The Cisco out-of-band management (OOBM) gateway router must be configured to block any traffic destined to itself that is not sourced from the OOBM network or the Network Operations Center (NOC).

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-216772	CISC-RT-000440	SV-216772r531087_rule		Medium

Description
If the gateway router is not a dedicated device for the OOBM network, several safeguards must be implemented for containment of management and production traffic boundaries. It is imperative that hosts from the managed network are not able to access the OOBM gateway router.

STIG	Date
Cisco IOS XR Router RTR Security Technical Implementation Guide	2020-09-23

Details

Check Text ( C-18004r288699_chk )

This requirement is not applicable for the DODIN Backbone. It is only applicable if the OOBM gateway router is not a dedicated device to the OOBM backbone. Verify that traffic destined to itself is only sourced by the OOBM or the NOC. In the example below, the OOBM backbone network is 10.11.1.0/24, the NOC address spaces is 10.12.1.0/24, and the OOBM LAN address space at remote site connecting to the managed network is 10.13.1.0/24. Step 1: Note the inbound ACL applied to the OOBM interfaces. interface GigabitEthernet0/0/0/2 description OOB link to NOC ip address 10.11.1.8 255.255.255.0 ipv4 access-group TRAFFIC_FROM_NOC ingress ! interface Giga GigabitEthernet0/0/0/3 description link to OOBM LAN access switch ip address 10.13.1.1 255.255.255.0 ipv4 access-group TRAFFIC_TO_NOC ingress Step 2: Review the inbound ACL bound to any OOB interface connecting to the OOBM backbone and verify traffic destined to itself is only from the OOBM or NOC address space. ipv4 access-list TRAFFIC_FROM_NOC 10 permit ipv4 10.11.1.0 0.255.255.255 host 10.11.1.8 20 permit ipv4 10.12.1.0 0.255.255.255 host 10.11.1.8 30 permit ipv4 10.11.1.0 0.255.255.255 host 10.13.1.1 40 permit ipv4 10.12.1.0 0.255.255.255 host 10.13.1.1 50 deny ipv4 any host 10.11.1.8 log-input 60 deny ipv4 any host 10.13.1.1 log-input 70 permit ipv4 10.11.1.0 0.0.0.255 10.13.1.0 0.0.0.255 80 permit ipv4 10.12.1.0 0.0.0.255 10.13.1.0 0.0.0.255 90 deny ipv4 any any log-input Step 3: Review the inbound ACL bound to any OOBM LAN interfaces and verify traffic destined to itself is from the OOBM LAN address space. ipv4 access-list TRAFFIC_TO_NOC 10 permit ipv4 10.13.1.0 0.255.255.255 host 10.13.1.1 20 permit ipv4 10.13.1.0 0.255.255.255 host 10.11.1.8 30 deny ipv4 any host 10.13.1.1 log-input 40 deny ipv4 any host 10.11.1.8 log-input 50 permit ipv4 10.13.1.0 0.255.255.255 10.11.1.0 0.0.0.255 60 permit ipv4 10.13.1.0 0.255.255.255 10.12.1.0 0.0.0.255 70 deny ipv4 any any log-input If the router does not block any traffic destined to itself that is not sourced from the OOBM network or the NOC, this is a finding.

Fix Text (F-18002r288700_fix)

This requirement is not applicable for the DODIN Backbone. It is only applicable if the OOBM gateway router is not a dedicated device to the OOBM backbone. Step 1: Configure the ACL to only allow traffic to the route processor from the OOBM backbone and the NOC. RP/0/0/CPU0:R2(config)#ipv4 access-list TRAFFIC_FROM_NOC RP/0/0/CPU0:R2(config-ipv4-acl)#permit ip 10.11.1.0 0.255.255.255 host 10.11.$ RP/0/0/CPU0:R2(config-ipv4-acl)#permit ip 10.12.1.0 0.255.255.255 host 10.11.$ RP/0/0/CPU0:R2(config-ipv4-acl)#permit ip 10.11.1.0 0.255.255.255 host 10.13.$ RP/0/0/CPU0:R2(config-ipv4-acl)#permit ip 10.12.1.0 0.255.255.255 host 10.13.$ RP/0/0/CPU0:R2(config-ipv4-acl)#deny ip any host 10.11.1.8 log-input RP/0/0/CPU0:R2(config-ipv4-acl)#deny ip any host 10.13.1.1 log-input RP/0/0/CPU0:R2(config-ipv4-acl)#permit ip 10.11.1.0 0.0.0.255 10.13.1.0 0.0.0$ RP/0/0/CPU0:R2(config-ipv4-acl)#permit ip 10.12.1.0 0.0.0.255 10.13.1.0 0.0.0$ RP/0/0/CPU0:R2(config-ipv4-acl)#deny ip any any log-input RP/0/0/CPU0:R2(config-ipv4-acl)#exit Step 2: Configure the ACL to only allow traffic to the route processor from the OOBM LAN. RP/0/0/CPU0:R2(config)#ipv4 access-list TRAFFIC_TO_NOC RP/0/0/CPU0:R2(config-ipv4-acl)#permit ip 10.13.1.0 0.255.255.255 host 10.13.$ RP/0/0/CPU0:R2(config-ipv4-acl)#permit ip 10.13.1.0 0.255.255.255 host 10.11.$ RP/0/0/CPU0:R2(config-ipv4-acl)#deny ip any host 10.13.1.1 log-input RP/0/0/CPU0:R2(config-ipv4-acl)#deny ip any host 10.11.1.8 log-input RP/0/0/CPU0:R2(config-ipv4-acl)#permit ip 10.13.1.0 0.255.255.255 10.11.1.0 0$ RP/0/0/CPU0:R2(config-ipv4-acl)#permit ip 10.13.1.0 0.255.255.255 10.12.1.0 0$ RP/0/0/CPU0:R2(config-ipv4-acl)#deny ip any any log-input RP/0/0/CPU0:R2(config-ipv4-acl)#exit Step 3: Apply the ACLs configured above to the appropriate OOBM interfaces as shown in the example below. RP/0/0/CPU0:R2(config)#int g0/0/0/2 RP/0/0/CPU0:R2(config-if)#ipv4 access-group TRAFFIC_FROM_NOC in RP/0/0/CPU0:R2(config)#int g0/0/0/3 RP/0/0/CPU0:R2(config-if)#access-group TRAFFIC_TO_NOC in RP/0/0/CPU0:R2(config-if)#end