRG-APP-000374-WSR-000172"
},
"V-55981": {
"checkid": "C-56551r2_chk",
"checktext": "Review the web server documentation and configuration to determine if the web server provides unique account roles specifically for the purposes of segmenting the responsibilities for managing the web server.\n\nLog into the hosting server using a web server role with limited permissions (e.g., Auditor, Developer, etc.) and verify the account is not able to perform configuration changes that are not related to that role.\n\nIf roles are not defined with limited permissions and restrictions, this is a finding.",
"description": "A web server can be modified through parameter modification, patch installation, upgrades to the web server or modules, and security parameter changes. With each of these changes, there is the potential for an adverse effect such as a DoS, web server instability, or hosted application instability.\n\nTo limit changes to the web server and limit exposure to any adverse effects from the changes, files such as the web server application files, libraries, and configuration files must have permissions and ownership set properly to only allow privileged users access.",
"fixid": "F-60859r2_fix",
"fixtext": "Define roles and responsibilities to be used when managing the web server.\n\nConfigure the hosting system to utilize specific roles that restrict access related to web server system and configuration changes.",
"iacontrols": null,
"id": "V-55981",
"ruleID": "SV-70235r1_rule",
"severity": "medium",
"title": "The web server application, libraries, and configuration files must only be accessible to privileged users.",
"version": "SRG-APP-000380-WSR-000072"
},
"V-55983": {
"checkid": "C-56553r2_chk",
"checktext": "Review the web server documentation and deployment configuration to determine if the web server validates files before the files are implemented into the running configuration.\n\nIf the web server does not meet this requirement and an external facility is not available for use, this is a finding.",
"description": "Being able to verify that a patch, upgrade, certificate, etc., being added to the web server is unchanged from the producer of the file is essential for file validation and non-repudiation of the information. \n\nThe web server or hosting system must have a mechanism to verify that files, before installation, are valid.\n\nExamples of validation methods are sha1 and md5 hashes and checksums.",
"fixid": "F-60861r1_fix",
"fixtext": "Configure the web server to verify object integrity before becoming part of the production web server or utilize an external tool designed to meet this requirement.",
"iacontrols": null,
"id": "V-55983",
"ruleID": "SV-70237r1_rule",
"severity": "medium",
"title": "All web server files must be verified for their integrity (e.g., checksums and hashes) before becoming part of the production web server.",
"version": "SRG-APP-000131-WSR-000051"
},
"V-55985": {
"checkid": "C-56555r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine if web server is configured in accordance with the security configuration settings based on DoD security configuration or implementation guidance.\n\nIf the web server is not configured according to the guidance, this is a finding.",
"description": "Configuring the web server to implement organization-wide security implementation guides and security checklists guarantees compliance with federal standards and establishes a common security baseline across the DoD that reflects the most restrictive security posture consistent with operational requirements. \n\nConfiguration settings are the set of parameters that can be changed that affect the security posture and/or functionality of the system. Security-related parameters are those parameters impacting the security state of the web server, including the parameters required to satisfy other security control requirements.",
"fixid": "F-60863r1_fix",
"fixtext": "Configure the web server to be configured according to DoD security configuration guidance.",
"iacontrols": null,
"id": "V-55985",
"ruleID": "SV-70239r1_rule",
"severity": "medium",
"title": "The web server must be configured in accordance with the security configuration settings based on DoD security configuration or implementation guidance, including STIGs, NSA configuration guides, CTOs, and DTMs.",
"version": "SRG-APP-000516-WSR-000174"
},
"V-55987": {
"checkid": "C-56557r2_chk",
"checktext": "Review the web server documentation and deployment configuration to determine what non-service/system accounts were installed by the web server installation process.\n\nVerify the passwords for these accounts have been set and/or changed from the default passwords.\n\nIf these accounts still have no password or default passwords, this is a finding.",
"description": "During installation of the web server software, accounts are created for the web server to operate properly. The accounts installed can have either no password installed or a default password, which will be known and documented by the vendor and the user community.\n\nThe first things an attacker will try when presented with a login screen are the default user identifiers with default passwords. Installed applications may also install accounts with no password, making the login even easier. Once the web server is installed, the passwords for any created accounts should be changed and documented. The new passwords must meet the requirements for all passwords, i.e., upper/lower characters, numbers, special characters, time until change, reuse policy, etc. \n\nService accounts or system accounts that have no login capability do not need to have passwords set or changed.",
"fixid": "F-60865r1_fix",
"fixtext": "Set passwords for non-service/system accounts containing no passwords and change the passwords for accounts which still have default passwords.",
"iacontrols": null,
"id": "V-55987",
"ruleID": "SV-70241r1_rule",
"severity": "medium",
"title": "All accounts installed with the web server software and tools must have passwords assigned and default passwords changed.",
"version": "SRG-APP-000516-WSR-000079"
},
"V-55989": {
"checkid": "C-56559r2_chk",
"checktext": "Review the web server documentation and configuration to determine if the web server is being used as a user management application.\n\nIf the web server is being used to perform user management for the hosted applications, this is a finding.",
"description": "User management and authentication can be an essential part of any application hosted by the web server. Along with authenticating users, the user management function must perform several other tasks like password complexity, locking users after a configurable number of failed logins, and management of temporary and emergency accounts; and all of this must be done enterprise-wide.\n\nThe web server contains a minimal user management function, but the web server user management function does not offer enterprise-wide user management, and user management is not the primary function of the web server. User management for the hosted applications should be done through a facility that is built for enterprise-wide user management, like LDAP and Active Directory.",
