UCF STIG Viewer Logo

Network WLAN AP-IG Management Security Technical Implementation Guide


Overview

Date Finding Count (19)
2021-04-16 CAT I (High): 6 CAT II (Med): 13 CAT III (Low): 0
STIG Description
This Security Technical Implementation Guide is published as a tool to improve the security of Department of Defense (DoD) information systems. The requirements are derived from the National Institute of Standards and Technology (NIST) 800-53 and related documents. Comments or proposed revisions to this document should be sent via email to the following address: disa.stig_spt@mail.mil.

Available Profiles



Findings (MAC III - Administrative Public)

Finding ID Severity Title
V-243138 High The network device must terminate all network connections associated with a device management session at the end of the session, or the session must be terminated after 10 minutes of inactivity except to fulfill documented and validated mission requirements.
V-243144 High The network device must be configured to use an authentication server to authenticate users prior to granting administrative access.
V-243141 High The network device must be configured to implement cryptographic mechanisms using a FIPS 140-2 approved algorithm to protect the confidentiality of remote maintenance sessions.
V-243143 High The network device must be running an operating system release that is currently supported by the vendor.
V-243148 High The network device must be configured to prohibit the use of all unnecessary and/or nonsecure functions, ports, protocols, and/or services.
V-243140 High The network device must enforce the assigned privilege level for each administrator and authorizations for access to all commands relative to the privilege level in accordance with applicable policy for the device.
V-243145 Medium The network device must be configured to authenticate SNMP messages using a FIPS-validated Keyed-Hash Message Authentication Code (HMAC).
V-243134 Medium The password configured on the WLAN access point for key generation and client access must be set to a 15-character or longer complex password as required by USCYBERCOM CTO 07-15 Rev1.
V-243135 Medium The network device must enforce a minimum 15-character password length.
V-243136 Medium The network device must not have any default manufacturer passwords when deployed.
V-243137 Medium The network device must display the Standard Mandatory DoD Notice and Consent Banner before granting access to the device.
V-243139 Medium The network device must be configured to authenticate each administrator prior to authorizing privileges based on assignment of group or role.
V-243147 Medium The network device must be configured to enforce the limit of three consecutive invalid logon attempts, after which time it must block any login attempt for 15 minutes.
V-243152 Medium The network device must be configured to synchronize internal information system clocks using redundant authoritative time sources.
V-243150 Medium The network device must implement replay-resistant authentication mechanisms for network access to privileged accounts.
V-243151 Medium The network device must be configured with both an ingress and egress ACL.
V-243146 Medium The network device must be configured with only one local account to be used as the account of last resort in the event the authentication server is unavailable.
V-243142 Medium The network device must generate audit records when successful/unsuccessful logon attempts occur.
V-243149 Medium The network device must authenticate Network Time Protocol (NTP) sources using authentication that is cryptographically based.