UCF STIG Viewer Logo

OL 8 systems below version 8.2 must ensure account lockouts persist.


Overview

Finding ID Version Rule ID IA Controls Severity
V-248658 OL08-00-020016 SV-248658r853781_rule Medium
Description
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, otherwise known as brute-force attacks, is reduced. Limits are imposed by locking the account. OL 8 can use the "pam_faillock.so" for this purpose. Note that manual changes to the listed files may be overwritten by the "authselect" program. From "Pam_Faillock" man pages: Note that the default directory that "pam_faillock" uses is usually cleared on system boot so the access will be reenabled after system reboot. If that is undesirable, a different tally directory must be set with the "dir" option. Satisfies: SRG-OS-000021-GPOS-00005, SRG-OS-000329-GPOS-00128
STIG Date
Oracle Linux 8 Security Technical Implementation Guide 2022-12-06

Details

Check Text ( C-52092r779538_chk )
Verify the faillock directory contents persist after a reboot with the following commands:

Note: If the System Administrator demonstrates the use of an approved centralized account management method that locks an account after three unsuccessful logon attempts within a period of 15 minutes, this requirement is not applicable.

Note: This check applies to OL versions 8.0 and 8.1. If the system is OL version 8.2 or newer, this check is not applicable.

$ sudo grep pam_faillock.so /etc/pam.d/password-auth

auth required pam_faillock.so preauth dir=/var/log/faillock silent audit deny=3 even_deny_root fail_interval=900 unlock_time=0
auth required pam_faillock.so authfail dir=/var/log/faillock unlock_time=0
account required pam_faillock.so

If the "dir" option is not set to a non-default documented tally log directory on the "preauth" and "authfail" lines with the "pam_faillock.so" module or is missing from these lines, this is a finding.

$ sudo grep pam_faillock.so /etc/pam.d/system-auth

auth required pam_faillock.so preauth dir=/var/log/faillock silent audit deny=3 even_deny_root fail_interval=900 unlock_time=0
auth required pam_faillock.so authfail dir=/var/log/faillock unlock_time=0
account required pam_faillock.so

If the "dir" option is not set to a non-default documented tally log directory on the "preauth" and "authfail" lines with the "pam_faillock.so" module or is missing from these lines, this is a finding.
Fix Text (F-52046r779539_fix)
Configure the operating system maintain the contents of the faillock directory after a reboot.

Add/modify the appropriate sections of the "/etc/pam.d/system-auth" and "/etc/pam.d/password-auth" files to match the following lines.

Note: Using the default faillock directory of "/var/run/faillock" will result in the contents being cleared in the event of a reboot.

auth required pam_faillock.so preauth dir=/var/log/faillock silent audit deny=3 even_deny_root fail_interval=900 unlock_time=0
auth required pam_faillock.so authfail dir=/var/log/faillock unlock_time=0
account required pam_faillock.so

The "sssd" service must be restarted for the changes to take effect. To restart the "sssd" service, run the following command:

$ sudo systemctl restart sssd.service