"fixid": "F-60867r1_fix",
"fixtext": "Configure the web server to disable user management functionality.",
"iacontrols": null,
"id": "V-55989",
"ruleID": "SV-70243r1_rule",
"severity": "medium",
"title": "The web server must not perform user management for hosted applications.",
"version": "SRG-APP-000141-WSR-000015"
},
"V-55991": {
"checkid": "C-56561r2_chk",
"checktext": "Review the web server documentation and deployment configuration to determine which ports and protocols are enabled.\n\nVerify that the ports and protocols being used are permitted, necessary for the operation of the web server and the hosted applications and are secure for a production system.\n\nIf any of the ports or protocols are not permitted, are nonsecure or are not necessary for web server operation, this is a finding.",
"description": "Web servers provide numerous processes, features, and functionalities that utilize TCP/IP ports. Some of these processes may be deemed unnecessary or too unsecure to run on a production system. \n\nThe web server must provide the capability to disable or deactivate network-related services that are deemed to be non-essential to the server mission, are too unsecure, or are prohibited by the PPSM CAL and vulnerability assessments.",
"fixid": "F-60869r1_fix",
"fixtext": "Configure the web server to disable any ports or protocols that are not permitted, are nonsecure for a production web server or are not necessary for web server operation.",
"iacontrols": null,
"id": "V-55991",
"ruleID": "SV-70245r1_rule",
"severity": "medium",
"title": "The web server must prohibit or restrict the use of nonsecure or unnecessary ports, protocols, modules, and/or services.",
"version": "SRG-APP-000383-WSR-000175"
},
"V-55993": {
"checkid": "C-56563r2_chk",
"checktext": "Review the web server documentation and configuration to determine if anonymous users can make changes to the web server or any applications hosted by the web server.\n\nIf anonymous users can make changes, this is a finding.",
"description": "In order to properly monitor the changes to the web server and the hosted applications, logging must be enabled. Along with logging being enabled, each record must properly contain the changes made and the names of those who made the changes.\n\nAllowing anonymous users the capability to change the web server or the hosted application will not generate proper log information that can then be used for forensic reporting in the case of a security issue. Allowing anonymous users to make changes will also grant change capabilities to anybody without forcing a user to authenticate before the changes can be made.",
"fixid": "F-60871r1_fix",
"fixtext": "Configure the web server to not allow anonymous users to change the web server or any hosted applications.",
"iacontrols": null,
"id": "V-55993",
"ruleID": "SV-70247r1_rule",
"severity": "medium",
"title": "Anonymous user access to the web server application directories must be prohibited.",
"version": "SRG-APP-000211-WSR-000031"
},
"V-55995": {
"checkid": "C-56565r2_chk",
"checktext": "Review the web server documentation and configuration to determine what web server accounts are available on the hosting server.\n\nIf non-privileged web server accounts are available with access to functions, directories, or files not needed for the role of the account, this is a finding.",
"description": "As a rule, accounts on a web server are to be kept to a minimum. Only administrators, web managers, developers, auditors, and web authors require accounts on the machine hosting the web server. The resources to which these accounts have access must also be closely monitored and controlled. Only the system administrator needs access to all the system's capabilities, while the web administrator and associated staff require access and control of the web content and web server configuration files.",
"fixid": "F-60873r1_fix",
"fixtext": "Limit the functions, directories, and files that are accessible by each account and role to administrative accounts and remove or modify non-privileged account access.",
"iacontrols": null,
"id": "V-55995",
"ruleID": "SV-70249r1_rule",
"severity": "medium",
"title": "Web server accounts accessing the directory tree, the shell, or other operating system functions and utilities must only be administrative accounts.",
"version": "SRG-APP-000211-WSR-000030"
},
"V-55997": {
"checkid": "C-56567r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine what parameters are set to tune the web server.\n\nReview the hosted applications along with risk analysis documents to determine the expected user traffic.\n\nIf the web server has not been tuned to avoid a DoS, this is a finding.",
"description": "A Denial of Service (DoS) can occur when the web server is so overwhelmed that it can no longer respond to additional requests. A web server not properly tuned may become overwhelmed and cause a DoS condition even with expected traffic from users. To avoid a DoS, the web server must be tuned to handle the expected traffic for the hosted applications.",
"fixid": "F-60875r2_fix",
"fixtext": "Analyze the expected user traffic for the hosted applications.\n\nTune the web server to avoid a DoS condition under normal user traffic to the hosted applications.",
"iacontrols": null,
"id": "V-55997",
"ruleID": "SV-70251r1_rule",
"severity": "medium",
"title": "The web server must be tuned to handle the operational requirements of the hosted application.",
"version": "SRG-APP-000435-WSR-000148"
},
"V-55999": {
"checkid": "C-56569r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine where the process ID is stored and which utilities are used to start/stop the web server.\n\nDetermine whether the process ID and the utilities are protected from non-privileged users.\n\nIf they are not protected, this is a finding.",
"description": "An attacker has at least two reasons to stop a web server. The first is to cause a DoS, and the second is to put in place changes the attacker made to the web server configuration. \n\nTo prohibit an attacker from stopping the web server, the process ID (pid) of the web server and the utilities used to start/stop the web server must be protected from access by non-privileged users. By knowing the pid and having access to the web server utilities, a non-privileged user has a greater capability of stopping the server, whether intentionally or unintentionally.",
"fixid": "F-60877r1_fix",
"fixtext": "Remove or modify non-privileged account access to the web server process ID and the utilities used for starting/stopping the web server.",
"iacontrols": null,
"id": "V-55999",
"ruleID": "SV-70253r1_rule",
"severity": "medium",
"title": "The web server must be protected from being stopped by a non-privileged user.",
"version": "SRG-APP-000435-WSR-000147"
},
"V-56001": {
"checkid": "C-56571r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine whether the transmission of data between the web server and external devices is encrypted.\n\nIf the web server does not encrypt the transmission, this is a finding.",
