UCF STIG Viewer Logo

The ESXi host must enable audit logging.


Overview

Finding ID Version Rule ID IA Controls Severity
V-258787 ESXI-80-000232 SV-258787r933422_rule Medium
Description
ESXi offers both local and remote audit recordkeeping to meet the requirements of the NIAP Virtualization Protection Profile and Server Virtualization Extended Package. Local records are stored on any accessible local or VMFS path. Remote records are sent to the global syslog servers configured elsewhere. To operate in the NIAP validated state, ESXi must enable and properly configure this audit system. This system is disabled by default. Note: Audit records can be viewed locally via the "/bin/viewAudit" utility over SSH or at the ESXi shell.
STIG Date
VMware vSphere 8.0 ESXi Security Technical Implementation Guide 2023-10-11

Details

Check Text ( C-62527r933420_chk )
From the vSphere Client, go to Hosts and Clusters.

Select the ESXi Host >> Configure >> System >> Advanced System Settings.

Select the "Syslog.global.auditRecord.storageEnable" value and verify it is set to "true".

or

From a PowerCLI command prompt while connected to the ESXi host, run the following command:

Get-VMHost | Get-AdvancedSetting -Name Syslog.global.auditRecord.storageEnable

If the "Syslog.global.auditRecord.storageEnable" setting is not set to "true", this is a finding.
Fix Text (F-62436r933421_fix)
From the vSphere Client, go to Hosts and Clusters.

Select the ESXi Host >> Configure >> System >> Advanced System Settings.

Click "Edit". Select the "Syslog.global.auditRecord.storageEnable" value and configure it to "true".

or

From a PowerCLI command prompt while connected to the ESXi host, run the following command:

Get-VMHost | Get-AdvancedSetting -Name Syslog.global.auditRecord.storageEnable | Set-AdvancedSetting -Value "true"