UCF STIG Viewer Logo
Changes are coming to https://stigviewer.com. Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey

The router must use its loopback or OOB management interface address as the source address when originating syslog traffic.


Overview

Finding ID Version Rule ID IA Controls Severity
V-14673 NET0898 SV-15339r2_rule ECSC-1 Low
Description
Using a loopback address as the source address offers a multitude of uses for security, access, management, and scalability of routers. It is easier to construct appropriate ingress filters for router management plane traffic destined to the network management subnet since the source addresses will be from the range used for loopback interfaces instead of a larger range of addresses used for physical interfaces. Log information recorded by authentication and syslog servers will record the router’s loopback address instead of the numerous physical interface addresses. Syslog messages sent to management servers should use the loopback address as the source address.
STIG Date
IPSec VPN Gateway Security Technical Implementation Guide 2013-10-08

Details

Check Text ( C-12805r3_chk )
Review the configuration and verify the loopback interface address is used as the source address when originating syslog traffic. If the device is managed from an OOB management network, the OOB interface must be used instead.
Fix Text (F-14135r3_fix)
Configure the router to use its loopback or OOB management interface address as the source address when originating syslog traffic.