"description": "Preventing the disclosure of transmitted information requires that the web server take measures to employ some form of cryptographic mechanism in order to protect the information during transmission. This is usually achieved through the use of Transport Layer Security (TLS).\n\nTransmission of data can take place between the web server and a large number of devices/applications external to the web server. Examples are a web client used by a user, a backend database, an audit server, or other web servers in a web cluster.\n\nIf data is transmitted unencrypted, the data then becomes vulnerable to disclosure. The disclosure may reveal user identifier/password combinations, website code revealing business logic, or other user personal information.",
"fixid": "F-60879r1_fix",
"fixtext": "Configure the web server to encrypt the transmission of data between the web server and external devices.",
"iacontrols": null,
"id": "V-56001",
"ruleID": "SV-70255r1_rule",
"severity": "medium",
"title": "The web server must employ cryptographic mechanisms (TLS/DTLS/SSL) preventing the unauthorized disclosure of information during transmission.",
"version": "SRG-APP-000439-WSR-000151"
},
"V-56003": {
"checkid": "C-56573r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine whether the session identifier is being sent to the client encrypted.\n\nIf the web server does not encrypt the session identifier, this is a finding.",
"description": "The HTTP protocol is a stateless protocol. To maintain a session, a session identifier is used. The session identifier is a piece of data that is used to identify a session and a user. If the session identifier is compromised by an attacker, the session can be hijacked. By encrypting the session identifier, the identifier becomes more difficult for an attacker to hijack, decrypt, and use before the session has expired.",
"fixid": "F-60881r1_fix",
"fixtext": "Configure the web server to encrypt the session identifier for transmission to the client.",
"iacontrols": null,
"id": "V-56003",
"ruleID": "SV-70257r1_rule",
"severity": "medium",
"title": "Web server session IDs must be sent to the client using SSL/TLS.",
"version": "SRG-APP-000439-WSR-000152"
},
"V-56005": {
"checkid": "C-56575r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine whether cookies are being sent to the client using SSL/TLS.\n\nIf the transmission is through a SSL/TLS connection, but the cookie is not being compressed, this finding is NA.\n\nIf the web server is using SSL/TLS for cookie transmission and the cookie is also being compressed, this is a finding.",
"description": "A cookie is used when a web server needs to share data with the client's browser. The data is often used to remember the client when the client returns to the hosted application at a later date. A session cookie is a special type of cookie used to remember the client during the session. The cookie will contain the session identifier (ID) and may contain authentication data to the hosted application. To protect this data from easily being compromised, the cookie can be encrypted.\n\nWhen a cookie is sent encrypted via SSL/TLS, an attacker must spend a great deal of time and resources to decrypt the cookie. If, along with encryption, the cookie is compressed, the attacker can now use a combination of plaintext injection and inadvertent information leakage through data compression to reduce the time needed to decrypt the cookie. This attack is called Compression Ratio Info-leak Made Easy (CRIME).\n\nCookies shared between the web server and the client when encrypted should not also be compressed.",
"fixid": "F-60883r1_fix",
"fixtext": "Configure the web server to send the cookie to the client via SSL/TLS without using cookie compression.",
"iacontrols": null,
"id": "V-56005",
"ruleID": "SV-70259r1_rule",
"severity": "medium",
"title": "Web server cookies, such as session cookies, sent to the client using SSL/TLS must not be compressed.",
"version": "SRG-APP-000439-WSR-000153"
},
"V-56007": {
"checkid": "C-56577r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine how to disable client-side scripts from reading cookies.\n\nIf the web server is not configured to disallow client-side scripts from reading cookies, this is a finding.",
"description": "A cookie can be read by client-side scripts easily if cookie properties are not set properly. By allowing cookies to be read by the client-side scripts, information such as session identifiers could be compromised and used by an attacker who intercepts the cookie. Setting cookie properties (i.e. HttpOnly property) to disallow client-side scripts from reading cookies better protects the information inside the cookie.",
"fixid": "F-60885r1_fix",
"fixtext": "Configure the web server to disallow client-side scripts the capability of reading cookie information.",
"iacontrols": null,
"id": "V-56007",
"ruleID": "SV-70261r1_rule",
"severity": "medium",
"title": "Cookies exchanged between the web server and the client, such as session cookies, must have cookie properties set to prohibit client-side scripts from reading the cookie data.",
"version": "SRG-APP-000439-WSR-000154"
},
"V-56009": {
"checkid": "C-56579r2_chk",
"checktext": "Review the web server documentation and deployed configuration to verify that cookies are encrypted before transmission.\n\nIf the web server is not configured to encrypt cookies, this is a finding.",
"description": "Cookies can be sent to a client using TLS/SSL to encrypt the cookies, but TLS/SSL is not used by every hosted application since the data being displayed does not require the encryption of the transmission. To safeguard against cookies, especially session cookies, being sent in plaintext, a cookie can be encrypted before transmission. To force a cookie to be encrypted before transmission, the cookie Secure property can be set.",
"fixid": "F-60887r1_fix",
"fixtext": "Configure the web server to encrypt cookies before transmission.",
"iacontrols": null,
"id": "V-56009",
"ruleID": "SV-70263r1_rule",
"severity": "medium",
"title": "Cookies exchanged between the web server and the client, such as session cookies, must have cookie properties set to force the encryption of cookies.",
"version": "SRG-APP-000439-WSR-000155"
},
"V-56011": {
"checkid": "C-56581r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine which version of TLS is being used.\n\nIf the TLS version is not an approved version according to NIST SP 800-52 or non-FIPS-approved algorithms are enabled, this is a finding.",
"description": "Transport Layer Security (TLS) is a required transmission protocol for a web server hosting controlled information. The use of TLS provides confidentiality of data in transit between the web server and client. FIPS 140-2 approved TLS versions must be enabled and non-FIPS-approved SSL versions must be disabled.\n\nNIST SP 800-52 defines the approved TLS versions for government applications.",
"fixid": "F-60889r1_fix",
"fixtext": "Configure the web server to use an approved TLS version according to NIST SP 800-52 and to disable all non-approved versions.",
"iacontrols": null,
"id": "V-56011",
"ruleID": "SV-70265r1_rule",
"severity": "medium",
"title": "A web server must maintain the confidentiality of controlled information during transmission through the use of an approved TLS version.",
"version": "SRG-APP-000439-WSR-000156"
