The Red Hat Enterprise Linux operating system must prevent Internet Protocol version 4 (IPv4) Internet Control Message Protocol (ICMP) redirect messages from being accepted.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-204614	RHEL-07-040640	SV-204614r505924_rule		Medium

Description
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.

STIG	Date
Red Hat Enterprise Linux 7 Security Technical Implementation Guide	2020-09-03

Details

Check Text ( C-4738r89034_chk )

Verify the system will not accept IPv4 ICMP redirect messages. # grep 'net.ipv4.conf.default.accept_redirects' /etc/sysctl.conf /etc/sysctl.d/* If " net.ipv4.conf.default.accept_redirects " is not configured in the /etc/sysctl.conf file or in the /etc/sysctl.d/ directory, is commented out, or does not have a value of "0", this is a finding. Check that the operating system implements the value of the "accept_redirects" variables with the following command: # /sbin/sysctl -a | grep 'net.ipv4.conf.default.accept_redirects' net.ipv4.conf.default.accept_redirects = 0 If the returned line does not have a value of "0", this is a finding.

Fix Text (F-4738r89035_fix)
Set the system to not accept IPv4 ICMP redirect messages by adding the following line to "/etc/sysctl.conf" or a configuration file in the /etc/sysctl.d/ directory (or modify the line to have the required value): net.ipv4.conf.default.accept_redirects = 0 Issue the following command to make the changes take effect: # sysctl --system