The snmpd service must use only SNMP protocol version 3 or newer.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-38660 | RHEL-06-000340 | SV-50461r1_rule | Medium |
| Description |
|---|
| Earlier versions of SNMP are considered insecure, as they potentially allow unauthorized access to detailed system management information. |
| STIG | Date |
|---|---|
| Red Hat Enterprise Linux 6 Security Technical Implementation Guide | 2015-05-26 |
Details
| Check Text ( C-46215r1_chk ) |
|---|
| To ensure only SNMPv3 or newer is used, run the following command: # grep 'v1\|v2c\|com2sec' /etc/snmp/snmpd.conf | grep -v '^#' There should be no output. If there is output, this is a finding. |
| Fix Text (F-43604r1_fix) |
|---|
| Edit "/etc/snmp/snmpd.conf", removing any references to "v1", "v2c", or "com2sec". Upon doing that, restart the SNMP service: # service snmpd restart |