},
"V-56013": {
"checkid": "C-56583r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine if the web server maintains the confidentiality and integrity of information during preparation before transmission.\n\nIf the confidentiality and integrity are not maintained, this is a finding.",
"description": "Information can be either unintentionally or maliciously disclosed or modified during preparation for transmission, including, for example, during aggregation, at protocol transformation points, and during packing/unpacking. These unauthorized disclosures or modifications compromise the confidentiality or integrity of the information.\n\nAn example of this would be an SMTP queue. This queue may be added to a web server through an SMTP module to enhance error reporting or to allow developers to add SMTP functionality to their applications. \n\nAny modules used by the web server that queue data before transmission must maintain the confidentiality and integrity of the information before the data is transmitted.",
"fixid": "F-60891r1_fix",
"fixtext": "Configure the web server to maintain the confidentiality and integrity of information during preparation for transmission.",
"iacontrols": null,
"id": "V-56013",
"ruleID": "SV-70267r1_rule",
"severity": "medium",
"title": "The web server must maintain the confidentiality and integrity of information during preparation for transmission.",
"version": "SRG-APP-000441-WSR-000181"
},
"V-56015": {
"checkid": "C-56585r2_chk",
"checktext": "Review web server configuration to determine if the server is using a transmission method that maintains the confidentiality and integrity of information during reception.\n\nIf a transmission method is not being used that maintains the confidentiality and integrity of the data during reception, this is a finding.",
"description": "Information can be either unintentionally or maliciously disclosed or modified during reception, including, for example, during aggregation, at protocol transformation points, and during packing/unpacking. These unauthorized disclosures or modifications compromise the confidentiality or integrity of the information.\n\nProtecting the confidentiality and integrity of received information requires that application servers take measures to employ approved cryptography in order to protect the information during transmission over the network. This is usually achieved through the use of Transport Layer Security (TLS), SSL VPN, or IPsec tunnel. \n\nThe web server must utilize approved encryption when receiving transmitted data.",
"fixid": "F-60893r1_fix",
"fixtext": "Configure the web server to utilize a transmission method that maintains the confidentiality and integrity of information during reception.",
"iacontrols": null,
"id": "V-56015",
"ruleID": "SV-70269r1_rule",
"severity": "medium",
"title": "The web server must maintain the confidentiality and integrity of information during reception.",
"version": "SRG-APP-000442-WSR-000182"
},
"V-56017": {
"checkid": "C-56587r2_chk",
"checktext": "Review policy documents to identify data that is compartmentalized (i.e. classified, sensitive, need-to-know, etc.) and requires cryptographic protection.\n\nReview the web server documentation and deployed configuration to identify the encryption modules utilized to protect the compartmentalized data.\n\nIf the encryption modules used to protect the compartmentalized data are not compliant with the data, this is a finding.",
"description": "Cryptography is only as strong as the encryption modules/algorithms employed to encrypt the data. \n\nUse of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data. \n\nNSA has developed Type 1 algorithms for protecting classified information. The Committee on National Security Systems (CNSS) National Information Assurance Glossary (CNSS Instruction No. 4009) defines Type 1 products as:\n\n\"Cryptographic equipment, assembly or component classified or certified by NSA for encrypting and decrypting classified and sensitive national security information when appropriately keyed. Developed using established NSA business processes and containing NSA-approved algorithms are used to protect systems requiring the most stringent protection mechanisms.\"\n\nAlthough persons may have a security clearance, they may not have a \"need-to-know\" and are required to be separated from the information in question. The web server must employ NSA-approved cryptography to protect classified information from those individuals who have no \"need-to-know\" or when encryption of compartmentalized data is required by data classification.",
"fixid": "F-60895r1_fix",
"fixtext": "Configure the web server to utilize cryptography when protecting compartmentalized data.",
"iacontrols": null,
"id": "V-56017",
"ruleID": "SV-70271r1_rule",
"severity": "medium",
"title": "The web server must implement required cryptographic protections using cryptographic modules complying with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance when encrypting data that must be compartmentalized.",
"version": "SRG-APP-000416-WSR-000118"
},
"V-56019": {
"checkid": "C-56589r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine whether mobile code used by hosted applications follows the DoD policies on the acquisition, development, and/or use of mobile code.\n\nIf the web server is not configured to follow the DoD policies on mobile code, this is a finding.",
"description": "Mobile code in hosted applications allows the developer to add functionality and displays to hosted applications that are fluid, as opposed to a static web page. The data presentation becomes more appealing to the user, is easier to analyze, and navigation through the hosted application and data is much less complicated.\n\nSome mobile code technologies in use in today's applications are: Java, JavaScript, ActiveX, PDF, Postscript, Shockwave movies, Flash animations, and VBScript. The DoD has created policies that define the usage of mobile code on DoD systems. The usage restrictions and implementation guidance apply to both the selection and use of mobile code installed on organizational servers and mobile code downloaded and executed on individual workstations.\n\nThe web server may host applications that contain mobile code and therefore, must meet the DoD-defined requirements regarding the deployment and/or use of mobile code. This includes digitally signing applets in order to provide a means for the client to establish application authenticity.",
"fixid": "F-60897r1_fix",
"fixtext": "Configure the web server to follow the DoD policies on mobile code.",
"iacontrols": null,
"id": "V-56019",
"ruleID": "SV-70273r1_rule",
"severity": "medium",
"title": "A web server utilizing mobile code must meet DoD-defined mobile code requirements.",
"version": "SRG-APP-000206-WSR-000128"
},
"V-56021": {
"checkid": "C-56591r2_chk",
"checktext": "Review the web server documentation and deployed configuration to verify that the web server is configured to invalidate session identifiers when a session is terminated.\n\nIf the web server does not invalidate session identifiers when a session is terminated, this is a finding.",
