UCF STIG Viewer Logo

The HP FlexFabric Switch must not have the default VLAN assigned to any host-facing switch ports.


Finding ID Version Rule ID IA Controls Severity
V-66087 HFFS-L2-000025 SV-80577r1_rule Medium
In a VLAN-based network, switches use the default VLAN (i.e., VLAN 1) for in-band management and to communicate with other networking devices using Spanning-Tree Protocol (STP), Dynamic Trunking Protocol (DTP), VLAN Trunking Protocol (VTP), and Port Aggregation Protocol (PAgP)—all untagged traffic. As a consequence, the default VLAN may unwisely span the entire network if not appropriately pruned. If its scope is large enough, the risk of compromise can increase significantly.
HP FlexFabric Switch L2S Security Technical Implementation Guide 2020-06-03


Check Text ( C-66731r1_chk )
Review the HP FlexFabric Switch configurations and verify that no access switch ports have been assigned membership to the default VLAN (i.e., VLAN 1). A good method of ensuring there is not membership to the default VLAN is to have it disabled (i.e., shutdown) on the switch.

If there are access switch ports assigned to the default VLAN, this is a finding.

display vlan 1
VLAN type: Static
Route interface: Configured:
Description: VLAN 0001
Name: VLAN 0001
Tagged ports: None
Untagged ports:
GigabitEthernet1/0/1 GigabitEthernet1/0/2
GigabitEthernet1/0/3 GigabitEthernet1/0/4

Fix Text (F-72163r1_fix)
Remove the assignment of the default VLAN from all access switch ports.

display vlan 1

[HP-vlan2]port GigabitEthernet 1/0/1 to GigabitEthernet 1/0/48