The Cisco perimeter router must be configured to enforce approved authorizations for controlling the flow of information between interconnected networks in accordance with applicable policy.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-96713	CISC-RT-000250	SV-105851r1_rule		Medium

Description
Information flow control regulates authorized information to travel within a network and between interconnected networks. Controlling the flow of network traffic is critical so it does not introduce any unacceptable risk to the network infrastructure or data. An example of a flow control restriction is blocking outside traffic claiming to be from within the organization. For most routers, internal information flow control is a product of system design.

Description

Information flow control regulates authorized information to travel within a network and between interconnected networks. Controlling the flow of network traffic is critical so it does not introduce any unacceptable risk to the network infrastructure or data. An example of a flow control restriction is blocking outside traffic claiming to be from within the organization. For most routers, internal information flow control is a product of system design.

STIG	Date
Cisco IOS XR Router RTR Security Technical Implementation Guide	2019-07-24

Details

Check Text ( C-95549r1_chk )
Review the router configuration to verify that ACLs are configured to allow or deny traffic for specific source and destination addresses as well as ports and protocols. In the example below, the router is peering BGP with DISN. ICMP echo and echo-reply packets are allowed for troubleshooting connectivity. WWW traffic is permitted inbound to the NIPRNet host-facing web server (x.12.1.22). ipv4 access-list EXTERNAL_ACL_INBOUND 10 permit tcp host x.11.1.1 eq bgp host x.11.1.2 20 permit tcp host x.11.1.1 host x.11.1.2 eq bgp 30 permit icmp host x.11.1.1 host x.11.1.2 echo 40 permit icmp host x.11.1.1 host x.11.1.2 echo-reply 50 deny ipv4 any host x.11.1.1 log 60 permit tcp any host x.12.1.22 eq www 70 permit tcp any any established 80 deny ipv4 any any log-input … … … interface GigabitEthernet0/0/0/1 ipv4 address x.11.1.2 255.255.255.252 ipv4 access-group EXTERNAL_ACL_INBOUND ingress If the router is not configured to enforce approved authorizations for controlling the flow of information within the network based on organization-defined information flow control policies, this is a finding.

Check Text ( C-95549r1_chk )

Review the router configuration to verify that ACLs are configured to allow or deny traffic for specific source and destination addresses as well as ports and protocols. In the example below, the router is peering BGP with DISN. ICMP echo and echo-reply packets are allowed for troubleshooting connectivity. WWW traffic is permitted inbound to the NIPRNet host-facing web server (x.12.1.22).

ipv4 access-list EXTERNAL_ACL_INBOUND
10 permit tcp host x.11.1.1 eq bgp host x.11.1.2
20 permit tcp host x.11.1.1 host x.11.1.2 eq bgp
30 permit icmp host x.11.1.1 host x.11.1.2 echo
40 permit icmp host x.11.1.1 host x.11.1.2 echo-reply
50 deny ipv4 any host x.11.1.1 log
60 permit tcp any host x.12.1.22 eq www
70 permit tcp any any established
80 deny ipv4 any any log-input
…
…
…
interface GigabitEthernet0/0/0/1
ipv4 address x.11.1.2 255.255.255.252
ipv4 access-group EXTERNAL_ACL_INBOUND ingress

If the router is not configured to enforce approved authorizations for controlling the flow of information within the network based on organization-defined information flow control policies, this is a finding.

Fix Text (F-102391r1_fix)
This requirement is not applicable for the DODIN Backbone. Step 1: Configure an ACL to allow or deny traffic for specific source and destination addresses as well as ports and protocols between various subnets as required. The commands used below were used to create the configuration as shown in the check content. RP/0/0/CPU0:R3(config)#ipv4 access-list EXTERNAL_ACL_INBOUND RP/0/0/CPU0:R3(config-ipv4-acl)#permit tcp host x.11.1.1 eq bgp host x.11.1.2 RP/0/0/CPU0:R3(config-ipv4-acl)#permit tcp host x.11.1.1 host x.11.1.2 eq bgp RP/0/0/CPU0:R3(config-ipv4-acl)#permit icmp host x.11.1.1 host x.11.1.2 echo RP/0/0/CPU0:R3(config-ipv4-acl)#permit icmp host x.11.1.1 host x.11.1.2 echo-reply RP/0/0/CPU0:R3(config-ipv4-acl)#deny ip any host x.11.1.1 log-input RP/0/0/CPU0:R3(config-ipv4-acl)#permit tcp any host x.12.1.22 eq www RP/0/0/CPU0:R3(config-ipv4-acl)#permit tcp any any established RP/0/0/CPU0:R3(config-ipv4-acl)#deny ip any any log-input RP/0/0/CPU0:R3(config-ipv4-acl)#exit Step 2: Apply the ACL inbound on all applicable interfaces. RP/0/0/CPU0:R3(config)#int g0/0/0/1 RP/0/0/CPU0:R3(config-if)#ipv4 access-group EXTERNAL_ACL_INBOUND in RP/0/0/CPU0:R3(config-if)#end

Fix Text (F-102391r1_fix)

This requirement is not applicable for the DODIN Backbone.

Step 1: Configure an ACL to allow or deny traffic for specific source and destination addresses as well as ports and protocols between various subnets as required. The commands used below were used to create the configuration as shown in the check content.

RP/0/0/CPU0:R3(config)#ipv4 access-list EXTERNAL_ACL_INBOUND
RP/0/0/CPU0:R3(config-ipv4-acl)#permit tcp host x.11.1.1 eq bgp host x.11.1.2
RP/0/0/CPU0:R3(config-ipv4-acl)#permit tcp host x.11.1.1 host x.11.1.2 eq bgp
RP/0/0/CPU0:R3(config-ipv4-acl)#permit icmp host x.11.1.1 host x.11.1.2 echo
RP/0/0/CPU0:R3(config-ipv4-acl)#permit icmp host x.11.1.1 host x.11.1.2 echo-reply
RP/0/0/CPU0:R3(config-ipv4-acl)#deny ip any host x.11.1.1 log-input
RP/0/0/CPU0:R3(config-ipv4-acl)#permit tcp any host x.12.1.22 eq www
RP/0/0/CPU0:R3(config-ipv4-acl)#permit tcp any any established
RP/0/0/CPU0:R3(config-ipv4-acl)#deny ip any any log-input
RP/0/0/CPU0:R3(config-ipv4-acl)#exit

Step 2: Apply the ACL inbound on all applicable interfaces.

RP/0/0/CPU0:R3(config)#int g0/0/0/1
RP/0/0/CPU0:R3(config-if)#ipv4 access-group EXTERNAL_ACL_INBOUND in
RP/0/0/CPU0:R3(config-if)#end