"description": "Captured sessions can be reused in \"replay\" attacks. This requirement limits the ability of adversaries from capturing and continuing to employ previously valid session IDs.\n\nSession IDs are tokens generated by web applications to uniquely identify an application user's session. Unique session IDs help to reduce predictability of said identifiers. When a user logs out, or when any other session termination event occurs, the web server must terminate the user session to minimize the potential for an attacker to hijack that particular user session.",
"fixid": "F-60899r1_fix",
"fixtext": "Configure the web server to invalidate session identifiers when a session is terminated.",
"iacontrols": null,
"id": "V-56021",
"ruleID": "SV-70275r1_rule",
"severity": "medium",
"title": "The web server must invalidate session identifiers upon hosted application user logout or other session termination.",
"version": "SRG-APP-000220-WSR-000201"
},
"V-56023": {
"checkid": "C-56593r2_chk",
"checktext": "Review the web server documentation and deployed configuration to verify that the web server is configured to generate unique session identifiers with a FIPS 140-2 approved random number generator.\n\nRequest two users access the web server and view the session identifier generated for each user to verify that the session IDs are not sequential.\n\nIf the web server is not configured to generate unique session identifiers or the random number generator is not FIPS 140-2 approved, this is a finding.",
"description": "Communication between a client and the web server is done using the HTTP protocol, but HTTP is a stateless protocol. In order to maintain a connection or session, a web server will generate a session identifier (ID) for each client session when the session is initiated. The session ID allows the web server to track a user session and, in many cases, the user, if the user previously logged into a hosted application.\n\nUnique session IDs are the opposite of sequentially generated session IDs, which can be easily guessed by an attacker. Unique session identifiers help to reduce predictability of generated identifiers. Unique session IDs address man-in-the-middle attacks, including session hijacking or insertion of false information into a session. If the attacker is unable to identify or guess the session information related to pending application traffic, the attacker will have more difficulty in hijacking the session or otherwise manipulating valid sessions.",
"fixid": "F-60901r1_fix",
"fixtext": "Configure the web server to generate unique session identifiers using a FIPS 140-2 random number generator.",
"iacontrols": null,
"id": "V-56023",
"ruleID": "SV-70277r1_rule",
"severity": "medium",
"title": "The web server must generate a unique session identifier for each session using a FIPS 140-2 approved random number generator.",
"version": "SRG-APP-000224-WSR-000135"
},
"V-56025": {
"checkid": "C-56595r2_chk",
"checktext": "Review the web server documentation and configuration to determine if cookies between the web server and client are accessible by applications or web servers other than the originating pair.\n\nIf the cookie information is accessible outside the originating pair, this is a finding.",
"description": "Cookies are used to exchange data between the web server and the client. Cookies, such as a session cookie, may contain session information and user credentials used to maintain a persistent connection between the user and the hosted application since HTTP/HTTPS is a stateless protocol. \n\nWhen the cookie parameters are not set properly (i.e., domain and path parameters), cookies can be shared within hosted applications residing on the same web server or to applications hosted on different web servers residing on the same domain.",
"fixid": "F-60903r1_fix",
"fixtext": "Configure the web server to set properties within cookies to disallow the cookie to be accessed by other web servers and applications.",
"iacontrols": null,
"id": "V-56025",
"ruleID": "SV-70279r1_rule",
"severity": "medium",
"title": "Cookies exchanged between the web server and client, such as session cookies, must have security settings that disallow cookie access outside the originating web server and hosted application.",
"version": "SRG-APP-000223-WSR-000011"
},
"V-56027": {
"checkid": "C-56597r2_chk",
"checktext": "Review the web server deployed configuration to determine if the web server will accept client certificates issued by unapproved PKIs. The authoritative list of DoD-approved PKIs is published at http://iase.disa.mil/pki-pke/interoperability.\n\nIf the web server will accept non-DoD approved PKI client certificates, this is a finding.",
"description": "Non-DoD approved PKIs have not been evaluated to ensure that they have security controls and identity vetting procedures in place which are sufficient for DoD systems to rely on the identity asserted in the certificate. PKIs lacking sufficient security controls and identity vetting procedures risk being compromised and issuing certificates that enable adversaries to impersonate legitimate users.",
"fixid": "F-60905r1_fix",
"fixtext": "Configure the web server to only accept DoD and DoD-approved PKI client certificates.",
"iacontrols": null,
"id": "V-56027",
"ruleID": "SV-70281r1_rule",
"severity": "medium",
"title": "The web server must only accept client certificates issued by DoD PKI or DoD-approved PKI Certification Authorities (CAs).",
"version": "SRG-APP-000427-WSR-000186"
},
"V-56029": {
"checkid": "C-56599r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine if the web server offers the capability to reinstall from a known state.\n\nIf the web server does not offer this capability, determine if the web server, in any manner, prohibits the reinstallation of a known state.\n\nIf the web server does prohibit the reinstallation to a known state, this is a finding.",
"description": "Making certain that the web server has not been updated by an unauthorized user is always a concern. Adding patches, functions, and modules that are untested and not part of the baseline opens the possibility for security risks. The web server must offer, and not hinder, a method that allows for the quick and easy reinstallation of a verified and patched baseline to guarantee the production web server is up-to-date and has not been modified to add functionality or expose security risks.\n\nWhen the web server does not offer a method to roll back to a clean baseline, external methods, such as a baseline snapshot or virtualizing the web server, can be used.",
"fixid": "F-60907r1_fix",
"fixtext": "Configure the web server to augment and not hinder the reinstallation of a known and stable baseline.",
"iacontrols": null,
"id": "V-56029",
"ruleID": "SV-70283r1_rule",
"severity": "medium",
"title": "The web server must augment re-creation to a stable and known baseline.",
"version": "SRG-APP-000225-WSR-000074"
},
"V-56031": {
"checkid": "C-56601r2_chk",
"checktext": "Review the web server documentation and deployed configuration to determine whether the web server is authorizing and managing users.\n\nIf the web server is not authorizing and managing users, this is NA. \n\nIf the web server is the user authenticator and manager, verify that stored user identifiers and passwords are being encrypted by the web server. If the user information is not being encrypted when stored, this is a finding.",
"description": "When data is written to digital media, such as hard drives, mobile computers, external/removable hard drives, personal digital assistants, flash/thumb drives, etc., there is risk of data loss and data compromise. User identities and passwords stored on the hard drive of the hosting hardware must be encrypted to protect the data from easily being discovered and used by an unauthorized user to access the hosted applications. The cryptographic libraries and functionality used to store and retrieve the user identifiers and passwords must be part of the web server.",
"fixid": "F-60909r1_fix",
"fixtext": "Configure the web server to encrypt the user identifiers and passwords when storing them on digital media.",
"iacontrols": null,
"id": "V-56031",
"ruleID": "SV-70285r1_rule",
"severity": "medium",
"title": "The web server must encrypt user identifiers and passwords.",
"version": "SRG-APP-000429-WSR-000113"
},
"V-56033": {
"checkid": "C-56603r2_chk",
"checktext": "Review the web server documentation and configuration to determine if the web server checks for patches from an authoritative source at least every 24 hours.\n\nIf there is no timeframe or the timeframe is greater than 24 hours, this is a finding.",
"description": "Security flaws with software applications are discovered daily. Vendors are constantly updating and patching their products to address newly discovered security vulnerabilities. Organizations (including any contractor to the organization) are required to promptly install security-relevant software updates (e.g., patches, service packs, and hot fixes). Flaws discovered during security assessments, continuous monitoring, incident response activities, or information system error handling must also be addressed expeditiously. \n\nThe web server will be configured to check for and install security-relevant software updates from an authoritative source within an identified time period from the availability of the update. By default, this time period will be every 24 hours.",
"fixid": "F-60911r1_fix",
"fixtext": "Configure the web server to check for patches and updates from an authoritative source at least every 24 hours.",
"iacontrols": null,
"id": "V-56033",
"ruleID": "SV-70287r1_rule",
"severity": "medium",
"title": "The web server must install security-relevant software updates within the configured time period directed by an authoritative source (e.g. IAVM, CTOs, DTMs, and STIGs).",
"version": "SRG-APP-000456-WSR-000187"
},
"V-56035": {
"checkid": "C-56605r2_chk",
"checktext": "Review the web server documentation and deployed configuration to locate all the web document directories.\n\nVerify that each web document directory contains a default hosted application web page that can be used by the web server in the event a web page cannot be found.\n\nIf a document directory does not contain a default web page, this is a finding.",
"description": "The goal is to completely control the web user's experience in navigating any portion of the web document root directories. Ensuring all web content directories have at least the equivalent of an index.html file is a significant factor to accomplish this end.\n\nEnumeration techniques, such as URL parameter manipulation, rely upon being able to obtain information about the web server's directory structure by locating directories without default pages. In the scenario, the web server will display to the user a listing of the files in the directory being accessed. By having a default hosted application web page, the anonymous web user will not obtain directory browsing information or an error message that reveals the server type and version.",
"fixid": "F-60913r1_fix",
"fixtext": "Place a default web page in every web document directory.",
"iacontrols": null,
"id": "V-56035",
"ruleID": "SV-70289r1_rule",
"severity": "medium",
"title": "The web server must display a default hosted application web page, not a directory listing, when a requested web page cannot be found.",
"version": "SRG-APP-000266-WSR-000142"
}
},
"profiles": {
"MAC-1_Classified": {
"description": "",
"findings": {
"V-40791": "true",
"V-40792": "true",
"V-40799": "true",
"V-40800": "true",
"V-40819": "true",
"V-41600": "true",
"V-41609": "true",
"V-41611": "true",
"V-41612": "true",
"V-41613": "true",
"V-41614": "true",
"V-41615": "true",
"V-41616": "true",
"V-41617": "true",
"V-41620": "true",
"V-41668": "true",
"V-41670": "true",
"V-41671": "true",
"V-41672": "true",
"V-41674": "true",
"V-41684": "true",
"V-41693": "true",
"V-41694": "true",
"V-41695": "true",
"V-41696": "true",
"V-41698": "true",
"V-41699": "true",
"V-41700": "true",
"V-41701": "true",
"V-41702": "true",
"V-41703": "true",
"V-41704": "true",
"V-41706": "true",
"V-41730": "true",
"V-41731": "true",
"V-41738": "true",
"V-41745": "true",
"V-41746": "true",
"V-41794": "true",
"V-41807": "true",
"V-41808": "true",
"V-41809": "true",
"V-41810": "true",
"V-41811": "true",
"V-41812": "true",
"V-41815": "true",
"V-41818": "true",
"V-41821": "true",
"V-41833": "true",
"V-41852": "true",
"V-41854": "true",
"V-41855": "true",
"V-55945": "true",
"V-55947": "true",
"V-55949": "true",
"V-55951": "true",
"V-55953": "true",
"V-55955": "true",
"V-55957": "true",
"V-55959": "true",
"V-55961": "true",
"V-55969": "true",
"V-55971": "true",
"V-55973": "true",
"V-55975": "true",
"V-55977": "true",
"V-55979": "true",
"V-55981": "true",
"V-55983": "true",
"V-55985": "true",
"V-55987": "true",
"V-55989": "true",
"V-55991": "true",
"V-55993": "true",
"V-55995": "true",
"V-55997": "true",
"V-55999": "true",
"V-56001": "true",
"V-56003": "true",
"V-56005": "true",
"V-56007": "true",
"V-56009": "true",
"V-56011": "true",
"V-56013": "true",
"V-56015": "true",
"V-56017": "true",
"V-56019": "true",
"V-56021": "true",
"V-56023": "true",
"V-56025": "true",
"V-56027": "true",
"V-56029": "true",
"V-56031": "true",
"V-56033": "true",
"V-56035": "true"
},
"id": "MAC-1_Classified",
"title": "I - Mission Critical Classified"
},
"MAC-1_Public": {
"description": "",
"findings": {
"V-40791": "true",
"V-40792": "true",
"V-40799": "true",
"V-40800": "true",
"V-40819": "true",
"V-41600": "true",
"V-41609": "true",
"V-41611": "true",
"V-41612": "true",
"V-41613": "true",
"V-41614": "true",
"V-41615": "true",
"V-41616": "true",
"V-41617": "true",
"V-41620": "true",
"V-41668": "true",
"V-41670": "true",
"V-41671": "true",
"V-41672": "true",
"V-41674": "true",
"V-41684": "true",
"V-41693": "true",
"V-41694": "true",
"V-41695": "true",
"V-41696": "true",
"V-41698": "true",
"V-41699": "true",
"V-41700": "true",
"V-41701": "true",
"V-41702": "true",
"V-41703": "true",
"V-41704": "true",
"V-41706": "true",
"V-41730": "true",
"V-41731": "true",
"V-41738": "true",
"V-41745": "true",
"V-41746": "true",
"V-41794": "true",
"V-41807": "true",
"V-41808": "true",
"V-41809": "true",
"V-41810": "true",
"V-41811": "true",
"V-41812": "true",
"V-41815": "true",
"V-41818": "true",
"V-41821": "true",
"V-41833": "true",
"V-41852": "true",
"V-41854": "true",
"V-41855": "true",
"V-55945": "true",
"V-55947": "true",
"V-55949": "true",
"V-55951": "true",
"V-55953": "true",
"V-55955": "true",
"V-55957": "true",
"V-55959": "true",
"V-55961": "true",
"V-55969": "true",
"V-55971": "true",
"V-55973": "true",
"V-55975": "true",
"V-55977": "true",
"V-55979": "true",
"V-55981": "true",
"V-55983": "true",
"V-55985": "true",
"V-55987": "true",
"V-55989": "true",
"V-55991": "true",
"V-55993": "true",
"V-55995": "true",
"V-55997": "true",
"V-55999": "true",
"V-56001": "true",
"V-56003": "true",
"V-56005": "true",
"V-56007": "true",
"V-56009": "true",
"V-56011": "true",
"V-56013": "true",
"V-56015": "true",
"V-56017": "true",
"V-56019": "true",
"V-56021": "true",
"V-56023": "true",
"V-56025": "true",
"V-56027": "true",
"V-56029": "true",
"V-56031": "true",
"V-56033": "true",
"V-56035": "true"
},
"id": "MAC-1_Public",
"title": "I - Mission Critical Public"
},
"MAC-1_Sensitive": {
"description": "",
"findings": {
"V-40791": "true",
"V-40792": "true",
"V-40799": "true",
"V-40800": "true",
"V-40819": "true",
"V-41600": "true",
"V-41609": "true",
"V-41611": "true",
"V-41612": "true",
"V-41613": "true",
"V-41614": "true",
"V-41615": "true",
"V-41616": "true",
"V-41617": "true",
"V-41620": "true",
"V-41668": "true",
"V-41670": "true",
"V-41671": "true",
"V-41672": "true",
"V-41674": "true",
"V-41684": "true",
"V-41693": "true",
"V-41694": "true",
"V-41695": "true",
"V-41696": "true",
"V-41698": "true",
"V-41699": "true",
"V-41700": "true",
"V-41701": "true",
"V-41702": "true",
"V-41703": "true",
"V-41704": "true",
"V-41706": "true",
"V-41730": "true",
"V-41731": "true",
"V-41738": "true",
"V-41745": "true",
"V-41746": "true",
"V-41794": "true",
"V-41807": "true",
"V-41808": "true",
"V-41809": "true",
"V-41810": "true",
"V-41811": "true",
"V-41812": "true",
"V-41815": "true",
"V-41818": "true",
"V-41821": "true",
"V-41833": "true",
"V-41852": "true",
"V-41854": "true",
"V-41855": "true",
"V-55945": "true",
"V-55947": "true",
"V-55949": "true",
"V-55951": "true",
"V-55953": "true",
"V-55955": "true",
"V-55957": "true",
"V-55959": "true",
"V-55961": "true",
"V-55969": "true",
"V-55971": "true",
"V-55973": "true",
"V-55975": "true",
"V-55977": "true",
"V-55979": "true",
"V-55981": "true",
"V-55983": "true",
"V-55985": "true",
"V-55987": "true",
"V-55989": "true",
"V-55991": "true",
"V-55993": "true",
"V-55995": "true",
"V-55997": "true",
"V-55999": "true",
"V-56001": "true",
"V-56003": "true",
"V-56005": "true",
"V-56007": "true",
"V-56009": "true",
"V-56011": "true",
"V-56013": "true",
"V-56015": "true",
"V-56017": "true",
"V-56019": "true",
"V-56021": "true",
"V-56023": "true",
"V-56025": "true",
"V-56027": "true",
"V-56029": "true",
"V-56031": "true",
"V-56033": "true",
"V-56035": "true"
},
"id": "MAC-1_Sensitive",
"title": "I - Mission Critical Sensitive"
},
"MAC-2_Classified": {
"description": "",
"findings": {
"V-40791": "true",
"V-40792": "true",
"V-40799": "true",
"V-40800": "true",
"V-40819": "true",
"V-41600": "true",
"V-41609": "true",
"V-41611": "true",
"V-41612": "true",
"V-41613": "true",
"V-41614": "true",
"V-41615": "true",
"V-41616": "true",
"V-41617": "true",
"V-41620": "true",
"V-41668": "true",
"V-41670": "true",
"V-41671": "true",
"V-41672": "true",
"V-41674": "true",
"V-41684": "true",
"V-41693": "true",
"V-41694": "true",
"V-41695": "true",
"V-41696": "true",
"V-41698": "true",
"V-41699": "true",
"V-41700": "true",
"V-41701": "true",
"V-41702": "true",
"V-41703": "true",
"V-41704": "true",
"V-41706": "true",
"V-41730": "true",
"V-41731": "true",
"V-41738": "true",
"V-41745": "true",
"V-41746": "true",
"V-41794": "true",
"V-41807": "true",
"V-41808": "true",
"V-41809": "true",
"V-41810": "true",
"V-41811": "true",
"V-41812": "true",
"V-41815": "true",
"V-41818": "true",
"V-41821": "true",
"V-41833": "true",
"V-41852": "true",
"V-41854": "true",
"V-41855": "true",
"V-55945": "true",
"V-55947": "true",
"V-55949": "true",
"V-55951": "true",
"V-55953": "true",
"V-55955": "true",
"V-55957": "true",
"V-55959": "true",
"V-55961": "true",
"V-55969": "true",
"V-55971": "true",
"V-55973": "true",
"V-55975": "true",
"V-55977": "true",
"V-55979": "true",
"V-55981": "true",
"V-55983": "true",
"V-55985": "true",
"V-55987": "true",
"V-55989": "true",
"V-55991": "true",
"V-55993": "true",
"V-55995": "true",
"V-55997": "true",
"V-55999": "true",
"V-56001": "true",
"V-56003": "true",
"V-56005": "true",
"V-56007": "true",
"V-56009": "true",
"V-56011": "true",
"V-56013": "true",
"V-56015": "true",
"V-56017": "true",
"V-56019": "true",
"V-56021": "true",
"V-56023": "true",
"V-56025": "true",
"V-56027": "true",
"V-56029": "true",
"V-56031": "true",
"V-56033": "true",
"V-56035": "true"
},
"id": "MAC-2_Classified",
"title": "II - Mission Support Classified"
},
"MAC-2_Public": {
"description": "",
"findings": {
"V-40791": "true",
"V-40792": "true",
"V-40799": "true",
"V-40800": "true",
"V-40819": "true",
"V-41600": "true",
"V-41609": "true",
"V-41611": "true",
"V-41612": "true",
"V-41613": "true",
"V-41614": "true",
"V-41615": "true",
"V-41616": "true",
"V-41617": "true",
"V-41620": "true",
"V-41668": "true",
"V-41670": "true",
"V-41671": "true",
"V-41672": "true",
"V-41674": "true",
"V-41684": "true",
"V-41693": "true",
"V-41694": "true",
"V-41695": "true",
"V-41696": "true",
"V-41698": "true",
"V-41699": "true",
"V-41700": "true",
"V-41701": "true",
"V-41702": "true",
"V-41703": "true",
"V-41704": "true",
"V-41706": "true",
"V-41730": "true",
"V-41731": "true",
"V-41738": "true",
"V-41745": "true",
"V-41746": "true",
"V-41794": "true",
"V-41807": "true",
"V-41808": "true",
"V-41809": "true",
"V-41810": "true",
"V-41811": "true",
"V-41812": "true",
"V-41815": "true",
"V-41818": "true",
"V-41821": "true",
"V-41833": "true",
"V-41852": "true",
"V-41854": "true",
"V-41855": "true",
"V-55945": "true",
"V-55947": "true",
"V-55949": "true",
"V-55951": "true",
"V-55953": "true",
"V-55955": "true",
"V-55957": "true",
"V-55959": "true",
"V-55961": "true",
"V-55969": "true",
"V-55971": "true",
"V-55973": "true",
"V-55975": "true",
"V-55977": "true",
"V-55979": "true",
"V-55981": "true",
"V-55983": "true",
"V-55985": "true",
"V-55987": "true",
"V-55989": "true",
"V-55991": "true",
"V-55993": "true",
"V-55995": "true",
"V-55997": "true",
"V-55999": "true",
"V-56001": "true",
"V-56003": "true",
"V-56005": "true",
"V-56007": "true",
"V-56009": "true",
"V-56011": "true",
"V-56013": "true",
"V-56015": "true",
"V-56017": "true",
"V-56019": "true",
"V-56021": "true",
"V-56023": "true",
"V-56025": "true",
"V-56027": "true",
"V-56029": "true",
"V-56031": "true",
"V-56033": "true",
"V-56035": "true"
},
"id": "MAC-2_Public",
"title": "II - Mission Support Public"
},
"MAC-2_Sensitive": {
"description": "",
"findings": {
"V-40791": "true",
"V-40792": "true",
"V-40799": "true",
"V-40800": "true",
"V-40819": "true",
"V-41600": "true",
"V-41609": "true",
"V-41611": "true",
"V-41612": "true",
"V-41613": "true",
"V-41614": "true",
"V-41615": "true",
"V-41616": "true",
"V-41617": "true",
"V-41620": "true",
"V-41668": "true",
"V-41670": "true",
"V-41671": "true",
"V-41672": "true",
"V-41674": "true",
"V-41684": "true",
"V-41693": "true",
"V-41694": "true",
"V-41695": "true",
"V-41696": "true",
"V-41698": "true",
"V-41699": "true",
"V-41700": "true",
"V-41701": "true",
"V-41702": "true",
"V-41703": "true",
"V-41704": "true",
"V-41706": "true",
"V-41730": "true",
"V-41731": "true",
"V-41738": "true",
"V-41745": "true",
"V-41746": "true",
"V-41794": "true",
"V-41807": "true",
"V-41808": "true",
"V-41809": "true",
"V-41810": "true",
"V-41811": "true",
"V-41812": "true",
"V-41815": "true",
"V-41818": "true",
"V-41821": "true",
"V-41833": "true",
"V-41852": "true",
"V-41854": "true",
"V-41855": "true",
"V-55945": "true",
"V-55947": "true",
"V-55949": "true",
"V-55951": "true",
"V-55953": "true",
"V-55955": "true",
"V-55957": "true",
"V-55959": "true",
"V-55961": "true",
"V-55969": "true",
"V-55971": "true",
"V-55973": "true",
"V-55975": "true",
"V-55977": "true",
"V-55979": "true",
"V-55981": "true",
"V-55983": "true",
"V-55985": "true",
"V-55987": "true",
"V-55989": "true",
"V-55991": "true",
"V-55993": "true",
"V-55995": "true",
"V-55997": "true",
"V-55999": "true",
"V-56001": "true",
"V-56003": "true",
"V-56005": "true",
"V-56007": "true",
"V-56009": "true",
"V-56011": "true",
"V-56013": "true",
"V-56015": "true",
"V-56017": "true",
"V-56019": "true",
"V-56021": "true",
"V-56023": "true",
"V-56025": "true",
"V-56027": "true",
"V-56029": "true",
"V-56031": "true",
"V-56033": "true",
"V-56035": "true"
},
"id": "MAC-2_Sensitive",
"title": "II - Mission Support Sensitive"
},
"MAC-3_Classified": {
"description": "",
"findings": {
"V-40791": "true",
"V-40792": "true",
"V-40799": "true",
"V-40800": "true",
"V-40819": "true",
"V-41600": "true",
"V-41609": "true",
"V-41611": "true",
"V-41612": "true",
"V-41613": "true",
"V-41614": "true",
"V-41615": "true",
"V-41616": "true",
"V-41617": "true",
"V-41620": "true",
"V-41668": "true",
"V-41670": "true",
"V-41671": "true",
"V-41672": "true",
"V-41674": "true",
"V-41684": "true",
"V-41693": "true",
"V-41694": "true",
"V-41695": "true",
"V-41696": "true",
"V-41698": "true",
"V-41699": "true",
"V-41700": "true",
"V-41701": "true",
"V-41702": "true",
"V-41703": "true",
"V-41704": "true",
"V-41706": "true",
"V-41730": "true",
"V-41731": "true",
"V-41738": "true",
"V-41745": "true",
"V-41746": "true",
"V-41794": "true",
"V-41807": "true",
"V-41808": "true",
"V-41809": "true",
"V-41810": "true",
"V-41811": "true",
"V-41812": "true",
"V-41815": "true",
"V-41818": "true",
"V-41821": "true",
"V-41833": "true",
"V-41852": "true",
"V-41854": "true",
"V-41855": "true",
"V-55945": "true",
"V-55947": "true",
"V-55949": "true",
"V-55951": "true",
"V-55953": "true",
"V-55955": "true",
"V-55957": "true",
"V-55959": "true",
"V-55961": "true",
"V-55969": "true",
"V-55971": "true",
"V-55973": "true",
"V-55975": "true",
"V-55977": "true",
"V-55979": "true",
"V-55981": "true",
"V-55983": "true",
"V-55985": "true",
"V-55987": "true",
"V-55989": "true",
"V-55991": "true",
"V-55993": "true",
"V-55995": "true",
"V-55997": "true",
"V-55999": "true",
"V-56001": "true",
"V-56003": "true",
"V-56005": "true",
"V-56007": "true",
"V-56009": "true",
"V-56011": "true",
"V-56013": "true",
"V-56015": "true",
"V-56017": "true",
"V-56019": "true",
"V-56021": "true",
"V-56023": "true",
"V-56025": "true",
"V-56027": "true",
"V-56029": "true",
"V-56031": "true",
"V-56033": "true",
"V-56035": "true"
},
"id": "MAC-3_Classified",
"title": "III - Administrative Classified"
},
"MAC-3_Public": {
"description": "",
"findings": {
"V-40791": "true",
"V-40792": "true",
"V-40799": "true",
"V-40800": "true",
"V-40819": "true",
"V-41600": "true",
"V-41609": "true",
"V-41611": "true",
"V-41612": "true",
"V-41613": "true",
"V-41614": "true",
"V-41615": "true",
"V-41616": "true",
"V-41617": "true",
"V-41620": "true",
"V-41668": "true",
"V-41670": "true",
"V-41671": "true",
"V-41672": "true",
"V-41674": "true",
"V-41684": "true",
"V-41693": "true",
"V-41694": "true",
"V-41695": "true",
"V-41696": "true",
"V-41698": "true",
"V-41699": "true",
"V-41700": "true",
"V-41701": "true",
"V-41702": "true",
"V-41703": "true",
"V-41704": "true",
"V-41706": "true",
"V-41730": "true",
"V-41731": "true",
"V-41738": "true",
"V-41745": "true",
"V-41746": "true",
"V-41794": "true",
"V-41807": "true",
"V-41808": "true",
"V-41809": "true",
"V-41810": "true",
"V-41811": "true",
"V-41812": "true",
"V-41815": "true",
"V-41818": "true",
"V-41821": "true",
"V-41833": "true",
"V-41852": "true",
"V-41854": "true",
"V-41855": "true",
"V-55945": "true",
"V-55947": "true",
"V-55949": "true",
"V-55951": "true",
"V-55953": "true",
"V-55955": "true",
"V-55957": "true",
"V-55959": "true",
"V-55961": "true",
"V-55969": "true",
"V-55971": "true",
"V-55973": "true",
"V-55975": "true",
"V-55977": "true",
"V-55979": "true",
"V-55981": "true",
"V-55983": "true",
"V-55985": "true",
"V-55987": "true",
"V-55989": "true",
"V-55991": "true",
"V-55993": "true",
"V-55995": "true",
"V-55997": "true",
"V-55999": "true",
"V-56001": "true",
"V-56003": "true",
"V-56005": "true",
"V-56007": "true",
"V-56009": "true",
"V-56011": "true",
"V-56013": "true",
"V-56015": "true",
"V-56017": "true",
"V-56019": "true",
"V-56021": "true",
"V-56023": "true",
"V-56025": "true",
"V-56027": "true",
"V-56029": "true",
"V-56031": "true",
"V-56033": "true",
"V-56035": "true"
},
"id": "MAC-3_Public",
"title": "III - Administrative Public"
},
"MAC-3_Sensitive": {
"description": "",
"findings": {
"V-40791": "true",
"V-40792": "true",
"V-40799": "true",
"V-40800": "true",
"V-40819": "true",
"V-41600": "true",
"V-41609": "true",
"V-41611": "true",
"V-41612": "true",
"V-41613": "true",
"V-41614": "true",
"V-41615": "true",
"V-41616": "true",
"V-41617": "true",
"V-41620": "true",
"V-41668": "true",
"V-41670": "true",
"V-41671": "true",
"V-41672": "true",
"V-41674": "true",
"V-41684": "true",
"V-41693": "true",
"V-41694": "true",
"V-41695": "true",
"V-41696": "true",
"V-41698": "true",
"V-41699": "true",
"V-41700": "true",
"V-41701": "true",
"V-41702": "true",
"V-41703": "true",
"V-41704": "true",
"V-41706": "true",
"V-41730": "true",
"V-41731": "true",
"V-41738": "true",
"V-41745": "true",
"V-41746": "true",
"V-41794": "true",
"V-41807": "true",
"V-41808": "true",
"V-41809": "true",
"V-41810": "true",
"V-41811": "true",
"V-41812": "true",
"V-41815": "true",
"V-41818": "true",
"V-41821": "true",
"V-41833": "true",
"V-41852": "true",
"V-41854": "true",
"V-41855": "true",
"V-55945": "true",
"V-55947": "true",
"V-55949": "true",
"V-55951": "true",
"V-55953": "true",
"V-55955": "true",
"V-55957": "true",
"V-55959": "true",
"V-55961": "true",
"V-55969": "true",
"V-55971": "true",
"V-55973": "true",
"V-55975": "true",
"V-55977": "true",
"V-55979": "true",
"V-55981": "true",
"V-55983": "true",
"V-55985": "true",
"V-55987": "true",
"V-55989": "true",
"V-55991": "true",
"V-55993": "true",
"V-55995": "true",
"V-55997": "true",
"V-55999": "true",
"V-56001": "true",
"V-56003": "true",
"V-56005": "true",
"V-56007": "true",
"V-56009": "true",
"V-56011": "true",
"V-56013": "true",
"V-56015": "true",
"V-56017": "true",
"V-56019": "true",
"V-56021": "true",
"V-56023": "true",
"V-56025": "true",
"V-56027": "true",
"V-56029": "true",
"V-56031": "true",
"V-56033": "true",
"V-56035": "true"
},
"id": "MAC-3_Sensitive",
"title": "III - Administrative Sensitive"
}
},
"slug": "web_server_security_requirements_guide",
"title": "Web Server Security Requirements Guide",
"version": "2"
}
}